[VOL-4397] Updating omci-lib-go to 2.1.2
Change-Id: I702e34440c96ae65d3cdf3f5f63a08b977ac1bc0
diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/voipapplicationserviceprofile.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/voipapplicationserviceprofile.go
new file mode 100644
index 0000000..2eb1fec
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/voipapplicationserviceprofile.go
@@ -0,0 +1,206 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// VoipApplicationServiceProfileClassID is the 16-bit ID for the OMCI
+// Managed entity VoIP application service profile
+const VoipApplicationServiceProfileClassID = ClassID(146) // 0x0092
+
+var voipapplicationserviceprofileBME *ManagedEntityDefinition
+
+// VoipApplicationServiceProfile (Class ID: #146 / 0x0092)
+// The VoIP application service profile defines attributes of calling features used in conjunction
+// with a VoIP line service. It is optional for ONUs that support VoIP services. If a non-OMCI
+// interface is used to manage SIP for VoIP, this ME is unnecessary.
+//
+// An instance of this ME is created and deleted by the OLT. A VoIP application service profile
+// instance is needed for each unique set of profile attributes.
+//
+// Relationships
+// An instance of this ME is associated with zero or more SIP user data MEs.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID:-This attribute uniquely identifies each instance of this ME. (R,-setbycreate)
+// (mandatory) (2 bytes)
+//
+// Cid Features
+// This attribute contains a bit map of caller ID features. Except as noted, the bit value 0
+// disables the feature; 1 enables it.
+//
+// 0x01 Calling number
+//
+// 0x02 Calling name
+//
+// 0x04 CID blocking (both number and name)
+//
+// 0x08 CID number - Permanent presentation status for number (0 = public, 1 = private)
+//
+// 0x10 CID name - Permanent presentation status for name (0 = public, 1 = private)
+//
+// 0x20 Anonymous CID blocking (ACR). It may not be possible to support this in the ONU.
+//
+// 0x40..0x80 Not used
+//
+// The recommended default value is 0x00. (R, W, setbycreate) (mandatory) (1-byte)
+//
+// Call Waiting Features
+// The recommended default value is 0x00. (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// This attribute contains a bit map of call waiting features. The bit value 0 disables the
+// feature; 1 enables it.
+//
+// 0x01 Call waiting
+//
+// 0x02 Caller ID announcement
+//
+// 0x04..0x80 Not used
+//
+// Call Progress Or Transfer Features
+// This attribute is a bit map of call processing features. The bit value 0 disables the feature; 1
+// enables it.
+//
+// 0x0001 3way
+//
+// 0x0002 Call transfer
+//
+// 0x0004 Call hold
+//
+// 0x0008 Call park
+//
+// 0x0010 Do not disturb
+//
+// 0x0020 Flash on emergency service call (flash is to be processed during an emergency service
+// call)
+//
+// 0x0040 Emergency service originating hold (determines whether call clearing is to be performed
+// on on-hook during an emergency service call)
+//
+// 0x0080 6way
+//
+// 0x0100..0x8000 Not used
+//
+// The recommended default value is 0x0000. (R, W, setbycreate) (mandatory) (2-bytes)
+//
+// Call Presentation Features
+// This attribute is a bit map of call presentation features. The bit value 0 disables the feature;
+// 1 enables it.
+//
+// 0x0001 Message waiting indication splash ring
+//
+// 0x0002 Message waiting indication special dial tone
+//
+// 0x0004 Message waiting indication visual indication
+//
+// 0x0008 Call forwarding indication
+//
+// 0x0010 DC voltage based visual message waiting indicator (vmwi) (e.g., neon lamp on a phone to
+// indicate a message waiting). For backwards compatibility reasons, the value 0x0010 is a
+// companion value to 0x0004. If an ONU does not support DC voltage vmwi, the ONU uses other
+// existing vmwi methods. If the ONU supports DC voltage vmwi and needs to apply DC voltage to turn
+// on the phone lamp (to indicate message waiting), the values 0x0004 and 0x0010 are set.
+//
+// 0x0020..0x8000 Not used
+//
+// The recommended default value is 0x0000. (R,-W, setbycreate) (mandatory) (2-bytes)
+//
+// Direct Connect Feature
+// This attribute is a bit map of characteristics associated with the direct connect feature. The
+// bit value 0 disables the feature; 1 enables it.
+//
+// 0x01 Direct connect feature enabled
+//
+// 0x02 Dial tone feature delay option
+//
+// The recommended default value is 0x00. (R, W, setbycreate) (mandatory) (1-byte)
+//
+// Direct Connect Uri Pointer
+// This attribute points to a network address ME that specifies the URI of the direct connect. If
+// this attribute is set to a null pointer, no URI is defined. (R, W, setbycreate) (mandatory) (2
+// bytes)
+//
+// Bridged Line Agent Uri Pointer
+// This attribute points to a network address ME that specifies the URI of the bridged line agent.
+// If this attribute is set to a null pointer, no URI is defined. (R, W, setbycreate) (mandatory)
+// (2 bytes)
+//
+// Conference Factory Uri Pointer
+// This attribute points to a network address ME that specifies the URI of the conference factory.
+// If this attribute is set to a null pointer, no URI is defined. (R, W, setbycreate) (mandatory)
+// (2 bytes)
+//
+// Dial Tone Feature Delay_Warmline Timer New
+// Dial tone feature delay/warmline timer (new): This attribute defines the warmline timer/dial
+// tone feature delay timer (seconds). The default value 0 specifies vendor-specific
+// implementation. (R, W) (optional) (2 bytes)
+//
+// Ip Host Pointer
+// This attribute points to the IP host config data or IPv6 host config data ME associated with
+// this VoIP config data ME. This attribute is only relevant when the VoIP configuration method
+// used attribute of this ME is set to configuration file retrieval (2) OR IETF sipping config
+// framework (4). Upon instantiation ONU sets this value to NULL (0xFFFF) pointer. (R, W)
+// (optional) (2 bytes)
+//
+type VoipApplicationServiceProfile struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ voipapplicationserviceprofileBME = &ManagedEntityDefinition{
+ Name: "VoipApplicationServiceProfile",
+ ClassID: 146,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xffc0,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: ByteField("CidFeatures", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+ 2: ByteField("CallWaitingFeatures", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+ 3: Uint16Field("CallProgressOrTransferFeatures", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
+ 4: Uint16Field("CallPresentationFeatures", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
+ 5: ByteField("DirectConnectFeature", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
+ 6: Uint16Field("DirectConnectUriPointer", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 6),
+ 7: Uint16Field("BridgedLineAgentUriPointer", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7),
+ 8: Uint16Field("ConferenceFactoryUriPointer", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 8),
+ 9: Uint16Field("DialToneFeatureDelayWarmlineTimerNew", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, true, false, 9),
+ 10: Uint16Field("IpHostPointer", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, true, false, 10),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewVoipApplicationServiceProfile (class ID 146) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewVoipApplicationServiceProfile(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*voipapplicationserviceprofileBME, params...)
+}