diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/trafficdescriptor.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/trafficdescriptor.go
new file mode 100644
index 0000000..cf1ccc0
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/trafficdescriptor.go
@@ -0,0 +1,190 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// TrafficDescriptorClassID is the 16-bit ID for the OMCI
+// Managed entity Traffic descriptor
+const TrafficDescriptorClassID = ClassID(280) // 0x0118
+
+var trafficdescriptorBME *ManagedEntityDefinition
+
+// TrafficDescriptor (Class ID: #280 / 0x0118)
+//	The traffic descriptor is a profile that allows for traffic management. A priority controlled
+//	ONU can point from a MAC bridge port configuration data ME to a traffic descriptor in order to
+//	implement traffic management (marking, policing). A rate controlled ONU can point to a traffic
+//	descriptor from either a MAC bridge port configuration data ME or a GEM port network CTP to
+//	implement traffic management (marking, shaping).
+//
+//	Packets are determined to be green, yellow or red as a function of the ingress packet rate and
+//	the settings in this ME. The colour indicates drop precedence (eligibility), subsequently used
+//	by the priority queue ME to drop packets conditionally during congestion conditions. Packet
+//	colour is also used by the optional mode 1 DBA status reporting function described in [ITUT
+//	G.984.3]. Red packets are dropped immediately. Yellow packets are marked as drop eligible, and
+//	green packets are marked as not drop eligible, according to the egress colour marking attribute.
+//
+//	The algorithm used to determine the colour marking is specified by the meter type attribute. If
+//	[bIETF RFC 4115] is used, then:
+//
+//	CIR4115-=-CIR
+//
+//	EIR4115-=-PIR - CIR (EIR: excess information rate)
+//
+//	CBS4115-=-CBS
+//
+//	EBS4115-=-PBS - CBS.
+//
+//	Relationships
+//		This ME is associated with a GEM port network CTP or a MAC bridge port configuration data ME.
+//
+//	Attributes
+//		Managed Entity Id
+//			This attribute uniquely identifies each instance of this ME. (R, setbycreate) (mandatory)
+//			(2-bytes)
+//
+//		Cir
+//			This attribute specifies the committed information rate, in bytes per second. The default is 0.
+//			(R,-W, setbycreate) (optional) (4-bytes)
+//
+//		Pir
+//			This attribute specifies the peak information rate, in bytes per second. The default value 0
+//			accepts the ONU's factory policy. (R,-W, setbycreate) (optional) (4-bytes)
+//
+//		Cbs
+//			This attribute specifies the committed burst size, in bytes. The default is 0. (R,-W,
+//			setbycreate) (optional) (4-bytes)
+//
+//		Pbs
+//			This attribute specifies the peak burst size, in bytes. The default value 0 accepts the ONU's
+//			factory policy. (R,-W, setbycreate) (optional) (4-bytes)
+//
+//		Colour Mode
+//			This attribute specifies whether the colour marking algorithm considers pre-existing marking on
+//			ingress packets (colour-aware) or ignores it (colour-blind). In colour-aware mode, packets can
+//			only be demoted (from green to yellow or red, or from yellow to red). The default value is 0.
+//
+//			0	Colour-blind
+//
+//			1	Colour-aware
+//
+//			(R,-W, setbycreate) (optional) (1-byte)
+//
+//		Ingress Colour Marking
+//			This attribute is meaningful in colour-aware mode. It identifies how pre-existing drop
+//			precedence is marked on ingress packets. For DEI and PCP marking, a drop eligible indicator is
+//			equivalent to yellow; otherwise, the colour is green. For DSCP AF marking, the lowest drop
+//			precedence is equivalent to green; otherwise, the colour is yellow. The default value is 0.
+//
+//			0	No marking (ignore ingress marking)
+//
+//			2	DEI [IEEE 802.1ad]
+//
+//			3	PCP 8P0D [IEEE 802.1ad]
+//
+//			4	PCP 7P1D [IEEE 802.1ad]
+//
+//			5	PCP 6P2D [IEEE 802.1ad]
+//
+//			6	PCP 5P3D [IEEE 802.1ad]
+//
+//			7	DSCP AF class [IETF RFC 2597]
+//
+//			(R,-W, setbycreate) (optional) (1-byte)
+//
+//		Egress Colour Marking
+//			2	DEI [IEEE 802.1ad]
+//
+//			3	PCP 8P0D [IEEE 802.1ad]
+//
+//			4	PCP 7P1D [IEEE 802.1ad]
+//
+//			5	PCP 6P2D [IEEE 802.1ad]
+//
+//			6	PCP 5P3D [IEEE 802.1ad]
+//
+//			7	DSCP AF class [IETF RFC 2597]
+//
+//			(R,-W, setbycreate) (optional) (1-byte)
+//
+//			This attribute specifies how drop precedence is to be marked by the ONU on egress packets. If
+//			set to internal marking only, the externally visible packet contents are not modified, but the
+//			packet is identified in a vendor-specific local way that indicates its colour to the priority
+//			queue ME. It is possible for the egress marking to differ from the ingress marking; for example,
+//			ingress PCP marking could be translated to DEI egress marking. The default value is 0.
+//
+//			0	No marking
+//
+//			1	Internal marking only
+//
+//		Meter Type
+//			This attribute specifies the algorithm used to determine the colour of the packet. The default
+//			value is 0.
+//
+//			0	Not specified
+//
+//			1	[b-IETF RFC 4115]
+//
+//			2	[b-IETF RFC 2698]
+//
+//			(R, setbycreate) (optional) (1-byte)
+//
+type TrafficDescriptor struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	trafficdescriptorBME = &ManagedEntityDefinition{
+		Name:    "TrafficDescriptor",
+		ClassID: 280,
+		MessageTypes: mapset.NewSetWith(
+			Create,
+			Delete,
+			Get,
+			Set,
+		),
+		AllowedAttributeMask: 0xff00,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+			1: Uint32Field("Cir", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 1),
+			2: Uint32Field("Pir", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 2),
+			3: Uint32Field("Cbs", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 3),
+			4: Uint32Field("Pbs", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 4),
+			5: ByteField("ColourMode", EnumerationAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5),
+			6: ByteField("IngressColourMarking", EnumerationAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 6),
+			7: ByteField("EgressColourMarking", EnumerationAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 7),
+			8: ByteField("MeterType", EnumerationAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate), false, true, false, 8),
+		},
+		Access:  CreatedByOlt,
+		Support: UnknownSupport,
+	}
+}
+
+// NewTrafficDescriptor (class ID 280) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewTrafficDescriptor(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*trafficdescriptorBME, params...)
+}