diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/macbridgeportconfigurationdata.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/macbridgeportconfigurationdata.go
new file mode 100644
index 0000000..24e245d
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/macbridgeportconfigurationdata.go
@@ -0,0 +1,183 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// MacBridgePortConfigurationDataClassID is the 16-bit ID for the OMCI
+// Managed entity MAC bridge port configuration data
+const MacBridgePortConfigurationDataClassID = ClassID(47) // 0x002f
+
+var macbridgeportconfigurationdataBME *ManagedEntityDefinition
+
+// MacBridgePortConfigurationData (Class ID: #47 / 0x002f)
+//	This ME models a port on a MAC bridge. Instances of this ME are created and deleted by the OLT.
+//
+//	Relationships
+//		An instance of this ME is linked to an instance of the MAC bridge service profile. Additional
+//		bridge port control capabilities are provided by implicitly linked instances of some or all of:////		o	MAC bridge port filter table data;////		o	MAC bridge port filter pre-assign table;////		o	VLAN tagging filter data;////		o	Dot1 rate limiter.////		Real-time status of the bridge port is provided by implicitly linked instances of:////		o	MAC bridge port designation data;////		o	MAC bridge port bridge table data;////		o	Multicast subscriber monitor.////		Bridge port PM collection is provided by implicitly linked instances of:////		o	MAC bridge port PM history data;////		o	Ethernet frame PM history data upstream and downstream;////		o	Ethernet frame extended PM (preferred).
+//
+//	Attributes
+//		Managed Entity Id
+//			This attribute uniquely identifies each instance of this ME. (R, setbycreate) (mandatory)
+//			(2-bytes)
+//
+//		Bridge Id Pointer
+//			This attribute points to an instance of the MAC bridge service profile. (R,-W, setbycreate)
+//			(mandatory) (2-bytes)
+//
+//		Port Num
+//			This attribute is the bridge port number. It must be unique among all ports associated with a
+//			particular MAC bridge service profile. (R,-W, setbycreate) (mandatory) (1-byte)
+//
+//		Tp Type
+//			This attribute identifies the type of TP associated with this MAC bridge port. Valid values are
+//			as follows.
+//
+//			1	Physical path termination point Ethernet UNI
+//
+//			2	Interworking virtual circuit connection (VCC) termination point
+//
+//			3	IEEE 802.1p mapper service profile
+//
+//			4	IP host config data or IPv6 host config data
+//
+//			5	GEM interworking termination point
+//
+//			6	Multicast GEM interworking termination point
+//
+//			7	Physical path termination point xDSL UNI part 1
+//
+//			8	Physical path termination point VDSL UNI
+//
+//			9	Ethernet flow termination point
+//
+//			10	Reserved
+//
+//			11	Virtual Ethernet interface point
+//
+//			12	Physical path termination point MoCA UNI
+//
+//			13	Ethernet in the first mile (EFM) bonding group
+//
+//			(R,-W, setbycreate) (mandatory) (1-byte)
+//
+//		Tp Pointer
+//			NOTE 1 - When the TP type is very high-speed digital subscriber line (VDSL) or xDSL, the two
+//			MSBs may be used to indicate a bearer channel.
+//
+//			This attribute points to the TP associated with this MAC bridge port. The TP type attribute
+//			indicates the type of the TP; this attribute contains its instance identifier (ME ID). (R,-W,
+//			setbycreate) (mandatory) (2-bytes)
+//
+//		Port Priority
+//			This attribute denotes the priority of the port for use in (rapid) spanning tree algorithms. The
+//			range is 0..255. (R,-W, setbycreate) (optional) (2-bytes)
+//
+//		Port Path Cost
+//			This attribute specifies the contribution of the port to the path cost towards the spanning tree
+//			root bridge. The range is 1..65535. (R,-W, setbycreate) (mandatory) (2-bytes)
+//
+//		Port Spanning Tree Ind
+//			The Boolean value true enables (R)STP LAN topology change detection at this port. The value
+//			false disables topology change detection. (R,-W, setbycreate) (mandatory) (1-byte)
+//
+//		Deprecated 1
+//			This attribute is not used. If present, it should be ignored by both the ONU and the OLT, except
+//			as necessary to comply with OMCI message definitions. (R,-W, setbycreate) (optional) (1-byte)
+//
+//		Deprecated 2
+//			This attribute is not used. If present, it should be ignored by both the ONU and the OLT, except
+//			as necessary to comply with OMCI message definitions. (R,-W, setbycreate) (1-byte) (optional)
+//
+//		Port Mac Address
+//			If the TP associated with this port has a MAC address, this attribute specifies it. (R)
+//			(optional) (6-bytes)
+//
+//		Outbound Td Pointer
+//			This attribute points to a traffic descriptor that limits the traffic rate leaving the MAC
+//			bridge. (R,-W) (optional) (2-byte)
+//
+//		Inbound Td Pointer
+//			This attribute points to a traffic descriptor that limits the traffic rate entering the MAC
+//			bridge. (R,-W) (optional) (2-byte)
+//
+//		Mac Learning Depth
+//			This attribute specifies the maximum number of MAC addresses to be learned by this MAC bridge
+//			port. The default value 0 specifies that there is no administratively imposed limit. (R,-W,
+//			setbycreate) (optional) (1-byte)
+//
+//			NOTE 2 - If this attribute is not zero, its value overrides the value set in the MAC learning
+//			depth attribute of the MAC bridge service profile.
+//
+//		Lasp Id Pointer
+//			This attribute points to an instance of the LASP ME. (R,W, setbycreate) (optional) (2 bytes)
+//
+type MacBridgePortConfigurationData struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	macbridgeportconfigurationdataBME = &ManagedEntityDefinition{
+		Name:    "MacBridgePortConfigurationData",
+		ClassID: 47,
+		MessageTypes: mapset.NewSetWith(
+			Create,
+			Delete,
+			Get,
+			Set,
+		),
+		AllowedAttributeMask: 0xfffc,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+			1:  Uint16Field("BridgeIdPointer", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+			2:  ByteField("PortNum", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+			3:  ByteField("TpType", EnumerationAttributeType, 0x2000, 1, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
+			4:  Uint16Field("TpPointer", PointerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
+			5:  Uint16Field("PortPriority", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5),
+			6:  Uint16Field("PortPathCost", UnsignedIntegerAttributeType, 0x0400, 1, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 6),
+			7:  ByteField("PortSpanningTreeInd", EnumerationAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7),
+			8:  ByteField("Deprecated1", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, true, 8),
+			9:  ByteField("Deprecated2", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, true, 9),
+			10: MultiByteField("PortMacAddress", OctetsAttributeType, 0x0040, 6, toOctets("AAAAAAAA"), mapset.NewSetWith(Read), false, true, false, 10),
+			11: Uint16Field("OutboundTdPointer", PointerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, true, false, 11),
+			12: Uint16Field("InboundTdPointer", PointerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, true, false, 12),
+			13: ByteField("MacLearningDepth", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 13),
+			14: Uint16Field("LaspIdPointer", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 14),
+		},
+		Access:  CreatedByOlt,
+		Support: UnknownSupport,
+		Alarms: AlarmMap{
+			0: "Port blocking",
+		},
+	}
+}
+
+// NewMacBridgePortConfigurationData (class ID 47) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewMacBridgePortConfigurationData(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*macbridgeportconfigurationdataBME, params...)
+}