diff --git a/README.md b/README.md
deleted file mode 100644
index fa6200e..0000000
--- a/README.md
+++ /dev/null
@@ -1,75 +0,0 @@
-# AT&T Workflow Driver 
-
-This service implements the ONU and Subscriber management logic required by AT&T.
-It's also a good start if you need to implement a different logic to suit your use-case.
-
-> NOTE: This service depends on RCORDSubscriber and ONUDevice so make sure that the `rcord-synchronizer` and `volt-synchronzier` are running
-
-## How to install this service
-
-Make sure you have `xos-core`, `rcord-lite` and `kafka` running.
-
-To install from master:
-
-```bash
-helm install -n att-workflow xos-services/att-workflow-driver/
-```
-
-To install from the local `docker` daemon in minikube:
-
-```bash
-helm install -n att-workflow xos-services/att-workflow-driver/ -f examples/image-tag-candidate.yaml -f examples/imagePullPolicy-IfNotPresent.yaml
-```
-
-## Service Instances State Machine
-
-| Topic                   | Event                            | Actions                                                   | ONU State    | Subscriber State     | Message                                                  |
-|-------------------------|----------------------------------|-----------------------------------------------------------|--------------|----------------------|----------------------------------------------------------|
-| `onu.events`            | `status: activated`              | Validate against whitelist (successful)                   | enabled      | awaiting-auth        | ONU has been validated                                   |
-| `onu.events`            | `status: activated`              | Validate against whitelist (failed, missing)              | disabled     | awaiting-auth        | ONU not found in whitelist                               |
-| `onu.events`            | `status: activated`              | Validate against whitelist (failed, location)             | disabled     | awaiting-auth        | ONU activated in wrong location                           |
-| `onu.events`            | `status: disabled`               | Mark ONU as disabled and revoke subscriber authentication | disabled     | awaiting-auth        | ONU has been disabled, revoked subscriber authentication |
-| `authentication.events` | `authenticationState: STARTED`   | Update subscriber status                                  | enabled      | awaiting-auth        | Authentication started                                   |
-| `authentication.events` | `authenticationState: REQUESTED` | Update subscriber status                                  | enabled      | awaiting-auth        | Authentication requested                                 |
-| `authentication.events` | `authenticationState: APPROVED`  | Update subscriber status                                  | enabled      | enabled              | Authentication succeded                                  |
-| `authentication.events` | `authenticationState: DENIED`    | Update subscriber status                                  | enabled      | auth-failed          | Authentication denied                                    |
-| `dhcp.events`           | --                               | Update subscriber ip and mac address                      | enabled      | enabled              | DHCP information added                                   |
-
-## Events format
-
-This events are generated by various applications running on top of ONOS and published on a Kafka bus.
-Here is the structure of the events and their topics.
-
-### onu.events
-
-```json
-{
-  "timestamp": "2018-09-11T01:00:49.506Z",
-  "status": "activated", // or disabled
-  "serial_number": "ALPHe3d1cfde", // ONU serial number
-  "uni_port_id": 16, // uni port 
-  "of_dpid": "of:000000000a5a0072" // OLT OpenFlow Id
-}
-```
-
-### authentication.events
-
-```json
-{
-  "timestamp": "2018-09-11T00:41:47.483Z",
-  "deviceId": "of:000000000a5a0072", // OLT OpenFlow Id
-  "portNumber": "16", // uni port
-  "authenticationState": "STARTED" // REQUESTED, APPROVED, DENIED
-}
-```
-
-### dhcp.events
-
-```json
-{
-  "deviceId" : "of:000000000a5a0072",
-  "portNumber" : "16",
-  "macAddress" : "90:e2:ba:82:fa:81",
-  "ipAddress" : "10.11.1.1"
-}
-```
\ No newline at end of file
diff --git a/VERSION b/VERSION
index 61f8b08..7fdc1c8 100644
--- a/VERSION
+++ b/VERSION
@@ -1,2 +1,2 @@
-1.0.12
+1.0.13
 
diff --git a/docs/README.md b/docs/README.md
index 214a04f..030951b 100644
--- a/docs/README.md
+++ b/docs/README.md
@@ -1,31 +1,31 @@
-# AT&T Workflow Driver 
+# AT&T Workflow Driver Service
 
-This service is intended to be an example implementation of a service that integrates XOS with an external OSS system.
-As the name suggests this service will be very welcoming and validate any ONU that is connected to the system.
+This service implements the ONU and Subscriber management logic required by AT&T.
+It's also a good start if you need to implement different logic to suit your use case.
 
-Peace and Love
+> NOTE: This service depends on models contained in the R-CORD and OLT Services, so make sure that the `rcord-synchronizer` and `volt-synchronzier` are running
 
-> NOTE: This service depends on RCORDSubscriber and ONUDevice so make sure that the `rcord-synchronizer` and `volt-synchronzier` are running
+## Models
 
-## How to install this service
+This service is composed of the following models:
 
-Make sure you have `xos-core`, `rcord-lite` and `kafka` running.
+- `AttWorkflowDriverServiceInstance`. This model holds various state associated with the state machine for validating a subscriber's ONU.
+    - `serial_number`. Serial number of ONU.
+    - `authentication_state`. [`AWAITING` | `STARTED` | `REQUESTED` | `APPROVED` | `DENIED`]. Current authentication state.
+    - `of_dpid`.
+    - `uni_port_id`.
+    - `onu_state`. [`AWAITING` | `ENABLED` | `DISABLED`]. State of the ONU.
+    - `status_message`.
+    - `dhcp_state`. [`AWAITING` | `DHCPDISCOVER` | `DHCPACK` | `DHCPREQUEST`]. Current DHCP state.
+    - `ip_address`. Subscriber ip address.
+    - `mac_address`. Subscriber mac address.
+- `AttWorkflowDriverWhiteListEntry`. This model holds a whitelist authorizing an ONU with a specific serial number to be connected to a specific PON Port on a specific OLT.
+    - `owner`. Relation to the AttWorkflowDriverService that owns this whitelist entry.
+    - `serial_number`. Serial number of ONU.
+    - `pon_port_id`. Pon port identifier.
+    - `device_id`. OLT device identifier.
 
-To install from master:
-
-```bash
-helm install -n att-workflow xos-services/att-workflow-driver/
-```
-
-To install from the local `docker` daemon in minikube:
-
-```bash
-helm install -n att-workflow xos-services/att-workflow-driver/ -f examples/image-tag-candidate.yaml -f examples/imagePullPolicy-IfNotPresent.yaml
-```
-
-## Configure this service
-
-You can use this TOSCA to add entries to the ONU whitelist:
+## Example Tosca - Create a whitelist entry
 
 ```yaml
 tosca_definitions_version: tosca_simple_yaml_1_0
@@ -53,3 +53,84 @@
             node: service#att
             relationship: tosca.relationships.BelongsToOne
 ```
+
+## Integration with other Services
+
+This service integrates closely with the `R-CORD` and `vOLT` services, directly manipulating models (`RCORDSubscriber`, `ONUDevice`) in those services.
+
+## Synchronizer Workflows
+
+This synchronizer implements only event_steps and model_policies. It's job is to listen for events and execute a state machine associated with those events. Service Instances are created automatically when ONU events are received. As the state machine changes various states for authentication, etc., those changes will be propagated to the appropriate objects in the `R-CORD` and `vOLT` services.
+
+The state machine is described below.
+
+### Service Instances State Machine
+
+| Topic                   | Event                            | Actions                                                   | ONU State    | Subscriber State     | Message                                                  |
+|-------------------------|----------------------------------|-----------------------------------------------------------|--------------|----------------------|----------------------------------------------------------|
+| `onu.events`            | `status: activated`              | Validate against whitelist (successful)                   | enabled      | awaiting-auth        | ONU has been validated                                   |
+| `onu.events`            | `status: activated`              | Validate against whitelist (failed, missing)              | disabled     | awaiting-auth        | ONU not found in whitelist                               |
+| `onu.events`            | `status: activated`              | Validate against whitelist (failed, location)             | disabled     | awaiting-auth        | ONU activated in wrong location                           |
+| `onu.events`            | `status: disabled`               | Mark ONU as disabled and revoke subscriber authentication | disabled     | awaiting-auth        | ONU has been disabled, revoked subscriber authentication |
+| `authentication.events` | `authenticationState: STARTED`   | Update subscriber status                                  | enabled      | awaiting-auth        | Authentication started                                   |
+| `authentication.events` | `authenticationState: REQUESTED` | Update subscriber status                                  | enabled      | awaiting-auth        | Authentication requested                                 |
+| `authentication.events` | `authenticationState: APPROVED`  | Update subscriber status                                  | enabled      | enabled              | Authentication succeded                                  |
+| `authentication.events` | `authenticationState: DENIED`    | Update subscriber status                                  | enabled      | auth-failed          | Authentication denied                                    |
+| `dhcp.events`           | --                               | Update subscriber ip and mac address                      | enabled      | enabled              | DHCP information added
+
+### Model Policy: AttWorkflowDriverServiceInstancePolicy
+
+This model policy is responsible for reacting to state changes that are caused by various event steps, implementing the state machine described above.
+
+### Event Step: SubscriberAuthEventStep
+
+Listens on `authentication.events` and updates the `authentication_state` fields of `AttWorkflowDriverServiceInstance`.
+
+### Event Step: SubscriberDhcpEventStep
+
+Listens on `dhcp.events` and updates the `dhcp_state`, `ip_address`, and `mac_address` fields of `AttWorkflowDriverServiceInstance`.
+
+### Event Step: ONUEventStep
+
+Listens on `onu.events` and updates the `onu_state` of `AttWorkflowDriverServiceInstance`. Also resets `authentication_state` when an ONU is disabled. Automatically creates `AttWorkflowDriverServiceInstance` as necessary.
+
+
+## Events format
+
+This events are generated by various applications running on top of ONOS and published on a Kafka bus.
+Here is the structure of the events and their topics.
+
+### onu.events
+
+```json
+{
+  "timestamp": "2018-09-11T01:00:49.506Z",
+  "status": "activated", // or disabled
+  "serial_number": "ALPHe3d1cfde", // ONU serial number
+  "uni_port_id": 16, // uni port
+  "of_dpid": "of:000000000a5a0072" // OLT OpenFlow Id
+}
+```
+
+### authentication.events
+
+```json
+{
+  "timestamp": "2018-09-11T00:41:47.483Z",
+  "deviceId": "of:000000000a5a0072", // OLT OpenFlow Id
+  "portNumber": "16", // uni port
+  "authenticationState": "STARTED" // REQUESTED, APPROVED, DENIED
+}
+```
+
+### dhcp.events
+
+```json
+{
+  "deviceId" : "of:000000000a5a0072",
+  "portNumber" : "16",
+  "macAddress" : "90:e2:ba:82:fa:81",
+  "ipAddress" : "10.11.1.1"
+}
+```
+