[VOL-4397] Updating omci-lib-go to 2.1.2
Change-Id: I702e34440c96ae65d3cdf3f5f63a08b977ac1bc0
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/geminterworkingterminationpoint.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/geminterworkingterminationpoint.go
new file mode 100644
index 0000000..575d6f9
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/geminterworkingterminationpoint.go
@@ -0,0 +1,189 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// GemInterworkingTerminationPointClassID is the 16-bit ID for the OMCI
+// Managed entity GEM interworking termination point
+const GemInterworkingTerminationPointClassID = ClassID(266) // 0x010a
+
+var geminterworkingterminationpointBME *ManagedEntityDefinition
+
+// GemInterworkingTerminationPoint (Class ID: #266 / 0x010a)
+// An instance of this ME represents a point in the ONU where the IW of a bearer service (usually
+// Ethernet) to the GEM layer takes place. At this point, GEM packets are generated from the bearer
+// bit stream (e.g., Ethernet) or the bearer bit stream is reconstructed from GEM packets.
+//
+// Instances of this ME are created and deleted by the OLT.
+//
+// Relationships
+// One instance of this ME exists for each transformation of a data stream into GEM frames and vice
+// versa.
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies each instance of this ME. (R, setbycreate) (mandatory)
+// (2-bytes)
+//
+// Gem Port Network Ctp Connectivity Pointer
+// This attribute points to an instance of the GEM port network CTP. (R,-W, setbycreate)
+// (mandatory) (2-bytes)
+//
+// Interworking Option
+// This attribute identifies the type of non-GEM function that is being interworked. The options
+// are as follows.
+//
+// 0 Circuit-emulated TDM
+//
+// 1 MAC bridged LAN
+//
+// 2 Reserved
+//
+// 3 Reserved
+//
+// 4 Video return path
+//
+// 5 IEEE 802.1p mapper
+//
+// 6 Downstream broadcast
+//
+// 7 MPLS PW TDM service
+//
+// (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// Service Profile Pointer
+// This attribute points to an instance of a service profile:
+//
+// CES service profile if IW option-=-0
+//
+// MAC bridge service profile if IW option-=-1
+//
+// Video return path service profile if IW option-=-4
+//
+// IEEE 802.1p mapper service profile if IW option-=-5
+//
+// Null pointer if IW option-=-6
+//
+// CES service profile if IW option-=-7
+//
+// (R,-W, setbycreate) (mandatory) (2-bytes)
+//
+// NOTE - The video return path (VRP) service profile is defined in [ITU-T G.984.4].
+//
+// Interworking Termination Point Pointer
+// This attribute is used for the CES and IEEE 802.1p mapper service without a MAC bridge.
+// Depending on the service provided, it points to the associated instance of the following MEs:
+//
+// PPTP CES UNI
+//
+// Logical N * 64 kbit/s sub-port CTP
+//
+// PPTP Ethernet UNI
+//
+// In all other GEM services, the relationship between the related service TP and this GEM IW TP is
+// derived from other ME relations; this attribute is set to a null pointer and not used. (R,-W,
+// setbycreate) (mandatory) (2-bytes)
+//
+// Pptp Counter
+// This value reports the number of PPTP ME instances associated with this GEM IW TP. (R)
+// (optional) (1-byte)
+//
+// Operational State
+// This attribute indicates whether the ME is capable of performing its function. Valid values are
+// enabled (0) and disabled (1). (R) (optional) (1-byte)
+//
+// Gal Profile Pointer
+// 5 GAL Ethernet profile for IEEE 802.1p mapper
+//
+// 6 Null pointer
+//
+// 7 Null pointer
+//
+// (R,-W, setbycreate) (mandatory) (2-bytes)
+//
+// This attribute points to an instance of the GAL profile. The relationship between the IW option
+// and the related GAL profile is as follows.
+//
+// Interworking option GAL profile type
+//
+// 0 Null pointer
+//
+// 1 GAL Ethernet profile
+//
+// 3 GAL Ethernet profile for data service
+//
+// 4 GAL Ethernet profile for video return path
+//
+// Gal Loopback Configuration
+// This attribute sets the loopback configuration when using GEM mode:
+//
+// 0 No loopback
+//
+// 1 Loopback of downstream traffic after GAL
+//
+// The default value of this attribute is 0. When the IW option is 6 (downstream broadcast), this
+// attribute is not used. (R,-W) (mandatory) (1-byte)
+//
+type GemInterworkingTerminationPoint struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ geminterworkingterminationpointBME = &ManagedEntityDefinition{
+ Name: "GemInterworkingTerminationPoint",
+ ClassID: 266,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xff00,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: Uint16Field("GemPortNetworkCtpConnectivityPointer", PointerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+ 2: ByteField("InterworkingOption", EnumerationAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+ 3: Uint16Field("ServiceProfilePointer", PointerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
+ 4: Uint16Field("InterworkingTerminationPointPointer", PointerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
+ 5: ByteField("PptpCounter", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, true, false, 5),
+ 6: ByteField("OperationalState", EnumerationAttributeType, 0x0400, 0, mapset.NewSetWith(Read), true, true, false, 6),
+ 7: Uint16Field("GalProfilePointer", PointerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7),
+ 8: ByteField("GalLoopbackConfiguration", EnumerationAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, false, false, 8),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ Alarms: AlarmMap{
+ 0: "Deprecated",
+ },
+ }
+}
+
+// NewGemInterworkingTerminationPoint (class ID 266) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewGemInterworkingTerminationPoint(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*geminterworkingterminationpointBME, params...)
+}