Reorganization pass on Aether Docs
Change-Id: I0653109d6fe8d340278580ff5c7758ca264b512e
diff --git a/edge_deployment/management_net_bootstrap.rst b/edge_deployment/management_net_bootstrap.rst
new file mode 100644
index 0000000..499e5b1
--- /dev/null
+++ b/edge_deployment/management_net_bootstrap.rst
@@ -0,0 +1,63 @@
+..
+ SPDX-FileCopyrightText: © 2020 Open Networking Foundation <support@opennetworking.org>
+ SPDX-License-Identifier: Apache-2.0
+
+Management Network Bootstrap
+============================
+
+The current Pronto deployment uses an HP/Aruba 2540 24G PoE+ 4SFP+ JL356A
+switch to run the management network and other VLAN's that are used internally.
+
+By default the switch will pull an IP address via DHCP and ``http://<switch IP>``
+will display a management webpage for the switch. You need to be able to access
+this webpage before you can update the configuration.
+
+Loading the Management Switch Configuration
+-------------------------------------------
+
+1. Obtain a copy of the Management switch configuration file (this ends in ``.pcc``).
+
+2. Open the switch web interface at ``http://<switch IP>``. You may be
+ prompted to login - the default credentials are both ``admin``:
+
+ .. image:: images/pswi-000.png
+ :alt: User Login for switch
+ :scale: 50%
+
+3. Go to the "Management" section at bottom left:
+
+ .. image:: images/pswi-001.png
+ :alt: Update upload
+ :scale: 50%
+
+ In the "Update" section at left, drag the configuration file into the upload
+ area, or click Browse and select it.
+
+4. In the "Select switch configuration file to update" section, select
+ "config1", so it overwrites the default configuration.
+
+5. In the "Select switch configuration file to update" section, select
+ "config1", so it overwrites the default configuration. Click "Update".
+ You'll be prompted to reboot the switch, which you can do with the power
+ symbol at top right. You may be prompted to select an image used to reboot -
+ the "Previously Selected" is the correct one to use:
+
+ .. image:: images/pswi-003.png
+ :alt: Switch Image Select
+ :scale: 30%
+
+6. Wait for the switch to reboot:
+
+ .. image:: images/pswi-004.png
+ :alt: Switch Reboot
+ :scale: 50%
+
+ The switch is now configured with the correct VLANs for Pronto Use. If you
+ go to Interfaces > VLANs should see a list of VLANs configured on the
+ switch:
+
+ .. image:: images/pswi-005.png
+ :alt: Mgmt VLANs
+ :scale: 50%
+
+