[VOL-4397] Updating omci-lib-go to 2.1.2
Change-Id: I702e34440c96ae65d3cdf3f5f63a08b977ac1bc0
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/mplspseudowireterminationpoint.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/mplspseudowireterminationpoint.go
new file mode 100644
index 0000000..ed2ec34
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/mplspseudowireterminationpoint.go
@@ -0,0 +1,213 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// MplsPseudowireTerminationPointClassID is the 16-bit ID for the OMCI
+// Managed entity MPLS pseudowire termination point
+const MplsPseudowireTerminationPointClassID = ClassID(333) // 0x014d
+
+var mplspseudowireterminationpointBME *ManagedEntityDefinition
+
+// MplsPseudowireTerminationPoint (Class ID: #333 / 0x014d)
+// This ME contains the configuration data of a pseudowire whose underlying transport method is
+// MPLS. Instances of this ME are created and deleted by the OLT.
+//
+// Relationships
+// Zero or one instance of this ME is associated with each instance of the pseudowire TP ME.
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies each instance of this ME. (R, setbycreate)-(mandatory) (2
+// bytes)
+//
+// Tp Type
+// This attribute specifies the type of ANI-side TP associated with this-ME.
+//
+// 1 Ethernet flow termination point
+//
+// 2 GEM IW TP
+//
+// 3 TCP/UDP config data
+//
+// 4 MPLS pseudowire termination point
+//
+// NOTE - If this instance of the MPLS PW TP is pointed to by another instance of the MPLS PW TP
+// (i.e., whose TP type-= 4), this instance represents a tunnelled MPLS flow, and the following
+// attributes are not meaningful: MPLS PW direction; MPLS PW uplink label; MPLS PW downlink label;
+// and MPLS PW TC. These attributes should be set to the proper number of 0x00 bytes by the OLT and
+// ignored by the ONU.
+//
+// (R, W, setbycreate) (mandatory) (1 byte)
+//
+// Tp Pointer
+// This attribute points to the instance of the TP associated with this MPLS PW TP. The type of the
+// associated TP is determined by the TP type attribute. (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Mpls Label Indicator
+// This attribute specifies the MPLS label stacking situation.
+//
+// 0 Single MPLS labelled
+//
+// 1 Double MPLS labelled
+//
+// (R, W, setbycreate) (mandatory) (1 byte)
+//
+// Mpls Pw Direction
+// This attribute specifies the inner MPLS direction.
+//
+// 0 Upstream only
+//
+// 1 Downstream only
+//
+// 2 Bidirectional
+//
+// (R, W, setbycreate) (mandatory) (1 byte)
+//
+// Mpls Pw Uplink Label
+// This attribute specifies the label of the inner MPLS pseudowire upstream. The attribute is not
+// meaningful for unidirectional downstream PWs. (R, W, setbycreate) (mandatory) (4 bytes)
+//
+// Mpls Pw Downlink Label
+// This attribute specifies the label of the inner MPLS pseudowire downstream. The attribute is not
+// meaningful for unidirectional upstream PWs. (R, W, setbycreate) (mandatory) (4 bytes)
+//
+// Mpls Pw Tc
+// NOTE 1 - The TC field was previously known as EXP. Refer to [bIETF-RFC-5462].
+//
+// This attribute specifies the inner MPLS TC value in the upstream direction. The attribute is not
+// meaningful for unidirectional downstream PWs. (R, W, setbycreate) (mandatory) (1 byte)
+//
+// Mpls Tunnel Direction
+// This attribute specifies the direction of the (outer) MPLS tunnel.
+//
+// 0 Upstream only
+//
+// 1 Downstream only
+//
+// 2 Bidirectional
+//
+// (R, W, setbycreate) (mandatory for double-labelled case) (1 byte)
+//
+// Mpls Tunnel Uplink Label
+// This attribute specifies the (outer) label for the upstream MPLS tunnel. If the MPLS tunnel is
+// downstream only, this attribute should be set to 0. (R, W, setbycreate) (mandatory for double-
+// labelled case) (4 bytes)
+//
+// Mpls Tunnel Downlink Label
+// This attribute specifies the (outer) label for the downstream MPLS tunnel. If the MPLS tunnel is
+// upstream only, this attribute should be set to 0. (R, W, setbycreate) (mandatory for double-
+// labelled case) (4 bytes)
+//
+// Mpls Tunnel Tc
+// This attribute specifies the TC value of the upstream MPLS tunnel. If the MPLS tunnel is
+// downstream only, this attribute should be set to 0. (R, W, setbycreate) (mandatory for double
+// MPLS labelled case) (1 byte)
+//
+// NOTE 2 - The TC field was previously known as EXP. Refer to [bIETF-RFC-5462].
+//
+// Pseudowire Type
+// This attribute specifies the emulated service to be carried over this PW. The values are from
+// [IETF RFC 4446].
+//
+// 2 ATM AAL5 SDU VCC transport
+//
+// 3 ATM transparent cell transport
+//
+// 5 Ethernet
+//
+// 9 ATM n-to-one VCC cell transport
+//
+// 10 ATM n-to-one VPC cell transport
+//
+// 12 ATM one-to-one VCC cell mode
+//
+// 13 ATM one-to-one VPC cell mode
+//
+// 14 ATM AAL5 PDU VCC transport
+//
+// All other values are reserved.
+//
+// (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Pseudowire Control Word Preference
+// When set to true, this Boolean attribute specifies that a control word is to be sent with each
+// packet. Some PW types mandate the use of a control word in any event. In such cases, the value
+// configured for this attribute has no effect on the presence of the control word. (R, W,
+// setbycreate) (optional) (1 byte)
+//
+// Administrative State
+// This attribute locks (1) and unlocks (0) the functions performed by the MPLS pseudowire TP.
+// Administrative state is further described in clause-A.1.6. (R,-W) (optional) (1-byte)
+//
+// Operational State
+// This attribute reports whether the ME is currently capable of performing its function. Valid
+// values are enabled (0) and disabled (1). (R) (optional) (1-byte)
+//
+type MplsPseudowireTerminationPoint struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ mplspseudowireterminationpointBME = &ManagedEntityDefinition{
+ Name: "MplsPseudowireTerminationPoint",
+ ClassID: 333,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xfffe,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: ByteField("TpType", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+ 2: Uint16Field("TpPointer", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+ 3: ByteField("MplsLabelIndicator", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
+ 4: ByteField("MplsPwDirection", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
+ 5: Uint32Field("MplsPwUplinkLabel", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
+ 6: Uint32Field("MplsPwDownlinkLabel", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 6),
+ 7: ByteField("MplsPwTc", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7),
+ 8: ByteField("MplsTunnelDirection", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 8),
+ 9: Uint32Field("MplsTunnelUplinkLabel", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 9),
+ 10: Uint32Field("MplsTunnelDownlinkLabel", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 10),
+ 11: ByteField("MplsTunnelTc", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 11),
+ 12: Uint16Field("PseudowireType", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 12),
+ 13: ByteField("PseudowireControlWordPreference", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 13),
+ 14: ByteField("AdministrativeState", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, Write), false, true, false, 14),
+ 15: ByteField("OperationalState", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read), true, true, false, 15),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewMplsPseudowireTerminationPoint (class ID 333) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewMplsPseudowireTerminationPoint(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*mplspseudowireterminationpointBME, params...)
+}