[VOL-4397] Updating omci-lib-go to 2.1.2
Change-Id: I702e34440c96ae65d3cdf3f5f63a08b977ac1bc0
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/dot1agmaintenancedomain.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/dot1agmaintenancedomain.go
new file mode 100644
index 0000000..5f191a5
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/dot1agmaintenancedomain.go
@@ -0,0 +1,151 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// Dot1AgMaintenanceDomainClassID is the 16-bit ID for the OMCI
+// Managed entity Dot1ag maintenance domain
+const Dot1AgMaintenanceDomainClassID = ClassID(299) // 0x012b
+
+var dot1agmaintenancedomainBME *ManagedEntityDefinition
+
+// Dot1AgMaintenanceDomain (Class ID: #299 / 0x012b)
+// In [IEEE 802.1ag], a maintenance domain (MD) is a context within which configuration fault
+// management (CFM) connectivity verification can occur. Individual services (maintenance
+// associations, MAs) exist within an MD. An MD is created and deleted by the OLT. The MD ME is
+// specified by [IEEE 802.1ag] in such a way that the same provisioning can be used for all
+// associated systems in a network; the OMCI definition accordingly avoids ONU-specific information
+// such as pointers.
+//
+// Relationships
+// Several MDs may be associated with a given bridge, at various MD levels, and a given MD may be
+// associated with any number of bridges.
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies an instance of this ME. The values 0 and 0xFFFF are reserved.
+// (R, setbycreate) (mandatory) (2-bytes)
+//
+// Md Level
+// This attribute ranges from 0..7 and specifies the maintenance level of this MD. Higher numbers
+// have wider geographic scope. (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// Md Name Format
+// This attribute specifies one of several possible formats for the MD name attribute. (R,-W,
+// setbycreate) (mandatory) (1-byte)
+//
+// MD Name 1
+// These two attributes may be regarded as a 50-byte octet string whose value is the left-justified
+// maintenance domain name. The MD name may or may not be a printable character string, so an octet
+// string is the appropriate representation. If the MD name format specifies a DNS-like name or a
+// character string, the string is null-terminated; otherwise, its length is determined by the MD
+// name format. If the MD has no name (MD name format-=-0), this attribute is undefined. Note that
+// binary comparisons of the MD name are made in other CFM state machines, so blanks, alphabetic
+// case, etc., are significant. Also, note that the MD name and the MA name must be packed (with
+// additional bytes) into 48-byte CFM message headers. (R,-W) (mandatory if MD name format is not
+// 1) (25-bytes * 2 attributes)
+//
+// MD Name 2
+// These two attributes may be regarded as a 50-byte octet string whose value is the left-justified
+// maintenance domain name. The MD name may or may not be a printable character string, so an octet
+// string is the appropriate representation. If the MD name format specifies a DNS-like name or a
+// character string, the string is null-terminated; otherwise, its length is determined by the MD
+// name format. If the MD has no name (MD name format-=-0), this attribute is undefined. Note that
+// binary comparisons of the MD name are made in other CFM state machines, so blanks, alphabetic
+// case, etc., are significant. Also, note that the MD name and the MA name must be packed (with
+// additional bytes) into 48-byte CFM message headers. (R,-W) (mandatory if MD name format is not
+// 1) (25-bytes * 2 attributes)
+//
+// Maintenance Domain Intermediate Point Half Function Mhf Creation
+// Maintenance domain intermediate point half function (MHF) creation: This attribute determines
+// whether an associated bridge creates an MHF for this MD, under circumstances defined in
+// clause-22.2.3 of [IEEE 802.1ag]. This attribute is an enumeration with the following values.
+//
+// 1 None
+//
+// 2 Default (IEEE 802.1ag term). The bridge can create MHFs on an associated VID on any port
+// through which the VID can pass, where: i) there are no lower active MD levels or ii) there is a
+// maintenance association end point (MEP) at the next lower active MD level on the port.
+//
+// 3 Explicit. The bridge can create MHFs on an associated VID on any port through which the VID
+// can pass, but only if an MEP exists at some lower maintenance level.
+//
+// (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// Sender Id Permission
+// This attribute determines the contents of the sender ID type-length-value (TLV) included in CFM
+// messages transmitted by maintenance points (MPs) controlled by this MD. Chassis ID and
+// management address information is available from the dot1ag chassismanagement info ME. The
+// attribute is an enumeration with the following values.
+//
+// 1 None: the sender ID TLV is not to be sent.
+//
+// 2 Chassis: the chassis ID length, chassis ID subtype, and chassis ID fields of the sender ID TLV
+// are to be sent, but not the management address fields.
+//
+// 3 Manage: the management address fields of the sender ID TLV are to be sent, but the chassis ID
+// length is to be transmitted with the value 0, and the chassis ID subtype, and chassis ID fields
+// are not to be sent.
+//
+// 4 ChassisManage: all chassis ID and management address fields are to be sent.
+//
+// (R,-W, setbycreate) (mandatory) (1-byte)
+//
+type Dot1AgMaintenanceDomain struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ dot1agmaintenancedomainBME = &ManagedEntityDefinition{
+ Name: "Dot1AgMaintenanceDomain",
+ ClassID: 299,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xfc00,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: ByteField("MdLevel", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+ 2: ByteField("MdNameFormat", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+ 3: MultiByteField("MdName1", OctetsAttributeType, 0x2000, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 3),
+ 4: MultiByteField("MdName2", OctetsAttributeType, 0x1000, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 4),
+ 5: ByteField("MaintenanceDomainIntermediatePointHalfFunctionMhfCreation", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
+ 6: ByteField("SenderIdPermission", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 6),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewDot1AgMaintenanceDomain (class ID 299) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewDot1AgMaintenanceDomain(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*dot1agmaintenancedomainBME, params...)
+}