[VOL-4397] Updating omci-lib-go to 2.1.2
Change-Id: I702e34440c96ae65d3cdf3f5f63a08b977ac1bc0
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/pwatmconfigurationdata.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/pwatmconfigurationdata.go
new file mode 100644
index 0000000..0cd5ec4
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/pwatmconfigurationdata.go
@@ -0,0 +1,265 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// PwAtmConfigurationDataClassID is the 16-bit ID for the OMCI
+// Managed entity PW ATM configuration data
+const PwAtmConfigurationDataClassID = ClassID(337) // 0x0151
+
+var pwatmconfigurationdataBME *ManagedEntityDefinition
+
+// PwAtmConfigurationData (Class ID: #337 / 0x0151)
+// This ME contains generic configuration data for an ATM pseudowire. Definitions of attributes are
+// from PW-ATM-MIB [IETF RFC 5605]. Instances of this ME are created and deleted by the OLT.
+//
+// Relationships
+// An instance of this ME is associated with an instance of the MPLS pseudowire TP ME with a
+// pseudowire type attribute equal to one of the following.//// 2 ATM AAL5 SDU VCC transport//// 3 ATM transparent cell transport//// 9 ATM n-to-one VCC cell transport//// 10 ATM n-to-one VPC cell transport//// 12 ATM one-to-one VCC cell mode//// 13 ATM one-to-one VPC cell mode//// 14 ATM AAL5 PDU VCC transport//// Alternatively, an instance of this ME may be associated with an Ethernet flow TP or a TCP/UDP
+// config data ME, depending on the transport layer of the pseudowire.
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies each instance of this ME. (R, setbycreate)-(mandatory) (2
+// bytes)
+//
+// Tp Type
+// This attribute specifies the type of the underlying transport layer. (R, W, setbycreate)
+// (mandatory) (1 byte)
+//
+// 0 MPLS pseudowire termination point
+//
+// 1 Ethernet flow termination point
+//
+// 2 TCP/UDP config data
+//
+// Transport Tp Pointer
+// This attribute points to an associated instance of the transport layer TP, whose type is
+// specified by the TP type attribute. (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Pptp Atm Uni Pointer
+// This attribute points to an associated instance of the ITU-T G.983.2 PPTP ATM UNI. Refer to
+// [ITUT G.983.2] for the definition of the target ME. (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Max C Ell C Oncatenation
+// Max cell concatenation: This attribute specifies the maximum number of ATM cells that can be
+// concatenated into one PW packet in the upstream direction. (R, W, setbycreate) (mandatory) (2
+// bytes)
+//
+// Far End M Ax C Ell C Oncatenation
+// Far-end max cell concatenation: This attribute specifies the maximum number of ATM cells that
+// can be concatenated into one PW packet as provisioned at the far end. This attribute may be used
+// for error checking of downstream traffic. The value 0 specifies that the ONU uses its internal
+// default. (R, W, set-by-create) (optional) (2 bytes)
+//
+// Atm Cell Loss Priority Clp Qos Mapping
+// ATM cell loss priority (CLP) QoS mapping: This attribute specifies whether the CLP bits should
+// be considered when setting the value in the QoS fields of the encapsulating protocol (e.g., TC
+// fields of the MPLS label stack).
+//
+// 1 ATM CLP bits mapping to QoS fields of the encapsulating protocol
+//
+// 2 Not applicable
+//
+// The value 0 specifies that the ONU uses its internal default. (R, W, setbycreate) (optional) (1
+// byte)
+//
+// Timeout Mode
+// The value 0 specifies that the ONU uses its internal default. (R, W, setbycreate) (optional) (1
+// byte)
+//
+// This attribute specifies whether a packet is transmitted in the upstream direction based on
+// timeout expiration for collecting cells. The actual handling of the timeout is implementation
+// specific; as such, this attribute may be changed at any time with proper consideration of the
+// traffic disruption effect.
+//
+// 1 Disabled. The ONU does not generate packets based on timeout cells.
+//
+// 2 Enabled. The ONU generates packets based on timeout cells.
+//
+// Pw Atm Mapping Table
+// 12 ATM one-to-one VCC cell mode
+//
+// 13 ATM one-to-one VPC cell mode
+//
+// 14 ATM AAL5 PDU VCC transport
+//
+// Each entry contains:
+//
+// Entry number: (1-byte), the index of this row. A set operation with all fields zero has the
+// effect of clearing the table. A set operation with a non-zero entry number and all other fields
+// zero, has the effect of deleting one row.
+//
+// Upstream VPI: (2 bytes)
+//
+// The VPI value of this ATM PW at the UNI. When pseudowire type-= ATM transparent cell transport
+// (3), this field is ignored.
+//
+// Upstream VCI: (2 bytes)
+//
+// The VCI value of this ATM PW at the UNI. When pseudowire type-= ATM transparent cell transport
+// (3), or in virtual path (VP) cases, this field is ignored.
+//
+// Upstream traffic descriptor profile pointer: (2 bytes)
+//
+// A pointer to an instance of an ITU-T G.983.2 traffic descriptor profile ME that contains the
+// traffic parameters used for the ATM upstream traffic. Refer to clause 7.5.2 of [ITUT-G.983.2]
+// for the definition of this class of MEs. A null pointer indicates BE.
+//
+// Upstream mapped VPI: (2 bytes)
+//
+// The VPI value of the upstream MPLS ATM PW. This field is valid when the pseudowire type is as
+// follows.
+//
+// 9 ATM n-to-one VCC cell transport
+//
+// 10 ATM n-to-one VPC cell transport
+//
+// 12 ATM one-to-one VCC cell mode
+//
+// 13 ATM one-to-one VPC cell mode
+//
+// This field is not used for other pseudowire types.
+//
+// Upstream mapped VCI: (2 bytes)
+//
+// The VCI value of the upstream MPLS ATM PW. This field is valid when the pseudowire type is as
+// follows.
+//
+// 9 ATM n-to-one VCC cell transport
+//
+// 10 ATM n-to-one VPC cell transport
+//
+// 12 ATM one-to-one VCC cell mode
+//
+// 13 ATM one-to-one VPC cell mode
+//
+// This field is not used for other pseudowire types.
+//
+// Downstream VPI: (2 bytes)
+//
+// The downstream VPI value of this MPLS ATM PW. When pseudowire type-= ATM transparent cell
+// transport (3), this field is ignored.
+//
+// Downstream VCI: (2 bytes)
+//
+// The downstream VCI value of this MPLS ATM PW. When pseudowire type-= ATM transparent cell
+// transport (3) or in the VP case, this field is ignored.
+//
+// Downstream traffic descriptor profile pointer: (2 bytes)
+//
+// A pointer to an instance of an ITU-T G.983.2 traffic descriptor profile ME that contains the
+// traffic parameters used for the ATM downstream traffic. Refer to clause 7.5.2 of [ITUT-G.983.2]
+// for definition of this class of MEs. A null pointer indicates BE.
+//
+// Downstream mapped VPI: (2 bytes)
+//
+// The VPI value of this ATM PW at the UNI. This field is valid when the pseudowire type is as
+// follows.
+//
+// 9 ATM n-to-one VCC cell transport
+//
+// 10 ATM n-to-one VPC cell transport
+//
+// 12 ATM one-to-one VCC cell mode
+//
+// 13 ATM one-to-one VPC cell mode
+//
+// This field is not used for other pseudowire types.
+//
+// Downstream mapped VCI: (2 bytes)
+//
+// The VCI value of this ATM PW at the UNI. This field is valid when the pseudowire type is as
+// follows.
+//
+// 9 ATM n-to-one VCC cell transport
+//
+// 10 ATM n-to-one VPC cell transport
+//
+// 12 ATM one-to-one VCC cell mode
+//
+// 13 ATM one-to-one VPC cell mode
+//
+// This field is not used for other pseudowire types.
+//
+// (R,-W) (mandatory) (21N bytes, where N is the number of entries in the list)
+//
+// This attribute lists ATM VPI/VCI mapping entries in both the upstream and downstream directions.
+// In the upstream direction, ATM cells that match no entry's upstream VPI (and conditionally VCI)
+// values are discarded; conversely in the downstream direction. Upon ME instantiation, the ONU
+// sets this attribute to an empty table, which discards all cells in both directions.
+//
+// The table can contain up to N entries when the pseudowire type is equal to one of the following:
+//
+// 9 ATM n-to-one VCC cell transport
+//
+// 10 ATM n-to-one VPC cell transport
+//
+// The table contains only one entry when the pseudowire type is equal to one of the following.
+//
+// 2 ATM AAL5 SDU VCC transport
+//
+// 3 ATM transparent cell transport
+//
+type PwAtmConfigurationData struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ pwatmconfigurationdataBME = &ManagedEntityDefinition{
+ Name: "PwAtmConfigurationData",
+ ClassID: 337,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ GetNext,
+ Set,
+ SetTable,
+ ),
+ AllowedAttributeMask: 0xff00,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: ByteField("TpType", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+ 2: Uint16Field("TransportTpPointer", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+ 3: Uint16Field("PptpAtmUniPointer", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
+ 4: Uint16Field("MaxCEllCOncatenation", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
+ 5: Uint16Field("FarEndMAxCEllCOncatenation", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5),
+ 6: ByteField("AtmCellLossPriorityClpQosMapping", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 6),
+ 7: ByteField("TimeoutMode", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 7),
+ 8: TableField("PwAtmMappingTable", TableAttributeType, 0x0100, TableInfo{nil, 21}, mapset.NewSetWith(Read, Write), false, false, false, 8),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewPwAtmConfigurationData (class ID 337) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewPwAtmConfigurationData(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*pwatmconfigurationdataBME, params...)
+}