commit	59136af1dfc67ae61463317cf515900085472e5f	[log] [tgz]
author	Brian O'Connor <bocon@opennetworking.org>	Thu Aug 03 22:45:45 2017 -0700
committer	Brian O'Connor <bocon@opennetworking.org>	Thu Aug 03 22:45:45 2017 -0700
tree	1f50ddb75b9a4f1cd4415d4d57c5f983ca75dcfa
parent	9062322cffd03d2c56b66d040ad13bc562bb6544 [diff]

tree: 1f50ddb75b9a4f1cd4415d4d57c5f983ca75dcfa

README.md

PassiveTest Pre-reqs

PassiveTest requires the following images (in the xos_services/PassiveTest folder):

  mcord_taa.qcow2 (The main xos probe service for PassiveTest)

  viv.docker      (The container providing the tapping service)

If the images are not in the current folder, running the Makefile targets will attempt to download them from a private repo (internal to Viavi). So if you do not have access to the private repo, download them separately prior to running this step

Onboarding PassiveTest and tapping agent

Run make viv followed by make passivetest
(Note: running make viv only needs to be done once. If you need to redeploy passivetest or any of the other services, make viv does not need to be performed again (unless another compute node was added/removed/rebooted)
Ensure that the mysite_passivetest_slice VM has two networks (run nova list --all-tenants) **Note: XOS has a race condition that the passivetest VM may only come up with one network

Onboarding A-CORD

Run make cord-monitoringservice followed by make install-inframonitoring-agents followed by make enable-inframonitoring
Ensure that the ceilometer VMs have two networks (run nova list --all-tenants) **Note: XOS has a race condition that the VM may only come up with one network

Enabling PassiveTest to report meters in A-CORD

Run make passivetest-acord

Enabling tapping of an interface

Ceilometer Dashboard shows the ports of VMs in the slices via a name with "tap" in it such as 'tapacb6a527-f8'. To tap that interface to provide PassiveTest metrics, perform the following:

 Go to the PassiveTest Service (Services->PassiveTest->service_passivetest)

 Enter in the name of the tap port in the form's "Tap ports:" field

```
 Click 'Save'
```

 Click on the Home->PassiveTest Breadcrumb

 Click on "Change" in the PASSIVETEST Tenants row

 Click on the 'mysite_passivetest_slice-X' instance

 Click 'Save'
 **Note: The last three steps were to trigger the synchronizer to add the tap port

 You should now see statistics in the Ceilometer Dashboard under service_passivetest XOS Service for each ip source/destination pair on that tap interface