diff --git a/pronto_deployment_guide/bootstrapping.rst b/pronto_deployment_guide/bootstrapping.rst
index 147e1df..9053f7c 100644
--- a/pronto_deployment_guide/bootstrapping.rst
+++ b/pronto_deployment_guide/bootstrapping.rst
@@ -6,3 +6,95 @@
 Bootstrapping
 =============
 
+OS Installation - Switches
+==========================
+
+.. note::
+
+   This part will be done automatically once we have a DHCP and HTTP server set up in the infrastructure.
+   For now, we need to download and install the ONL image manually.
+
+Install ONL with Docker
+-----------------------
+First, enter **ONIE rescue mode**.
+
+Set up IP and route
+^^^^^^^^^^^^^^^^^^^
+.. code-block:: console
+
+   # ip addr add 10.92.1.81/24 dev eth0
+   # ip route add default via 10.92.1.1
+
+- `10.92.1.81/24` should be replaced by the actual IP and subnet of the ONL.
+- `10.92.1.1` should be replaced by the actual default gateway.
+
+Download and install ONL
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: console
+
+   # wget https://github.com/opennetworkinglab/OpenNetworkLinux/releases/download/v1.3.2/ONL-onf-ONLPv2_ONL-OS_2020-10-09.1741-f7428f2_AMD64_INSTALLED_INSTALLER
+   # sh ONL-onf-ONLPv2_ONL-OS_2020-10-09.1741-f7428f2_AMD64_INSTALLED_INSTALLER
+
+The switch will reboot automatically once the installer is done.
+
+.. note::
+
+   Alternatively, we can `scp` the ONL installer into ONIE manually.
+
+Setup BMC for remote console access
+-----------------------------------
+Log in to the BMC from ONL by
+
+.. code-block:: console
+
+   # ssh root@192.168.0.1 # pass: 0penBmc
+
+on `usb0` interface.
+
+Once you are in the BMC, run the following commands to setup IP and route (or offer a fixed IP with DHCP)
+
+.. code-block:: console
+
+   # ip addr add 10.92.1.85/24 dev eth0
+   # ip route add default via 10.92.1.1
+
+- `10.92.1.85/24` should be replaced by the actual IP and subnet of the BMC.
+  Note that it should be different from the ONL IP.
+- `10.92.1.1` should be replaced by the actual default gateway.
+
+BMC uses the same ethernet port as ONL management so you should give it an IP address in the same subnet.
+BMC address will preserve during ONL reboot, but won’t be preserved during power outage.
+
+To log in to ONL console from BMC, run
+
+.. code-block:: console
+
+   # /usr/local/bin/sol.sh
+
+If `sol.sh` is unresponsive, please try to restart the mainboard with
+
+.. code-block:: console
+
+   # wedge_power.sh restart
+
+Setup network and host name for ONL
+-----------------------------------
+
+.. code-block:: console
+
+   # hostnamectl set-hostname <host-name>
+
+   # vim.tiny /etc/hosts # update accordingly
+   # cat /etc/hosts # example
+   127.0.0.1 localhost
+   10.92.1.81 menlo-staging-spine-1
+
+   # vim.tiny /etc/network/interfaces.d/ma1 # update accordingly
+   # cat /etc/network/interfaces.d/ma1 # example
+   auto ma1
+   iface ma1 inet static
+   address 10.92.1.81
+   netmask 255.255.255.0
+   gateway 10.92.1.1
+   dns-nameservers 8.8.8.8