Server hardware installation guide (first draft)
Change-Id: Ib4808e87f119229b7c6334e0ba6e69ee57f1230a
diff --git a/pronto_deployment_guide/enb_installation.rst b/pronto_deployment_guide/enb_installation.rst
index 393d6da..ed751c2 100644
--- a/pronto_deployment_guide/enb_installation.rst
+++ b/pronto_deployment_guide/enb_installation.rst
@@ -2,7 +2,8 @@
SPDX-FileCopyrightText: © 2020 Open Networking Foundation <support@opennetworking.org>
SPDX-License-Identifier: Apache-2.0
-================
+.. _enb-installation:
+
eNB Installation
================
@@ -59,8 +60,8 @@
With the below credentials, we can log in the UI:
-* ID: `sc_femto`
-* Password: `scHt3pp` (or `sc_femto`)
+* ID: ``sc_femto``
+* Password: ``scHt3pp`` (or ``sc_femto``)
After log-in, we can see the state page.
@@ -156,8 +157,13 @@
Then, power on the Sercomm eNB device and get rid of the LAN port cable.
.. note::
- Without the LAN port cable, we can access the Sercomm eNB admin UI through `https://192.168.251.5` URL, if the laptop/PC is connected with the same network via the fabric switch.
- For our convenience, we can add some forwarding rules into the `iptable` in the management node to get the Sercomm eNB admin UI outside. It is optional.
+ Without the LAN port cable, we can access the Sercomm eNB admin UI through
+ `https://192.168.251.5` URL, if the laptop/PC is connected to the same
+ network via the fabric switch.
+
+ For our convenience, we can optionally add forwarding rules into the
+ firewall configuration on the management node to access the Sercomm eNB
+ admin UI from outside the network.
Troubleshooting
===============