..
   SPDX-FileCopyrightText: © 2020 Open Networking Foundation <support@opennetworking.org>
   SPDX-License-Identifier: Apache-2.0

Runtime Deployment
==================

This section describes how to install and configure Aether Edge Runtime including Kubernetes
and system level applications listed below.

* sealed-secrets
* rancher-monitoring
* fluent-bit
* opendistro-es
* hostpath-provisioner
* edge-maintenance-agent
* sriov-device-plugin
* uedns

For this, we will be using GitOps based CI/CD systems and what you will need to do is
create patches in Aether GitOps repositories, **aether-pod-configs** and **aether-app-configs**,
to provide cluster and application configurations to the CI/CD systems.

.. attention::

   If you skipped VPN bootstap step and didn't add the deployment jobs for the new edge,
   go to :ref:`Add deployment jobs <add_deployment_jobs>` step and finish it first
   before proceeding.

K8S cluster deployment
----------------------

Download ``aether-pod-configs`` repository if you don't have it already in
your development machine.

.. code-block:: shell

   $ cd $WORKDIR
   $ git clone "ssh://[username]@gerrit.opencord.org:29418/aether-pod-configs"

.. attention::

   If you skipped VPN bootstap step and didn't update global resource maps for the new edge,
   go to :ref:`Update global resource maps <update_global_resource>` step and
   finish ``cluster_map.tfvars`` and ``user_map.tfvars`` update first before proceeding.

Run the following commands to automatically generate Terraform configurations needed to
create a new cluster in `Rancher <https://rancher.aetherproject.org>`_ and add the servers
and switches to the cluster.

.. code-block:: shell

   # Create ace_cofig.yaml file if you haven't yet
   $ cd $WORKDIR/aether-pod-configs/tools
   $ cp ace_config.yaml.example ace_config.yaml
   $ vi ace_config.yaml
   # Set all values

   $ make runtime
   Created ../production/ace-test/provider.tf
   Created ../production/ace-test/cluster.tf
   Created ../production/ace-test/rke-bare-metal.tf
   Created ../production/ace-test/addon-manifests.yml.tpl
   Created ../production/ace-test/project.tf
   Created ../production/ace-test/member.tf
   Created ../production/ace-test/backend.tf
   Created ../production/ace-test/cluster_val.tfvars

.. attention::

  If the cluster has an even number of compute nodes, edit **cluster_val.tfvars**
  file so that only the odd number of nodes have **etcd** and **controlplane**
  roles.

Create a review request.

.. code-block:: shell

   $ cd $WORKDIR/aether-pod-configs
   $ git add .
   $ git commit -m "Add test ACE runtime configs"
   $ git review

Once your review request is accepted and merged, Aether CI/CD system starts to deploy K8S.
Wait until the cluster status changes to **Active** in `Rancher <https://rancher.aetherproject.org>`_.
It normally takes 10 - 15 minutes depending on the speed of the container images
download at the edge.

It is also a good idea to check the system pod status after successful K8S deployment.
To do so, login to Rancher, open the cluster that you just deployed in the **Global** view, and click
**Launch kubectl** button. You can interact with the cluster using the window that opens.
Run the following commands and make sure all pods are ``Running``.

.. code-block:: shell

  # Run kubectl commands inside here
  # e.g. kubectl get all
  > kubectl get po -A

System Application Deployment
-----------------------------

For the system application deployment, we will be using Rancher's built-in GitOps tool, **Fleet**.
Fleet uses a git repository as a single source of truth to manage applications in the clusters.
For Aether, **aether-app-configs** is the repository where all Aether applications
are defined.

Most of the Aether system applications do not require cluster specific configurations,
except **rancher-monitoring** and **uedns**.
For these applications, you will have to manually create custom configurations and
commit them to aether-app-configs.

First, download ``aether-app-configs`` if you don't have it already in your development machine.

.. code-block:: shell

   $ cd $WORKDIR
   $ git clone "ssh://[username]@gerrit.opencord.org:29418/aether-app-configs"

Configure rancher-monitoring
############################

Open ``fleet.yaml`` under ``infrastructure/rancher-monitoring``, add a custom target
with the new cluster name as a selector, and provide cluster specific Helm values and
kustomize overlay directory path like below.

.. code-block:: yaml

   $ cd $WORKDIR/aether-app-configs/infrastructure/rancher-monitoring
   $ vi fleet.yaml
   # add following block at the end
   - name: ace-test
     clusterSelector:
       matchLabels:
         management.cattle.io/cluster-display-name: ace-test
     helm:
       values:
         prometheus:
           prometheusSpec:
             additionalAlertRelabelConfigs:
               - source_labels: [__address__]
                 target_label: cluster
                 replacement: ace-test
     kustomize:
       dir: overlays/prd-ace

.. note::

   Above step will not be required in Rancher v2.6 as it supports using cluster labels as helm values in a list.

Configure ue-dns
################

For UE-DNS, it is required to create a Helm values file for the new cluster.
You'll need cluster domain and kube-dns ClusterIP. Both can be found in
``aether-pod-configs/production/cluster_map.tfvars``.
Be sure to replace ``[ ]`` in the example configuration below to the actual cluster values.

.. code-block:: yaml

   $ cd $WORKDIR/aether-app-configs/infrastructure/coredns
   $ mkdir overlays/prd-ace-test
   $ vi overlays/prd-ace-test/values.yaml
   # SPDX-FileCopyrightText: 2021-present Open Networking Foundation <info@opennetworking.org>

   serviceType: ClusterIP
   service:
     clusterIP: [next address of the kube-dns ip]
   servers:
     - zones:
         - zone: .
       port: 53
       plugins:
         - name: errors
         - name: health
           configBlock: |-
             lameduck 5s
         - name: ready
         - name: prometheus
           parameters: 0.0.0.0:9153
         - name: forward
           parameters: . /etc/resolv.conf
         - name: cache
           parameters: 30
         - name: loop
         - name: reload
         - name: loadbalance
     - zones:
         - zone: aetherproject.net
       port: 53
       plugins:
         - name: errors
         - name: rewrite continue
           configBlock: |-
             name regex (.*)\.aetherproject.net {1}.svc.[cluster domain]
             answer name (.*)\.svc\.[cluster domain] {1}.aetherproject.net
         - name: forward
           parameters: . [kube-dns ip]
           configBlock: |-
             except kube-system.svc.[cluster domain] aether-sdcore.svc.[cluster domain] tost.svc.[cluster domain]
         - name: cache
           parameters: 30


Next, update ``fleet.yaml`` under ``infrastructure/coredns`` so that Fleet can use the custom configuration
you just created when deploying UE-DNS to the cluster.

.. code-block:: yaml

   $ cd $WORKDIR/aether-app-configs/infrastructure/coredns
   $ vi fleet.yaml
   # add following block at the end
   - name: prd-ace-test
     clusterSelector:
       matchLabels:
         management.cattle.io/cluster-display-name: ace-test
     helm:
       valuesFiles:
         - overlays/prd-ace-test/values.yaml


Submit your changes.

.. code-block:: shell

   $ cd $WORKDIR/aether-app-configs
   $ git status
   $ git add .
   $ git commit -m "Add test ACE application configs"
   $ git review


Assign Fleet workspace
######################

By default, all new clusters are assgiend to a default Fleet workspace called **fleet-default**.
To make a cluster part of Aether and have the applications defined in aether-app-configs deployed,
you must assign the cluster to either **aether-stable** or **aether-alpha** workspace.
For clusters expecting minimal downtime, assign to **aether-stable**.
For clusters for development or previewing upcoming release, assign to **aether-alpha**.

Workspace assignment can be done from Fleet dashboard.
To access Fleet dashboard, log in to `Rancher <https://rancher.aetherproject.org>`_ as
``admin`` or ``onfadmin`` user, go to the **Cluster Explorer**,
and click **Cluster Explorer > Continuous Delivery** in the top left dropdown menu.
Now, perform the following steps to assign the new cluster to one of the Aether workspaces.

.. image:: images/fleet-move-workspace.png

1) Click the second dropdown menu from the left at the top and switch the current workspace
   to **fleet-default**.
2) Click **Clusters** on the left menu.
3) Select the cluster.
4) Click **Assign to...** button and choose **aether-stable** or **aether-alpha**
   in from the popup menu.

To verify, switch the current workspace to the workspace the cluster is assigned to,
click **Clusters** in the left menu, and check if the cluster exists.
Wait for the system application deployment to complete and the cluster state
to become **Active**.

.. attention::

   Ignore BESS UPF failure at this point if BESS UPF is enabled.