diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/multicastoperationsprofile.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/multicastoperationsprofile.go
new file mode 100644
index 0000000..9db7284
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/multicastoperationsprofile.go
@@ -0,0 +1,280 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// MulticastOperationsProfileClassID is the 16-bit ID for the OMCI
+// Managed entity Multicast operations profile
+const MulticastOperationsProfileClassID = ClassID(309) // 0x0135
+
+var multicastoperationsprofileBME *ManagedEntityDefinition
+
+// MulticastOperationsProfile (Class ID: #309 / 0x0135)
+//	This ME expresses multicast policy. A multi-dwelling unit ONU may have several such policies,
+//	which are linked to subscribers as required. Some of the attributes configure IGMP snooping and
+//	proxy parameters if the defaults do not suffice, as described in [IETF-RFC-2236], [IETF-RFC
+//	3376], [IETF RFC 3810] and [IETF RFC 5519]. Instances of this ME are created and deleted by the
+//	OLT.
+//
+//	Relationships
+//		An instance of this ME may be associated with zero or more instances of the multicast subscriber
+//		config info ME.
+//
+//	Attributes
+//		Managed Entity Id
+//			This attribute uniquely identifies each instance of this ME. The values 0 and 0xFFFF are
+//			reserved. (R, setbycreate) (mandatory) (2-bytes)
+//
+//		Igmp Version
+//			This attribute specifies the version of IGMP to be supported. Support of a given version implies
+//			compatible support of previous versions. If the ONU cannot support the version requested, it
+//			should deny an attempt to set the attribute. (R,W, set-by-create) (mandatory) (1 byte)
+//
+//			1	IGMP version 1 (deprecated)
+//
+//			2	IGMP version 2
+//
+//			3	IGMP version 3
+//
+//			16	MLD version 1
+//
+//			17	MLD version 2
+//
+//			Other values are reserved.
+//
+//		Igmp Function
+//			This attribute enables an IGMP function. The value 0 specifies transparent IGMP snooping only.
+//			The value 1 specifies snooping with proxy reporting (SPR); the value 2 specifies IGMP proxy. The
+//			function must be consistent with the capabilities specified by the other IGMP configuration
+//			attributes. (R,W, setbycreate) (mandatory) (1-byte)
+//
+//		Immediate Leave
+//			This Boolean attribute controls the immediate leave function. The value false disables immediate
+//			leave; true enables immediate leave. (R,W, setbycreate) (mandatory) (1-byte)
+//
+//		Upstream Igmp Tci
+//			Under control of the upstream IGMP tag control attribute, the upstream IGMP TCI attribute
+//			defines a VLAN ID and P-bits to add to upstream IGMP messages. (R,-W, setbycreate) (optional)
+//			(2-bytes)
+//
+//		Upstream Igmp Tag Control
+//			2	Replace the entire TCI (VLAN ID plus P bits) on upstream IGMP/MLD traffic. The new tag is
+//			specified by the upstream IGMP/MLD TCI attribute. If the received IGMP/MLD traffic is untagged,
+//			an add operation is performed.
+//
+//			3	Replace only the VLAN ID on upstream IGMP/MLD traffic, retaining the original DEI and P bits.
+//			The new VLAN ID is specified by the VLAN ID field of the upstream IGMP TCI attribute. If the
+//			received IGMP/MLD traffic is untagged, an add operation is performed, with DEI and P bits also
+//			taken from the upstream IGMP TCI attribute.
+//
+//			Other values are reserved.
+//
+//			This attribute controls the upstream IGMP TCI attribute. If this attribute is non-zero, a
+//			possible extended VLAN tagging operation ME is ignored for upstream frames containing IGMP/MLD
+//			packets. (R,-W, setbycreate) (optional) (1-byte)
+//
+//			Value	Meaning
+//
+//			0	Pass upstream IGMP/MLD traffic transparently, neither adding, stripping nor modifying tags
+//			that may be present.
+//
+//			1	Add a VLAN tag (including P bits) to upstream IGMP/MLD traffic. The tag is specified by the
+//			upstream IGMP TCI attribute.
+//
+//		Upstream Igmp Rate
+//			This attribute limits the maximum rate of upstream IGMP traffic. Traffic in excess of this limit
+//			is silently discarded. The attribute value is specified in messages/second. The recommended
+//			default value 0 imposes no rate limit on this traffic. (R,-W, setbycreate) (optional) (4-bytes)
+//
+//		Dynamic Access Control List Table
+//			This attribute is a list that specifies one or more multicast group address ranges. Each row in
+//			the list comprises up to three row parts, where each row part is 24-bytes long. Each entry must
+//			include row part 0. The ONU may also support row parts 1-2, thus allowing the table to contain
+//			logical rows that exceed the 24-byte definition of row part 0.
+//
+//		Static Access Control List Table
+//			This attribute is a list that specifies one or more multicast group address ranges. Groups
+//			defined in this list are multicast on the associated UNI(s) unconditionally, i.e., without the
+//			need for an IGMP join. The bandwidth of static multicast groups is not included in the current
+//			multicast bandwidth measurement maintained by the multicast subscriber monitor ME. If a join
+//			message is always expected, this table may be empty. Table entries have the same format as those
+//			in the dynamic access control list table. The preview fields are not meaningful. (R,-W)
+//			(mandatory) (each row part: 24 bytes)
+//
+//		Lost Groups List Table
+//			This attribute is a list of groups from the dynamic access control list table for which there is
+//			an active join, but no downstream flow is present, possibly because of source failure, but also
+//			possibly because of misconfiguration somewhere upstream. Be aware of possible ambiguity between
+//			overlapping service providers and IPv4/IPv6 addresses. After a join, the ONU should wait a
+//			reasonable time for upstream processing before declaring a group to be lost. Each entry is a
+//			vector of the following components:
+//
+//			-	VLAN ID, 0 if not used (2-bytes)
+//
+//			-	Source IP address, 0.0.0.0 if not used. In IPv6, this field captures only the four least
+//			significant bytes. (4-bytes)
+//
+//			-	Multicast destination IP address. In IPv6, this field captures only the four least significant
+//			bytes. (4-bytes)
+//
+//			(R) (optional) (10N bytes)
+//
+//		Robustness
+//			This attribute allows tuning for possible packet loss in the network. The recommended default
+//			value 0 causes the ONU to follow [IETF RFC 3376] to copy the robustness value from query
+//			messages originating further upstream. (R,-W, setbycreate) (optional) (1-byte)
+//
+//		Querier Ip Address
+//			This attribute specifies the IP address to be used by a proxy querier. Although it is not a
+//			legitimate IP address, the recommended default value 0.0.0.0 is legal in this case (see [b-IETF
+//			RFC 4541]). (R,-W, setbycreate) (optional) (4-bytes)
+//
+//		Query Interval
+//			This attribute specifies the interval between general queries in seconds. The value 0 specifies
+//			that the ONU uses its own default, which may or may not be the same as the recommended default
+//			of 125-s. (R,-W, set-by-create) (optional) (4-bytes)
+//
+//		Query Max Response Time
+//			This attribute is the max response time added by the proxy into general query messages directed
+//			to UNIs. It is expressed in units of 0.1-s. The value 0 specifies that the ONU uses its own
+//			default, which may or may not be the same as the recommended default of 100 (10-s). (R,-W,
+//			setby-create) (optional) (4-bytes)
+//
+//		Last Member Query Interval
+//			This attribute specifies the maximum response time inserted into group-specific queries sent to
+//			UNIs in response to group leave messages. It is also the repetition rate of [robustness]
+//			transmissions of the query. It is specified in units of 0.1-s, with a default of 10 (1-s).
+//			(R,-W) (optional) (4-bytes)
+//
+//		Unauthorized Join Request Behaviour
+//			This Boolean attribute specifies the ONU's behaviour when it receives an IGMP join request for a
+//			group that is not authorized in the dynamic address control list table, or an IGMPv3 membership
+//			report for groups, none of which are authorized in the dynamic ACL. The default value false
+//			specifies that the ONU silently discard the IGMP request; the value true specifies that the ONU
+//			forwards the request upstream. The ONU does not attempt to honour the request for the
+//			unauthorized group(s) in either case. (R,-W) (optional) (1-byte)
+//
+//		Downstream IGMP and multicast TCI
+//			This attribute controls the downstream tagging of both the IGMP/MLD and multicast frames. If the
+//			first byte of this attribute is non-zero, a possible extended VLAN tagging operation ME is
+//			ignored for downstream IGMP/MLD and multicast frames. (R,-W, set-by-create) (optional) (3-bytes)
+//
+//			The first byte defines the control type:
+//
+//			Value	Meaning
+//
+//			0	Pass the downstream IGMP/MLD and multicast traffic transparently, neither stripping nor
+//			modifying tags that may be present.
+//
+//			1	Strip the outer VLAN tag (including P bits) from the downstream IGMP/MLD and multicast
+//			traffic.
+//
+//			2	Add a tag on to the downstream IGMP/MLD and multicast traffic. The new tag is specified by the
+//			second and third bytes of this attribute.
+//
+//			3	Replace the tag on the downstream IGMP/MLD and multicast traffic. The new tag is specified by
+//			the second and third bytes of this attribute.
+//
+//			4	Replace only the VLAN ID on the downstream IGMP/MLD and multicast traffic, retaining the
+//			original DEI and P bits. The new VLAN ID is specified by the VLAN ID field of the second and
+//			third bytes of this attribute.
+//
+//			5	Add a tag on to the downstream IGMP/MLD and multicast traffic. The new tag is specified by the
+//			VID (UNI) field of the multicast service package table row of the multicast subscriber config
+//			info ME that is associated with this profile. If the VID (UNI) field is unspecified (0xFFFF) or
+//			specifies untagged traffic, the new tag is specified by the second and third bytes of this
+//			attribute.
+//
+//			6	Replace the tag on the downstream IGMP/MLD and multicast traffic. The new tag is specified by
+//			the VID (UNI) field of the multicast service package table row of the multicast subscriber
+//			config info ME that is associated with this profile. If the VID (UNI) field specifies untagged
+//			traffic, the outer VLAN tag (including P bits) is stripped from the downstream IGMP/MLD and
+//			multicast traffic. If the value of the VID (UNI) is unspecified (0xFFFF), the new tag is
+//			specified by the second and third bytes of this attribute.
+//
+//			7	Replace only the VID on the downstream IGMP/MLD and multicast traffic, retaining the original
+//			DEI and P bits. The new VLAN ID is specified by the VID (UNI) field of the multicast service
+//			package table row of the multicast subscriber config info ME that is associated with this
+//			profile. If the VID (UNI) field specifies untagged traffic, the outer VLAN tag (including P
+//			bits) is stripped from the downstream IGMP/MLD and multicast traffic. If the value of the VID
+//			(UNI) is unspecified (0xFFFF), the new tag is specified by the second and third bytes of this
+//			attribute.
+//
+//			Other values are reserved.
+//
+//			The second and third bytes define the TCI (VLAN ID and P bits) to be applied on the downstream
+//			IGMP/MLD and multicast streams in case the replace or add option is selected.
+//
+type MulticastOperationsProfile struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	multicastoperationsprofileBME = &ManagedEntityDefinition{
+		Name:    "MulticastOperationsProfile",
+		ClassID: 309,
+		MessageTypes: mapset.NewSetWith(
+			Create,
+			Delete,
+			Get,
+			GetNext,
+			Set,
+			SetTable,
+		),
+		AllowedAttributeMask: 0xffff,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+			1:  ByteField("IgmpVersion", EnumerationAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+			2:  ByteField("IgmpFunction", EnumerationAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+			3:  ByteField("ImmediateLeave", EnumerationAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
+			4:  Uint16Field("UpstreamIgmpTci", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 4),
+			5:  ByteField("UpstreamIgmpTagControl", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5),
+			6:  Uint32Field("UpstreamIgmpRate", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 6),
+			7:  TableField("DynamicAccessControlListTable", TableAttributeType, 0x0200, TableInfo{nil, 24}, mapset.NewSetWith(Read, Write), false, false, false, 7),
+			8:  TableField("StaticAccessControlListTable", TableAttributeType, 0x0100, TableInfo{nil, 24}, mapset.NewSetWith(Read, Write), false, false, false, 8),
+			9:  TableField("LostGroupsListTable", TableAttributeType, 0x0080, TableInfo{nil, 10}, mapset.NewSetWith(Read), false, true, false, 9),
+			10: ByteField("Robustness", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 10),
+			11: Uint32Field("QuerierIpAddress", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 11),
+			12: Uint32Field("QueryInterval", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 12),
+			13: Uint32Field("QueryMaxResponseTime", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 13),
+			14: Uint32Field("LastMemberQueryInterval", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, Write), false, true, false, 14),
+			15: ByteField("UnauthorizedJoinRequestBehaviour", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, Write), false, true, false, 15),
+			16: MultiByteField("DownstreamIgmpAndMulticastTci", OctetsAttributeType, 0x0001, 3, toOctets("AAAA"), mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 16),
+		},
+		Access:  CreatedByOlt,
+		Support: UnknownSupport,
+		Alarms: AlarmMap{
+			0: "Lost multicast group",
+		},
+	}
+}
+
+// NewMulticastOperationsProfile (class ID 309) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewMulticastOperationsProfile(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*multicastoperationsprofileBME, params...)
+}