[VOL-4397] Updating omci-lib-go to 2.1.2
Change-Id: I702e34440c96ae65d3cdf3f5f63a08b977ac1bc0
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/multicastsubscribermonitor.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/multicastsubscribermonitor.go
new file mode 100644
index 0000000..a43d342
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/multicastsubscribermonitor.go
@@ -0,0 +1,153 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// MulticastSubscriberMonitorClassID is the 16-bit ID for the OMCI
+// Managed entity Multicast subscriber monitor
+const MulticastSubscriberMonitorClassID = ClassID(311) // 0x0137
+
+var multicastsubscribermonitorBME *ManagedEntityDefinition
+
+// MulticastSubscriberMonitor (Class ID: #311 / 0x0137)
+// This ME provides the current status of each port with respect to its multicast subscriptions. It
+// may be useful for status monitoring or debugging purposes. The status table includes all dynamic
+// groups currently subscribed by the port.
+//
+// Relationships
+// Instances of this ME are created and deleted at the request of the OLT. One instance may exist
+// for each IEEE-802.1 UNI configured to support multicast subscription.
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is
+// implicitly linked to an instance of the MAC bridge port configuration data or IEEE-802.1p mapper
+// ME. (R,-setbycreate) (mandatory) (2-bytes)
+//
+// Me Type
+// This attribute indicates the type of the ME implicitly linked by the ME ID attribute.
+//
+// 0 MAC bridge port config data
+//
+// 1 IEEE-802.1p mapper service profile
+//
+// (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// Current Multicast Bandwidth
+// This attribute is the ONU's (BE) estimate of the actual bandwidth currently being delivered to
+// this particular MAC bridge port over all dynamic multicast groups. (R) (optional) (4-bytes)
+//
+// Join Messages Counter
+// This attribute counts the number of times the corresponding subscriber sent a join message that
+// was accepted. When full, the counter rolls over to 0. (R) (optional) (4-bytes)
+//
+// Bandwidth Exceeded Counter
+// This attribute counts the number of join messages that did exceed, or would have exceeded, the
+// max multicast bandwidth, whether accepted or denied. When full, the counter rolls over to 0. (R)
+// (optional) (4-bytes)
+//
+// Ipv4 Active Group List Table
+// This attribute lists the groups from one of the related dynamic access control list tables or
+// the allowed preview groups table that are currently being actively forwarded, along with the
+// actual bandwidth of each. If a join has been recognized from more than one IPv4 source address
+// for a given group on this UNI, there will be one table entry for each. Each table entry has the
+// following form.
+//
+// - VLAN ID, 0 if not used (2-bytes)
+//
+// - Source IP address, 0.0.0.0 if not used (4-bytes)
+//
+// - Multicast destination IP address (4-bytes)
+//
+// - Best efforts actual bandwidth estimate, bytes per second (4-bytes)
+//
+// - Client (set-top box) IP address, i.e., the IP address of the device currently joined (4-bytes)
+//
+// - Time since the most recent join of this client to the IP channel, in seconds (4-bytes)
+//
+// - Reserved (2-bytes)
+//
+// (R) (mandatory) (24N bytes)
+//
+// Ipv6 Active Group List Table
+// - Time since the most recent join of this client to the IP channel, in seconds (4-bytes)
+//
+// (R) (optional) (58N bytes)
+//
+// This attribute lists the groups from one of the related dynamic access control list tables or
+// the allowed preview groups table that are currently being actively forwarded, along with the
+// actual bandwidth of each. If a join has been recognized from more than one IPv6 source address
+// for a given group on this UNI, there will be one table entry for each. In mixed IPv4-IPv6
+// scenarios, it is possible that some fields might be IPv4, in which case their 12 most
+// significant bytes of the given field are set to zero. Each table entry has the form:
+//
+// - VLAN ID, 0 if not used (2-bytes)
+//
+// - Source IP address, 0 if not used (16-bytes)
+//
+// - Multicast destination IP address (16-bytes)
+//
+// - Best efforts actual bandwidth estimate, bytes per second (4-bytes)
+//
+// - Client (set-top box) IP address, i.e., the IP address of the device currently joined
+// (16-bytes)
+//
+type MulticastSubscriberMonitor struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ multicastsubscribermonitorBME = &ManagedEntityDefinition{
+ Name: "MulticastSubscriberMonitor",
+ ClassID: 311,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ GetNext,
+ Set,
+ ),
+ AllowedAttributeMask: 0xfc00,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: ByteField("MeType", EnumerationAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+ 2: Uint32Field("CurrentMulticastBandwidth", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, true, false, 2),
+ 3: Uint32Field("JoinMessagesCounter", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, true, false, 3),
+ 4: Uint32Field("BandwidthExceededCounter", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, true, false, 4),
+ 5: TableField("Ipv4ActiveGroupListTable", TableAttributeType, 0x0800, TableInfo{nil, 24}, mapset.NewSetWith(Read), false, false, false, 5),
+ 6: TableField("Ipv6ActiveGroupListTable", TableAttributeType, 0x0400, TableInfo{nil, 58}, mapset.NewSetWith(Read), false, true, false, 6),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewMulticastSubscriberMonitor (class ID 311) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewMulticastSubscriberMonitor(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*multicastsubscribermonitorBME, params...)
+}