diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/macbridgeportdesignationdata.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/macbridgeportdesignationdata.go
new file mode 100644
index 0000000..df0da16
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/macbridgeportdesignationdata.go
@@ -0,0 +1,122 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// MacBridgePortDesignationDataClassID is the 16-bit ID for the OMCI
+// Managed entity MAC bridge port designation data
+const MacBridgePortDesignationDataClassID = ClassID(48) // 0x0030
+
+var macbridgeportdesignationdataBME *ManagedEntityDefinition
+
+// MacBridgePortDesignationData (Class ID: #48 / 0x0030)
+//	This ME records data associated with a bridge port. The ONU automatically creates or deletes an
+//	instance of this managed entity upon the creation or deletion of a MAC bridge port configuration
+//	data ME.
+//
+//	Relationships
+//		An instance of this managed entity is associated with one MAC bridge port configuration data ME.
+//
+//	Attributes
+//		Managed Entity Id
+//			This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is
+//			implicitly linked to an instance of the MAC bridge port configuration data. (R) (mandatory)
+//			(2-bytes)
+//
+//		Designated Bridge Root Cost Port
+//			This attribute contains the designated root, designated cost, designated bridge and designated
+//			port, which are some of the outputs of the read port parameters operation defined in clause
+//			14.8.2.1 of [IEEE-802.1D]:
+//
+//			o	identifier of the designated bridge for the port's segment (8-bytes);
+//
+//			o	bridge identifier of the root transmitted by the designated bridge for the segment (8-bytes);
+//
+//			o	port number of the designated port on the designated bridge considered to be part of this
+//			port's segment (4-bytes);
+//
+//			o	path cost contribution of the designated port to this port's segment (4-bytes).
+//
+//			Upon ME instantiation, the ONU sets this attribute to 0. (R) (mandatory) (24-bytes)
+//
+//		Port State
+//			This attribute provides status information on the port. Valid values include the following.
+//
+//			0	Disabled
+//
+//			1	Listening
+//
+//			2	Learning
+//
+//			3	Forwarding
+//
+//			4	Blocking
+//
+//			5	Linkdown
+//
+//			6	(R)Stp_off
+//
+//			in accordance with [IEEE 802.1D]. (R) (mandatory) (1-byte)
+//
+//			NOTE - The value linkdown is introduced to denote the port status when the Ethernet link state
+//			is down. This value distinguishes the case where Ethernet is physically down from the case where
+//			Ethernet is administratively locked, the latter being denoted by disabled. Be aware that this
+//			terminology violates the ITUT convention that disabled is an operational state, not
+//			administrative.
+//
+//			The value (R)stp_off is introduced to denote the port status where the (rapid) spanning tree
+//			protocol has been disabled by setting the port spanning tree ind attribute of the MAC bridge
+//			port configuration data to false, and the Ethernet link state is up. This value distinguishes
+//			whether frame forwarding is under the control of (R)STP.
+//
+type MacBridgePortDesignationData struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	macbridgeportdesignationdataBME = &ManagedEntityDefinition{
+		Name:    "MacBridgePortDesignationData",
+		ClassID: 48,
+		MessageTypes: mapset.NewSetWith(
+			Get,
+		),
+		AllowedAttributeMask: 0xc000,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+			1: MultiByteField("DesignatedBridgeRootCostPort", OctetsAttributeType, 0x8000, 24, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA"), mapset.NewSetWith(Read), false, false, false, 1),
+			2: ByteField("PortState", EnumerationAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2),
+		},
+		Access:  CreatedByOnu,
+		Support: UnknownSupport,
+	}
+}
+
+// NewMacBridgePortDesignationData (class ID 48) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewMacBridgePortDesignationData(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*macbridgeportdesignationdataBME, params...)
+}