diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/xdsllineconfigurationprofilepart2.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/xdsllineconfigurationprofilepart2.go
new file mode 100644
index 0000000..dfdd42c
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/xdsllineconfigurationprofilepart2.go
@@ -0,0 +1,189 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// XdslLineConfigurationProfilePart2ClassID is the 16-bit ID for the OMCI
+// Managed entity xDSL line configuration profile part 2
+const XdslLineConfigurationProfilePart2ClassID = ClassID(105) // 0x0069
+
+var xdsllineconfigurationprofilepart2BME *ManagedEntityDefinition
+
+// XdslLineConfigurationProfilePart2 (Class ID: #105 / 0x0069)
+//	The overall xDSL line configuration profile is modelled in several parts, all of which are
+//	associated together through a common ME ID (the client PPTP xDSL UNI part 1 has a single
+//	pointer, which refers to the entire set of line configuration profile parts).
+//
+//	Relationships
+//		An instance of this ME may be associated with zero or more instances of an xDSL UNI.
+//
+//	Attributes
+//		Managed Entity Id
+//			This attribute uniquely identifies each instance of this ME. All xDSL and VDSL2 line
+//			configuration profiles and extensions that pertain to a given PPTP xDSL UNI must share a common
+//			ME ID. (R, setbycreate) (mandatory) (2-bytes)
+//
+//		Downstream Minimum Time Interval For Upshift Rate Adaptation
+//			This parameter defines the interval during which the downstream noise margin must remain above
+//			the downstream upshift noise margin before the xTU-R attempts to increase the downstream net
+//			data rate. Its value ranges from 0 to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
+//
+//		Upstream Minimum Time Interval For Upshift Rate Adaptation
+//			This parameter defines the interval during which the upstream noise margin must remain above the
+//			upstream upshift noise margin before the xTU-C attempts to increase the upstream net data rate.
+//			Its value ranges from 0 to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
+//
+//		Downstream Downshift Noise Margin
+//			If the downstream noise margin is below the downstream downshift noise margin and remains there
+//			for more than the downstream minimum time interval for downshift rate adaptation, the xTU-R
+//			attempts to decrease the downstream net data rate. This attribute's value ranges from 0 (0.0 dB)
+//			to 310 (31.0 dB). (R,-W, setbycreate) (optional) (2-bytes)
+//
+//		Upstream Downshift Noise Margin
+//			If the upstream noise margin is below the upstream downshift noise margin and remains there for
+//			more than the upstream minimum time interval for downshift rate adaptation, the xTUC attempts to
+//			decrease the upstream net data rate. This attribute's value ranges from 0 (0.0 dB) to 310 (31.0
+//			dB). (R,-W, setbycreate) (optional) (2-bytes)
+//
+//		Downstream Minimum Time Interval For Downshift Rate Adaptation
+//			This parameter defines the interval during which the downstream noise margin must remain below
+//			the downstream downshift noise margin before the xTU-R attempts to decrease the downstream net
+//			data rate. Its value ranges from 0 to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
+//
+//		Upstream Minimum Time Interval For Downshift Rate Adaptation
+//			This parameter defines the interval during which the upstream noise margin must remain below the
+//			upstream downshift noise margin before the xTU-C attempts to decrease the upstream net data
+//			rate. Its value ranges from 0 to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
+//
+//		Xtu Impedance State Forced
+//			This parameter forces the impedance state of the xTU-C. It applies only to the T/S interface,
+//			and is deprecated in the OMCI, which stands proxy for the Q interface. It is only valid for
+//			Annex A of [ITUT G.992.3], Annex A of [ITUT G.992.4] and Annex A of [ITUT G.992.5]. It is
+//			defined as follows.
+//
+//			1	Force the xTU-C to the disabled state.
+//
+//			2	Force the xTU-C to the inactive state.
+//
+//			3	Force the xTU-C to the active state.
+//
+//			(R,-W, setbycreate) (optional) (1-byte)
+//
+//		L0_Time
+//			L0-time:	This parameter specifies the minimum time between an exit from the L2 state and the
+//			next entry into the L2 state. It is only valid for [ITUT-G.992.3], [ITUT-G.992.4] and
+//			[ITUT-G.992.5]. It ranges from 0 to 255-s. (R,-W, setbycreate) (mandatory) (1 byte)
+//
+//		L2_Time
+//			L2-time:	This parameter specifies the minimum time between an entry into the L2 state and the
+//			first power trim in the L2 state, or between two consecutive power trims in the L2 state. It is
+//			only valid for [ITUT-G.992.3], [ITUT-G.992.4] and [ITUT-G.992.5]. It ranges from 0 to 255-s. (R,
+//			W, setbycreate) (mandatory) (1 byte)
+//
+//		Downstream Maximum Nominal Power Spectral Density
+//			This attribute specifies the maximum nominal transmit PSD in the downstream direction during
+//			initialization and showtime. A single MAXNOMPSDds attribute is defined per mode enabled in the
+//			xTSE line configuration attribute. It is only valid for [ITUT-G.992.3], [ITUT-G.992.4] and
+//			[ITUT-G.992.5]. Its value ranges from 0 (60.0-dBm/Hz) to 300 (-30-dBm/Hz). (R, W, setbycreate)
+//			(mandatory) (2 bytes)
+//
+//		Upstream Maximum Nominal Power Spectral Density
+//			This attribute specifies the maximum nominal transmit PSD in the upstream direction during
+//			initialization and showtime. A single MAXNOMPSDus attribute is defined per mode enabled in the
+//			xTSE line configuration attribute. It is only valid for [ITUT-G.992.3], [ITUT-G.992.4] and
+//			[ITUT-G.993.2]. Its value ranges from 0 (-60.0-dBm/Hz) to 300 (-30-dBm/Hz). (R, W, setbycreate)
+//			(mandatory) (2 bytes)
+//
+//		Downstream Maximum Nominal Aggregate Transmit Power
+//			This attribute specifies the maximum nominal aggregate transmit power in the downstream
+//			direction during initialization and showtime. It is only valid for [ITUT-G.992.3],
+//			[ITUT-G.992.4], [ITUT-G.992.5] and [ITUT-G.993.2]. Its value ranges from 0 (0.0-dBm) to 255
+//			(25.5-dBm). (R, W, setbycreate) (mandatory) (1-byte)
+//
+//		Upstream Maximum Nominal Aggregate Transmit Power
+//			This parameter specifies the maximum nominal aggregate transmit power in the upstream direction
+//			during initialization and showtime. It is only valid for [ITUT-G.992.3], [ITUT-G.992.4] and
+//			[ITUT-G.992.5]. Its value ranges from 0 (0.0-dBm) to 255 (25.5-dBm). (R, W, setbycreate)
+//			(mandatory) (1 byte)
+//
+//		Upstream Maximum Aggregate_Receive Power
+//			Upstream maximum aggregate-receive power: This parameter specifies the maximum upstream
+//			aggregate receive power over a set of subcarriers, as defined in the relevant Recommendation.
+//			The xTU-C requests an upstream power cutback such that the upstream aggregate receive power over
+//			that set of subcarriers is at or below the configured maximum value. It is only valid for
+//			[ITUT-G.992.3], [ITUT-G.992.4] and [ITUT-G.992.5]. This attribute ranges from 0 (25.5-dBm) to
+//			510 (+25.5-dBm). The special value 0xFFFF indicates that no upstream maximum aggregate receive
+//			power limit is to be applied. (R, W setbycreate) (mandatory) (2 bytes)
+//
+//		Vdsl2 Transmission System Enabling
+//			This configuration attribute extends the transmission system coding types to be allowed by the
+//			xTU-C. It is a bit map, defined as octet 8 (bits 57..64) in Table-9.7.12-1. (R, W, setbycreate)
+//			(optional) (1 byte)
+//
+type XdslLineConfigurationProfilePart2 struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	xdsllineconfigurationprofilepart2BME = &ManagedEntityDefinition{
+		Name:    "XdslLineConfigurationProfilePart2",
+		ClassID: 105,
+		MessageTypes: mapset.NewSetWith(
+			Create,
+			Delete,
+			Get,
+			Set,
+		),
+		AllowedAttributeMask: 0xfffe,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+			1:  Uint16Field("DownstreamMinimumTimeIntervalForUpshiftRateAdaptation", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 1),
+			2:  Uint16Field("UpstreamMinimumTimeIntervalForUpshiftRateAdaptation", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 2),
+			3:  Uint16Field("DownstreamDownshiftNoiseMargin", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 3),
+			4:  Uint16Field("UpstreamDownshiftNoiseMargin", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 4),
+			5:  Uint16Field("DownstreamMinimumTimeIntervalForDownshiftRateAdaptation", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5),
+			6:  Uint16Field("UpstreamMinimumTimeIntervalForDownshiftRateAdaptation", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 6),
+			7:  ByteField("XtuImpedanceStateForced", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 7),
+			8:  ByteField("L0Time", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 8),
+			9:  ByteField("L2Time", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 9),
+			10: Uint16Field("DownstreamMaximumNominalPowerSpectralDensity", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 10),
+			11: Uint16Field("UpstreamMaximumNominalPowerSpectralDensity", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 11),
+			12: ByteField("DownstreamMaximumNominalAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 12),
+			13: ByteField("UpstreamMaximumNominalAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 13),
+			14: Uint16Field("UpstreamMaximumAggregateReceivePower", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 14),
+			15: ByteField("Vdsl2TransmissionSystemEnabling", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 15),
+		},
+		Access:  CreatedByOlt,
+		Support: UnknownSupport,
+	}
+}
+
+// NewXdslLineConfigurationProfilePart2 (class ID 105) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewXdslLineConfigurationProfilePart2(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*xdsllineconfigurationprofilepart2BME, params...)
+}