[VOL-4397] Updating omci-lib-go to 2.1.2
Change-Id: I702e34440c96ae65d3cdf3f5f63a08b977ac1bc0
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/vlantaggingoperationconfigurationdata.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/vlantaggingoperationconfigurationdata.go
new file mode 100644
index 0000000..b13a398
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/vlantaggingoperationconfigurationdata.go
@@ -0,0 +1,174 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// VlanTaggingOperationConfigurationDataClassID is the 16-bit ID for the OMCI
+// Managed entity VLAN tagging operation configuration data
+const VlanTaggingOperationConfigurationDataClassID = ClassID(78) // 0x004e
+
+var vlantaggingoperationconfigurationdataBME *ManagedEntityDefinition
+
+// VlanTaggingOperationConfigurationData (Class ID: #78 / 0x004e)
+// This ME organizes data associated with VLAN tagging. Instances of this ME are created and
+// deleted by the OLT.
+//
+// NOTE 1 - The extended VLAN tagging operation configuration data of clause 9.3.13 is preferred
+// for new implementations.
+//
+// Relationships
+// Zero or one instance of this ME may exist for an instance of any ME that can terminate or modify
+// an Ethernet stream.//// When this ME is associated with a UNI-side TP, it performs its upstream classification and
+// tagging operations before offering the upstream frame to other filtering, bridging or switching
+// functions. In the downstream direction, the defined inverse operation is the last operation
+// performed on the frame before offering it to the UNI-side termination.//// When this ME is associated with an ANI-side TP, it performs its upstream classification and
+// tagging operations as the last step before queueing for transmission to the OLT, after having
+// received the upstream frame from other filtering, bridging or switching functions. In the
+// downstream direction, the defined inverse operation is the first operation performed on the
+// frame before offering it to possible filter, bridge or switch functions.
+//
+// Attributes
+// Managed Entity Id
+// This attribute uniquely identifies each instance of this ME. When the optional association type
+// attribute is 0 or undefined, this attribute's value is the same as the ID of the ME with which
+// this VLAN tagging operation configuration data instance is associated, which may be either a
+// PPTP Ethernet UNI or an IP host config data or an IPv6 host config data ME. Otherwise, the value
+// of the ME ID is unconstrained except by the need to be unique. (R, set-by-create) (mandatory) (2
+// bytes)
+//
+// Upstream Vlan Tagging Operation Mode
+// This attribute controls upstream VLAN tagging. Valid values are as follows.
+//
+// 0 Upstream frame is sent as is, regardless of tag.
+//
+// 1 The upstream frame is tagged, whether or not the received frame was tagged. A tagged frame's
+// TCI is overwritten with the upstream VLAN tag TCI value. An untagged frame is prepended with a
+// tag whose values are taken from the upstream VLAN tag TCI value attribute.
+//
+// 2 A tag is prepended to the upstream frame, whether or not the received frame was tagged. If the
+// received frame is tagged, a second tag (Q-in-Q) is added to the frame. If the received frame is
+// not tagged, a tag is attached to the frame. The added tag is defined by the upstream VLAN tag
+// TCI value attribute.
+//
+// (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// Upstream Vlan Tag Tci Value
+// This attribute specifies the TCI for upstream VLAN tagging. It is used when the upstream VLAN
+// tagging operation mode is 1 or 2. (R,-W, setbycreate) (mandatory) (2-bytes)
+//
+// Downstream Vlan Tagging Operation Mode
+// This attribute controls downstream VLAN tagging. Valid values are as follows.
+//
+// 0 Downstream frame is sent as is, regardless of tag.
+//
+// 1 If the received frame is tagged, the outer tag is stripped. An untagged frame is forwarded
+// unchanged.
+//
+// (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// Association Type
+// This attribute specifies the type of ME that is associated with this VLAN tagging operation
+// configuration data ME. Values are assigned in accordance with the following list.
+//
+// 0 (Default) Physical path termination point Ethernet UNI (for backward compatibility, may also
+// be an IP host config data ME; they must not have the same ME ID). The associated ME instance is
+// implicit; its identifier is the same as that of this VLAN tagging operation configuration data.
+//
+// 1 IP host config data or IPv6 host config data
+//
+// 2 IEEE 802.1p mapper service profile
+//
+// 3 MAC bridge port configuration data
+//
+// 4 Physical path termination point xDSL UNI
+//
+// 5 GEM IW termination point
+//
+// 6 Multicast GEM IW termination point
+//
+// 7 Physical path termination point MoCA UNI
+//
+// 8 Reserved
+//
+// 9 Ethernet flow termination point
+//
+// 10 Physical path termination point Ethernet UNI
+//
+// 11 Virtual Ethernet interface point
+//
+// 12 MPLS pseudowire termination point
+//
+// 13 EFM bonding group
+//
+// The associated ME instance is identified by the associated ME pointer. (R,-W, setbycreate)
+// (optional) (1-byte)
+//
+// Associated Me Pointer
+// When the association type attribute is non-zero, this attribute points to the ME with which this
+// VLAN tagging operation configuration data ME is associated. Otherwise, this attribute is
+// undefined, and the association is implicit through the ME ID. (R,-W, setbycreate) (optional)
+// (2-bytes)
+//
+// NOTE 2 - Implicit association is retained for legacy compatibility. Explicit pointers are
+// preferred for new implementations.
+//
+// NOTE 3 - When the association type is xDSL, the two MSBs may be used to indicate a bearer
+// channel.
+//
+type VlanTaggingOperationConfigurationData struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ vlantaggingoperationconfigurationdataBME = &ManagedEntityDefinition{
+ Name: "VlanTaggingOperationConfigurationData",
+ ClassID: 78,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xf800,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: ByteField("UpstreamVlanTaggingOperationMode", EnumerationAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+ 2: Uint16Field("UpstreamVlanTagTciValue", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+ 3: ByteField("DownstreamVlanTaggingOperationMode", EnumerationAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
+ 4: ByteField("AssociationType", EnumerationAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 4),
+ 5: Uint16Field("AssociatedMePointer", PointerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewVlanTaggingOperationConfigurationData (class ID 78) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewVlanTaggingOperationConfigurationData(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*vlantaggingoperationconfigurationdataBME, params...)
+}