diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/physicalpathterminationpointreuni.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/physicalpathterminationpointreuni.go
new file mode 100644
index 0000000..ac1492e
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/physicalpathterminationpointreuni.go
@@ -0,0 +1,229 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// PhysicalPathTerminationPointReUniClassID is the 16-bit ID for the OMCI
+// Managed entity Physical path termination point RE UNI
+const PhysicalPathTerminationPointReUniClassID = ClassID(314) // 0x013a
+
+var physicalpathterminationpointreuniBME *ManagedEntityDefinition
+
+// PhysicalPathTerminationPointReUni (Class ID: #314 / 0x013a)
+//	This ME represents an S'/R' interface in a mid-span PON RE that supports OEO regeneration in at
+//	least one direction, where physical paths terminate and physical path level functions are
+//	performed (transmit or receive).
+//
+//	Such an RE automatically creates an instance of this ME for each S'/R' interface port as
+//	follows.
+//
+//	o	When the RE has mid-span PON RE UNI interface ports built into its factory configuration.
+//
+//	o	When a cardholder is provisioned to expect a circuit pack of the mid-span PON RE UNI type.
+//
+//	o	When a cardholder provisioned for plug-and-play is equipped with a circuit pack of the midspan
+//	PON RE UNI type. Note that the installation of a plug-and-play card may indicate the presence of
+//	a mid-span PON RE UNI port via equipment ID as well as its type attribute, and indeed may cause
+//	the management ONU to instantiate a port-mapping package to specify the ports precisely.
+//
+//	The management ONU automatically deletes instances of this ME when a cardholder is neither
+//	provisioned to expect a mid-span PON RE UNI circuit pack, nor is it equipped with a mid-span PON
+//	RE UNI circuit pack.
+//
+//	As illustrated in Figure 8.2.10-3, a PPTP RE UNI may share the physical port with an RE upstream
+//	amplifier. The ONU declares a shared configuration through the port-mapping package combined
+//	port table, whose structure defines one ME as the master. It is recommended that the PPTP RE UNI
+//	be the master, with the RE upstream amplifier as a secondary ME.
+//
+//	The administrative state, operational state and ARC attributes of the master ME override similar
+//	attributes in secondary MEs associated with the same port. In the secondary ME, these attributes
+//	are present, but cause no action when written and have undefined values when read. The RE
+//	upstream amplifier should use its provisionable upstream alarm thresholds and should declare
+//	upstream alarms as necessary; other isomorphic alarms should be declared by the PPTP RE UNI. The
+//	test action should be addressed to the master ME.
+//
+//	Relationships
+//		An instance of this ME is associated with each instance of a mid-span PON RE S'/R' physical
+//		interface of an RE that includes OEO regeneration in either direction, and it may also be
+//		associated with an RE upstream amplifier.
+//
+//	Attributes
+//		Managed Entity Id
+//			This attribute uniquely identifies each instance of this ME. This 2-byte number indicates the
+//			physical position of the UNI. The first byte is the slot ID (defined in clause 9.1.5). The
+//			second byte is the port ID, with the range 1..255. (R) (mandatory) (2-bytes)
+//
+//			NOTE 1 - This ME ID may be identical to that of an RE upstream amplifier if it shares the same
+//			physical slot and port.
+//
+//		Administrative State
+//			This attribute locks (1) and unlocks (0) the functions performed by this ME. Administrative
+//			state is further described in clause A.1.6. (R,-W) (mandatory) (1-byte)
+//
+//			NOTE 2 - Administrative lock of a PPTP RE UNI results in loss of signal to any downstream ONUs.
+//
+//		Operational State
+//			This attribute indicates whether the ME is capable of performing its function. Valid values are
+//			enabled (0) and disabled (1). (R) (optional) (1-byte)
+//
+//		Arc
+//			See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+//		Arc Interval
+//			See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+//		Re Ani_G Pointer
+//			RE ANI-G pointer: This attribute points to an RE ANI-G instance. (R,-W) (mandatory) (2-bytes)
+//
+//		Total Optical Receive Signal Level Table
+//			This table attribute reports a series of measurements of time averaged received upstream optical
+//			signal power. The measurement circuit should have a temporal response similar to a simple 1-pole
+//			low pass filter, with an effective time constant of the order of a GTC frame time. Each table
+//			entry has a 2-byte frame counter field (most significant end), and a 2-byte power measurement
+//			field. The frame counter field contains the least significant 16-bits of the superframe counter
+//			received closest to the time of the measurement. The power measurement field is a 2s complement
+//			integer referred to 1-mW (i.e., dBm), with 0.002-dB granularity. (Coding -32768 to +32767, where
+//			0x00 = 0-dBm, 0x03e8 = +2-dBm, etc.) The RE equipment should add entries to this table as
+//			frequently as is reasonable. The RE should clear the table once it is read by the OLT. (R)
+//			(optional) (4-* N-bytes, where N is the number of measurements present.)
+//
+//		Per Burst Receive Signal Level Table
+//			This table attribute reports the most recent measurement of received burst upstream optical
+//			signal power. Each table entry has a 2-byte ONU-ID field (most significant end), and a 2-byte
+//			power measurement field. The power measurement field is a 2s complement integer referred to 1-mW
+//			(i.e.,-dBm), with 0.002-dB granularity. (Coding -32768 to +32767, where 0x00 = 0-dBm, 0x03e8 =
+//			+2-dBm, etc.) (R) (optional) (4-* N-bytes, where N is the number of distinct ONUs connected to
+//			the S'/R' interface.)
+//
+//		Lower Receive Optical Threshold
+//			This attribute specifies the optical level that the RE uses to declare the burst mode low
+//			received optical power alarm. Valid values are  -127-dBm (coded as 254) to 0-dBm (coded as 0) in
+//			0.5-dB increments. The default value 0xFF selects the RE's internal policy. (R,-W) (optional)
+//			(1-byte)
+//
+//		Upper Receive Optical Threshold
+//			This attribute specifies the optical level that the RE uses to declare the burst mode high
+//			optical power alarm. Valid values are  -127-dBm (coded as 254) to 0-dBm (coded as 0) in 0.5-dB
+//			increments. The default value 0xFF selects the RE's internal policy. (R,-W) (optional) (1-byte)
+//
+//		Transmit Optical Level
+//			This attribute reports the current measurement of the downstream mean optical launch power. Its
+//			value is a 2s complement integer referred to 1-mW (i.e., dBm), with 0.002-dB granularity. (R)
+//			(optional) (2-bytes)
+//
+//		Lower Transmit Power Threshold
+//			This attribute specifies the downstream minimum mean optical launch power at the S'/R' interface
+//			that the RE uses to declare the low transmit optical power alarm. Its value is a 2s complement
+//			integer referred to 1-mW (i.e., dBm), with 0.5-dB granularity. The default value 0x7F selects
+//			the RE's internal policy. (R,-W) (optional) (1-byte)
+//
+//		Upper Transmit Power Threshold
+//			This attribute specifies the downstream maximum mean optical launch power at the S'/R' interface
+//			that the RE uses to declare the high transmit optical power alarm. Its value is a 2s complement
+//			integer referred to 1-mW (i.e., dBm), with 0.5-dB granularity. The default value 0x7F selects
+//			the RE's internal policy. (R,-W) (optional) (1-byte)
+//
+//		Additional Preamble
+//			This attribute indicates the number of bytes of PLOu preamble that are unavoidably consumed
+//			while passing the RE. (R) (mandatory) (1-byte)
+//
+//		Additional Guard Time
+//			This attribute indicates the number of bytes of extra guard time that are needed to ensure
+//			correct operation with the RE. (R) (mandatory) (1-byte)
+//
+//		Connected Onus Table
+//			s attribute is used to pass ONU ID information of the connected ONUs per RE UNI. The get, get
+//			next sequence must be used with this attribute since its size is unspecified. Upon ME
+//			instantiation, this attribute is an empty list.
+//
+//			Each entry contains:
+//
+//			- ONU ID (2-bytes)
+//
+//			(R) (optional) (2N bytes, where N is the number of-ONUs)
+//
+//		Clear Onu Table
+//			the attribute is used to notify RE to clear the entire Connected ONUs table by OLT. The OLT must
+//			insure that the ONU IDs have been retrieved before clearing the table, or loss of data may
+//			occur.
+//
+//			When the value of the byte is set to 1, the RE clears the entire Connected ONUs table and resets
+//			the byte to 0.
+//
+//			(W) (optional) (1 byte)
+//
+type PhysicalPathTerminationPointReUni struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	physicalpathterminationpointreuniBME = &ManagedEntityDefinition{
+		Name:    "PhysicalPathTerminationPointReUni",
+		ClassID: 314,
+		MessageTypes: mapset.NewSetWith(
+			Get,
+			GetNext,
+			Set,
+		),
+		AllowedAttributeMask: 0xffff,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+			1:  ByteField("AdministrativeState", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
+			2:  ByteField("OperationalState", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), true, true, false, 2),
+			3:  ByteField("Arc", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), true, true, false, 3),
+			4:  ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, true, false, 4),
+			5:  Uint16Field("ReAniGPointer", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5),
+			6:  TableField("TotalOpticalReceiveSignalLevelTable", TableAttributeType, 0x0400, TableInfo{nil, 4}, mapset.NewSetWith(Read), false, true, false, 6),
+			7:  TableField("PerBurstReceiveSignalLevelTable", TableAttributeType, 0x0200, TableInfo{nil, 4}, mapset.NewSetWith(Read), false, true, false, 7),
+			8:  ByteField("LowerReceiveOpticalThreshold", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, true, false, 8),
+			9:  ByteField("UpperReceiveOpticalThreshold", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, true, false, 9),
+			10: Uint16Field("TransmitOpticalLevel", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, true, false, 10),
+			11: ByteField("LowerTransmitPowerThreshold", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, true, false, 11),
+			12: ByteField("UpperTransmitPowerThreshold", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, true, false, 12),
+			13: ByteField("AdditionalPreamble", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, false, false, 13),
+			14: ByteField("AdditionalGuardTime", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, false, false, 14),
+			15: TableField("ConnectedOnusTable", TableAttributeType, 0x0002, TableInfo{nil, 2}, mapset.NewSetWith(Read), false, true, false, 15),
+			16: TableField("ClearOnuTable", TableAttributeType, 0x0001, TableInfo{nil, 1}, mapset.NewSetWith(Write), false, true, false, 16),
+		},
+		Access:  CreatedByOnu,
+		Support: UnknownSupport,
+		Alarms: AlarmMap{
+			0: "Low received optical power",
+			1: "High received optical power",
+			2: "Low transmit optical power",
+			3: "High transmit optical power",
+			4: "High laser bias current",
+			5: "S'/R' LOS",
+		},
+	}
+}
+
+// NewPhysicalPathTerminationPointReUni (class ID 314) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewPhysicalPathTerminationPointReUni(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*physicalpathterminationpointreuniBME, params...)
+}