Bump to 1.6 dev release, restore 1.6 ROC docs
Change-Id: If1d14d0c6802623172a7f7a1957207dc72ab1a3d
diff --git a/developer/roc-api.rst b/developer/roc-api.rst
index 2708450..2ba3605 100644
--- a/developer/roc-api.rst
+++ b/developer/roc-api.rst
@@ -15,7 +15,7 @@
.. note:: Opening this in a browser will display a HTML view of the API (powered by *ReDoc*).
To access the raw YAML format use
- ``curl -H "Accept: application/yaml" http://localhost:8183/aether-roc-api/aether-3.0.0-openapi3.yaml``
+ ``curl -H "Accept: application/yaml" http://localhost:8183/aether-roc-api/aether-4.0.0-openapi3.yaml``
This YAML format can be imported in to various different tools e.g. |postman_link|
Background
@@ -33,10 +33,10 @@
Endpoints are named based on the type of object. Some examples:
-* `GET http://roc/aether/v3.0.0/connectivity-service-v3/enterprise/`. Get a list of enterprises.
-* `GET http://roc/aether/v3.0.0/connectivity-service-v3/enterprise/Starbucks`. Get the Starbucks enterprise.
-* `POST http://roc/aether/v3.0.0/connectivity-service-v3/enterprise`. Create a new enterprise.
-* `PATCH http://roc/aether/v3.0.0/connectivity-service-v3/site/Starbucks-NewYork`. Update the Starbucks New York site.
+* `GET http://roc/aether/v4.0.0/connectivity-service-v3/enterprise/`. Get a list of enterprises.
+* `GET http://roc/aether/v4.0.0/connectivity-service-v3/enterprise/Starbucks`. Get the Starbucks enterprise.
+* `POST http://roc/aether/v4.0.0/connectivity-service-v3/enterprise`. Create a new enterprise.
+* `PATCH http://roc/aether/v4.0.0/connectivity-service-v3/site/Starbucks-NewYork`. Update the Starbucks New York site.
This document is a high-level description of the objects that can be interacted with. For a
low-level description, see the specification (:ref:`developer/roc-api:Access` section above).
@@ -48,6 +48,10 @@
the scope of a particular type of object. For example, a site may be named `foo` and a device-group
may also be named `foo`, and the two names do not conflict because they are different object types.
+In addition to the `id`, most identifiable objects also include a `display-name`. The `display-name`
+may be changed at any time by the user without affecting behavior. In contrast, the `id` is immutable,
+and the only way to change an `id` is to delete the object and make a new one.
+
Some objects contain references to other objects. For example, many objects contain references to
the `Enterprise` object, which allows them to be associated with a particular enterprise. References
are constructed using the `id` field of the referenced object. It is an error to attempt to create
@@ -99,6 +103,24 @@
`CCCNNNEEESSSSSS` will construct IMSIs using a 3-digit MCC, 3-digit MNC, 3-digit ENT, and a
6-digit subscriber.
+* `small-cell` A list of 5G gNodeB or Access Point or Radios. Each small cell has the following:
+
+ * `small-cell-id`. Identifier for the small cell. Serves the same purpose as other `id` fields.
+ * `address`. Hostname of the small cell.
+ * `tac`. Type Allocation Code.
+ * `enable`. If set to `true`, the small cell is enabled. Otherwise, it is disabled.
+
+* `monitoring` Configuration of how the monitoring framework of the site can be connected:
+
+ * `edge-cluster-prometheus-url` the URL of the site's Edge cluster Prometheus service
+ * `edge-monitoring-prometheus-url` the URL of the site's Edge monitoring Prometheus service
+ * `edge-device` a list of monitoring devices that verify end-to-end connectivity
+
+ * `edge-device-id` the identifier of the edge monitoring device. Serves the same purpose as other `id` fields.
+ * `display-name` the user-friendly name for the edge device. It is recommended that the short hostname
+ be used for the `display-name` as a convention.
+ * `description` an optional description
+
Device-Group
~~~~~~~~~~~~
@@ -108,15 +130,25 @@
* `imsis`. A list of IMSI ranges. Each range has the following
fields:
- * `name`. Name of the range. Used as a key.
+ * `imsi-id`. Identifier of the IMSI. Serves the same purpose as other `id` fields.
* `imsi-range-from`. First subscriber in the range.
* `imsi-range-to`. Last subscriber in the range. Can be omitted if the range only contains one
- IMSI.
+ IMSI. It is recommended to not use this feature, and to represent all IMSIs as singletons. This
+ field will be deprecated in the future.
* `ip-domain`. Reference to an `IP-Domain` object that describes the IP and DNS settings for UEs
within this group.
* `site`. Reference to the site where this `Device-Group` may be used. Indirectly identifies the
`Enterprise` as `Site` contains a reference to `Enterprise`.
+* `device`. Per-device related QoS settings:
+
+ * `mbr`. The maximum bitrate in bits per second that the application will be limited to:
+
+ * `uplink` the `mbr` from device to slice
+ * `downlink` the `mbr` from slice to device
+
+ * `traffic-class`. The traffic class to be used for devices in this group.
+
Virtual Cellular Service
~~~~~~~~~~~~~~~~~~~~~~~~
@@ -126,17 +158,23 @@
* `device-group`. A list of `Device-Group` objects that can participate in this `VCS`. Each
entry in the list contains both the reference to the `Device-Group` as well as an `enable`
field which may be used to temporarily remove access to the group.
-* `application`. A list of `Application` objects that are either allowed or denied for this
+* `default-behavior`. May be set to either `ALLOW-ALL`, `DENY-ALL`, or `ALLOW-PUBLIC`. This is
+ the rule to use if no other rule in the filter matches. `ALLOW-PUBLIC` is a special alias
+ that denies all private networks and then allows everything else.
+* `filter`. A list of `Application` objects that are either allowed or denied for this
`VCS`. Each entry in the list contains both a reference to the `Application` as well as an
- `allow` field which can be set to `true` to allow the application or `false` to deny it.
-* `template`. Reference to the `Template` that was used to initialize this `VCS`.
+ `allow` field which can be set to `true` to allow the application or `false` to deny it. It
+ also has a `priority` field which can be used to order the applications when considering the
+ enforcing of their `allow` or `deny` conditions.
* `upf`. Reference to the User Plane Function (`UPF`) that should be used to process packets
for this `VCS`. It's permitted for multiple `VCS` to share a single `UPF`.
-* `ap`. Reference to an Access Point List (`AP-List`) that lists the access points for this
- `VCS`.
* `enterprise`. Reference to the `Enterprise` that owns this `VCS`.
-* `SST`, `SD`, `uplink`, `downlink`, `traffic-class`. Parameters that were initialized using the
- `template`. They are described in the section for the `Template` model.
+* `site`. Reference to the `Site` where this `VCS` is deployed. Aether maintains the restriction
+ that the `Site` of the `UPF` and `Device-Group` must match the `Site` of the `VCS`.
+* `SST`, `SD`. Slice identifiers. These are assigned by Aether Operations.
+* `slice.mbr.uplink`, `slice.mbr.downlink`. Slice-total Uplink and downlink maximum bit rates in bps.
+* `slice.mbr.uplink-burst-size`, `slice.mbr.downlink-burst-size`. Maximum burst sizes in bytes for
+ the maximum bit rates.
Application
~~~~~~~~~~~
@@ -144,39 +182,34 @@
`Application` specifies an application and the endpoints for the application. Applications are
the termination point for traffic from the UPF. Contains the following fields:
-* `endpoint`. A list of endpoints. Each has the following
- fields:
+* `address`. The DNS name or IP address of the endpoint.
+* `endpoint`. A list of endpoints. Each has the following fields:
- * `name`. Name of the endpoint. Used as a key.
- * `address`. The DNS name or IP address of the endpoint.
- * `port-start`. Starting port number.
- * `port-end`. Ending port number.
- * `protocol`. `TCP|UDP`, specifies the protocol for the endpoint.
+ * `name`. Name of the endpoint. Used as a key.
+ * `port-start`. Starting port number.
+ * `port-end`. Ending port number.
+ * `protocol`. `TCP|UDP`, specifies the protocol for the endpoint.
+ * `mbr`. The maximum bitrate in bits per second that UEs sending traffic to the application endpoint
+ will be limited to:
+
+ * `uplink` the `mbr` from device to application
+ * `downlink` the `mbr` from application to device
+
+ * `traffic-class`. Traffic class to be used when UEs send traffic to this Application endpoint.
+
* `enterprise`. Link to an `Enterprise` object that owns this application. May be left empty
to indicate a global application that may be used by multiple enterprises.
Supporting Aether Objects
-------------------------
-AP-List
-~~~~~~~
-
-`AP-List` specifies a list of access points (radios). It has the following fields:
-
-* `access-points`. A list of access points. Each access point has the following:
-
- * `address`. Hostname of the access point.
- * `tac`. Type Allocation Code.
- * `enable`. If set to `true`, the access point is enabled. Otherwise, it is disabled.
-
-* `enterprise`. The `Enterprise` that owns these access points.
-
Connectivity-Service
~~~~~~~~~~~~~~~~~~~~
`Connectivity-Service` specifies the URL of an SD-Core control plane.
* `core-5g-endpoint`. Endpoint of a `config4g` or `config5g` core.
+* `acc-prometheus-url`. Prometheus endpoint where metrics may be queried regarding this connectivity service.
IP-Domain
~~~~~~~~~
@@ -197,15 +230,22 @@
`Template` contains connectivity settings that are pre-configured by Aether Operations.
Templates are used to initialize `VCS` objects. `Template` has the following fields:
+* `default-behavior`. May be set to either `ALLOW-ALL`, `DENY-ALL`, or `ALLOW-PUBLIC`. This is
+ the rule to use if no other rule in the VCS's application filter matches. `ALLOW-PUBLIC` is
+ a special alias that denies all private networks and then allows everything else.
* `sst`, `sd`. Slice identifiers.
* `uplink`, `downlink`. Guaranteed uplink and downlink bandwidth.
* `traffic-class`. Link to a `Traffic-Class` object that describes the type of traffic.
+* `slice.mbr.uplink`, `slice.mbr.downlink`. Slice-total Uplink and downlink maximum bit rates in bps.
+* `slice.mbr.uplink-burst-size`, `slice.mbr.downlink-burst-size`. Maximum burst sizes in bytes for
+ the maximum bit rates.
Traffic-Class
~~~~~~~~~~~~~
Specifies the class of traffic. Contains the following:
+* `arp`. Allocation and Retention Priority.
* `qci`. QoS class identifier.
* `pelr`. Packet error loss rate.
* `pdb`. Packet delay budget.
@@ -213,11 +253,14 @@
UPF
~~~
-Specifies the UPF that should forward packets. Has the following fields:
+Specifies the UPF that should forward packets. A UPF can only be used by one VCS at a time.
+Has the following fields:
* `address`. Hostname or IP address of UPF.
* `port`. Port number of UPF.
* `enterprise`. Enterprise that owns this UPF.
+* `site`. The Site that this UPF is located at.
+* `config-endpoint` URL for configuring the UPF
.. |postman_link| raw:: html
diff --git a/developer/roc.rst b/developer/roc.rst
index 42ce0f8..69855d4 100644
--- a/developer/roc.rst
+++ b/developer/roc.rst
@@ -35,11 +35,11 @@
# install atomix
export ATOMIX_CONTROLLER_VERSION=0.6.8
helm -n kube-system install atomix-controller atomix/atomix-controller --version $ATOMIX_CONTROLLER_VERSION
- export ATOMIX_RAFT_VERSION=0.1.9
+ export ATOMIX_RAFT_VERSION=0.1.14
helm -n kube-system install atomix-raft-storage atomix/atomix-raft-storage --version $ATOMIX_RAFT_VERSION
# install the onos operator
- ONOS_OPERATOR_VERSION=0.4.10
+ ONOS_OPERATOR_VERSION=0.4.12
helm install -n kube-system onos-operator onosproject/onos-operator --version $ONOS_OPERATOR_VERSION
.. note:: The ROC is sensitive to the versions of Atomix and onos-operator installed. The values
@@ -57,10 +57,14 @@
- 0.6.7
- 0.1.8
- 0.4.8
- * - 1.3.0-
+ * - 1.3.0-1.3.10
- 0.6.8
- 0.1.9
- 0.4.10
+ * - 1.3.11-,1.4.0-
+ - 0.6.8
+ - 0.1.14
+ - 0.4.12
Verify that these services were installed properly.
You should see pods for *atomix-controller*, *atomix-raft-storage-controller*,
@@ -123,7 +127,7 @@
git clone https://github.com/onosproject/aether-roc-api.git
# execute the mega-patch (it will post via CURL to localhost:8181)
- bash ~/path/to/aether-roc-api/examples/MEGA_Patch.curl
+ bash ~/path/to/aether-roc-api/examples/MEGA_Patch_40.curl
You may wish to customize the mega patch.
@@ -133,10 +137,10 @@
You could configure it to push to a live aether-in-a-box core by doing something like this::
- sed -i 's^http://aether-roc-umbrella-sdcore-test-dummy/v1/config/5g^http://webui.omec.svc.cluster.local:9089/config^g' MEGA_Patch.curl
+ sed -i 's^http://aether-roc-umbrella-sdcore-test-dummy/v1/config/5g^http://webui.omec.svc.cluster.local:9089/config^g' MEGA_Patch_40.curl
#apply the patch
- ./MEGA_Patch.curl
+ ./MEGA_Patch_40.curl
(Note that if your Aether-in-a-Box was installed on a different machine that port-forwarding may be necessary)
@@ -163,10 +167,10 @@
# fix stuck finalizers in operator CRDs
- kubectl -n micro-onos patch entities connectivity-service-v2 --type json --patch='[ { "op": "remove", "path": "/metadata/finalizers" } ]'
-
kubectl -n micro-onos patch entities connectivity-service-v3 --type json --patch='[ { "op": "remove", "path": "/metadata/finalizers" } ]'
+ kubectl -n micro-onos patch entities connectivity-service-v4 --type json --patch='[ { "op": "remove", "path": "/metadata/finalizers" } ]'
+
kubectl -n micro-onos patch kind aether --type json --patch='[ { "op": "remove", "path": "/metadata/finalizers" } ]'
Useful port forwards