diff --git a/edge_deployment/fabric_switch_bootstrap.rst b/edge_deployment/fabric_switch_bootstrap.rst
index bfac6b6..aa9827d 100644
--- a/edge_deployment/fabric_switch_bootstrap.rst
+++ b/edge_deployment/fabric_switch_bootstrap.rst
@@ -53,7 +53,7 @@
 .. note::
   If `sol.sh` is unresponsive, please try to restart the mainboard with::
 
-    root@onl:~# wedge_power.sh restart
+    root@onl:~# wedge_power.sh reset
 
 
 Change the boot mode to rescue mode with the command ``onl-onie-boot-mode
diff --git a/edge_deployment/site_planning.rst b/edge_deployment/site_planning.rst
index 4af68f7..7973eda 100644
--- a/edge_deployment/site_planning.rst
+++ b/edge_deployment/site_planning.rst
@@ -8,28 +8,35 @@
 Site Design in Netbox
 ---------------------
 
+The Aether project uses Netbox as source of truth, and the automation script uses
+it's API to create input files for Ansible Playbooks which are used to configure
+each site.
+
 Once the hardware has been ordered, the installation can be planned.  The
 following information needs to be added to `NetBox
 <https://netbox.readthedocs.io/en/stable>`_ to describe each edge site:
 
-1. Add a Site for the edge (if one doesn't already exist), which has the
-   physical location and contact information for the edge.
+.. note::
+   The **bold** words represent the models in Netbox.
+
+1. Add a **Site** for the edge (if one doesn't already exist), which has the
+   physical location and contact information for the Aether Edge.
 
 2. Add equipment Racks to the Site (if they don't already exist).
 
-3. Add a Tenant for the edge (who owns/manages it), assigned to the ``Pronto``
+3. Add a **Tenant** for the edge (who owns/manages it), assigned to the ``Pronto``
    or ``Aether`` Tenant Group.
 
-4. Add a VRF (Routing Table) for the edge site. This is usually just the name
+4. Add a **VRF** (Routing Table) for the edge site. This is usually just the name
    of the site.  Make sure that ``Enforce unique space`` is checked, so that IP
    addresses within the VRF are forced to be unique, and that the Tenant Group
    and Tenant are set.
 
-5. Add a VLAN Group to the edge site, which groups the site's VLANs and
+5. Add a **VLAN Group** to the edge site, which groups the site's VLANs and
    requires that they have a unique VLAN number.
 
-6. Add VLANs for the edge site.  These should be assigned a VLAN Group, the
-   Site, and Tenant.
+6. Add **VLANs** for the edge site.  These VLAN objects should be assigned a VLAN
+   Group, a Site, and a Tenant.
 
    There can be multiple of the same VLAN in NetBox (VLANs are layer 2, and
    local to the site), but not within the VLAN group.
@@ -42,53 +49,63 @@
      * FAB 801
 
    If you have multiple deployments at a site using the same management server,
-   add additional VLANs incremented by 10 for the MGMT/FAB - for example:
+   add additional VLANs incremented by 10 for the MGMT/FAB - for example, you
+   can create the VLANs for development server as follows:
 
      * DEVMGMT 810
      * DEVFAB 801
 
-7. Add IP Prefixes for the site. This should have the Tenant and VRF assigned.
+7. Add IP **Prefixes** for the site. This should have the Tenant and VRF assigned.
 
-   All edge IP prefixes fit into a ``/22`` sized block.
+   All IP prefixes of Aether Edge will fit into a ``/22`` sized block.
 
-   The description of the Prefix contains the DNS suffix for all Devices that
-   have IP addresses within this Prefix. The full DNS names are generated by
-   combining the first ``<devname>`` component of the Device names with this
-   suffix.
+   The Prefix description field is used to create DNS names for IP addresses in the Prefix.
+   The DNS A records for each IP address start with the name of the Device, and end with
+   the Prefix description.
 
-   An examples using the ``10.0.0.0/22`` block. There are 4 edge
-   prefixes, with the following purposes:
+   For example, if we have a management server named ``mgmtserver`` in **Prefix**
+   ``prod1.menlo.aetherproject.net``, and the management server's DNS name will be
+   ``mgmtserver.prod1.menlo.aetherproject.net``.
 
-     * ``10.0.0.0/25``
+   Here is an example using the ``10.0.0.0/22`` block. Let's name our deployment
+   as "prod1", and name our site as "menlo". Then we define 4 **Prefixes**
+   with different purposes.
+
+.. note::
+   NOTE: You should replace the **prod1** and **menlo** to your deployment name and
+   site name.
+..
+
+     * ADMIN Prefix - ``10.0.0.0/25`` (for Lights-out management)
 
         * Has the Server BMC/LOM and Management Switch
-        * Assign the ADMIN 1 VLAN
-        * Set the description to ``admin.<deployment>.<site>.aetherproject.net`` (or
+        * Assign with the ADMIN 1 VLAN
+        * Set the description to ``admin.prod1.menlo.aetherproject.net`` (or
           ``prontoproject.net``).
 
-     * ``10.0.0.128/25``
+     * MGMT Prefix -  ``10.0.0.128/25`` (for infrastructure control plane)
 
         * Has the Server Management plane, Fabric Switch Management/BMC
-        * Assign MGMT 800 VLAN
-        * Set the description to ``<deployment>.<site>.aetherproject.net`` (or
+        * Assign with MGMT 800 VLAN
+        * Set the description to ``prod1.menlo.aetherproject.net`` (or
           ``prontoproject.net``).
 
-     * ``10.0.1.0/25``
+     * FABRIC1 Prefix - ``10.0.1.0/25``
 
-        * IP addresses of the qsfp0 port of the Compute Nodes to Fabric switches, devices
-          connected to the Fabric like the eNB
+        * Compute Nodes' qsfp0 port which connects to Fabric switches,
+          and other devices (eNB, ...) connect to the Fabric switches.
+        * Assign with FAB 801 VLAN
+        * Set the description to ``fab1.prod1.menlo.aetherproject.net`` (or
+          ``prontoproject.net``).
+
+     * FABRIC2 Prefix - ``10.0.1.128/25``
+
+        * Compute Nodes' qsfp1 port which connects to Fabric switches
         * Assign FAB 801 VLAN
-        * Set the description to ``fab1.<deployment>.<site>.aetherproject.net`` (or
+        * Set the description to ``fab2.prod1.menlo.aetherproject.net`` (or
           ``prontoproject.net``).
 
-     * ``10.0.1.128/25``
-
-        * IP addresses of the qsfp1 port of the Compute Nodes to fabric switches
-        * Assign FAB 801 VLAN
-        * Set the description to ``fab2.<deployment>.<site>.aetherproject.net`` (or
-          ``prontoproject.net``).
-
-   There also needs to be a parent range of the two fabric ranges added:
+   And we will have an additional parent prefix includes 2 FABRIC Prefix.
 
      * ``10.0.1.0/24``
 
@@ -108,7 +125,7 @@
 
         * Kubernetes Cluster IP's
 
-8. Add Devices to the site, for each piece of equipment. These are named with a
+8. Add **Devices** to the site, for each piece of equipment. These are named with a
    scheme similar to the DNS names used for the pod, given in this format::
 
      <devname>.<deployment>.<site>
@@ -135,7 +152,7 @@
    See `Rackmount of Equipment`_ below for guidance on how equipment should be
    mounted in the Rack.
 
-9. Add Services to the management server:
+9. Add **Service** to the management server:
 
     * name: ``dns``
       protocol: UDP
@@ -150,29 +167,29 @@
 
 10. Set the MAC address for the physical interfaces on the device.
 
-   You may also need to add physical network interfaces if  aren't already
+   You may also need to add physical network interfaces if they aren't already
    created by the Device Type.  An example would be if additional add-in
    network cards were installed.
 
-11. Add any virtual interfaces to the Devices. When creating a virtual
-    interface, it should have it's ``label`` field set to the physical network
-    interface that it is assigned
+11. Add any virtual interfaces to the **Devices**. When creating a virtual
+    interface, it should have it's ``label`` field set to the name of the
+    physical interface that it is assigned
 
-    These are needed are two cases for the Pronto deployment:
+    These are needed for two cases of the Pronto deployment:
 
      1. On the Management Server, there should bet (at least) two VLAN
         interfaces created attached to the ``eno2`` network port, which
         are used to provide connectivity to the management plane and fabric.
-        These should be named ``<name of vlan><vlan ID>``, so the MGMT 800 VLAN
-        would become a virtual interface named ``mgmt800``, with the label
-        ``eno2``.
+        These interfaces should be named ``<name of vlan><vlan ID>``, so the
+        MGMT 800 VLAN would become a virtual interface named ``mgmt800``, with
+        the label ``eno2``.
 
      2. On the Fabric switches, the ``eth0`` port is shared between the OpenBMC
         interface and the ONIE/ONL installation.  Add a ``bmc`` virtual
-        interface with a label of ``eth0`` on each fabric switch, and check the
-        ``OOB Management`` checkbox.
+        interface with a label of ``eth0`` on each fabric switch, and have the
+        ``OOB Management`` checkbox checked.
 
-12. Create IP addresses for the physical and virtual interfaces.  These should
+12. Create **IP addresses** for the physical and virtual interfaces.  These should
     have the Tenant and VRF set.
 
     The Management Server should always have the first IP address in each
@@ -210,17 +227,18 @@
 
           * ``eth0`` or other primary interface - 10.0.1.4/25 (next of FAB)
 
-13. Add DHCP ranges to the IP Prefixes for IP's that aren't reserved. These are
-    done like any other IP Address, but with the ``Status`` field is set to
-    ``DHCP``, and they'll consume the entire range of IP addresses given in the
-    CIDR mask.
+13. Add **IP address** to the **Prefix** to represent reserved DHCP ranges.
+    We use a single IP address which ``Status`` is set to ``DHCP``  to stand
+    for the DHCP range, the DHCP server will consume the entire range of IP
+    address in the CIDR mask (includes first and last IP addresses).
 
-    For example ``10.0.0.32/27`` as a DHCP block would take up 1/4 of the ADMIN
-    prefix.
+    For example, IP ``10.0.0.32/27`` with ``DHCP`` status in Prefix
+    ``10.0.0.0/25``, the IP will be a DHCP block, and allocate IP address from
+    ``10.0.0.32`` to ``10.0.0.63``.
 
-14. Add router IP reservations to the IP Prefix for both Fabric prefixes. These
-    are IP addresses used by ONOS to route traffic to the other leaf, and have
-    the following attributes:
+14. Add **IP address** to the **Prefix** to represent route IP reservations for
+    both Fabric prefixes.  These are IP addresses used by ONOS to route traffic
+    to the other leaf, and have the following attributes:
 
     - Have the last usable address in range (in the ``/25`` fabric examples
       above, these would be ``10.0.1.126/25`` and ``10.0.1.254/25``)
diff --git a/edge_deployment/vpn_bootstrap.rst b/edge_deployment/vpn_bootstrap.rst
index 7c57367..11aa824 100644
--- a/edge_deployment/vpn_bootstrap.rst
+++ b/edge_deployment/vpn_bootstrap.rst
@@ -227,8 +227,9 @@
 
    $ cd $WORKDIR/aether-pod-configs/tools
    $ cp ace_config.yaml.example ace_config.yaml
+
+   # Set all values in ace_config.yaml
    $ vi ace_config.yaml
-   # Set all values
 
    $ make vpn
    Created ../production/ace-test