diff --git a/vendor/github.com/opencord/omci-lib-go/v2/generated/xdsllineinventoryandstatusdatapart1.go b/vendor/github.com/opencord/omci-lib-go/v2/generated/xdsllineinventoryandstatusdatapart1.go
new file mode 100644
index 0000000..92dbed6
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/v2/generated/xdsllineinventoryandstatusdatapart1.go
@@ -0,0 +1,206 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// XdslLineInventoryAndStatusDataPart1ClassID is the 16-bit ID for the OMCI
+// Managed entity xDSL line inventory and status data part 1
+const XdslLineInventoryAndStatusDataPart1ClassID = ClassID(100) // 0x0064
+
+var xdsllineinventoryandstatusdatapart1BME *ManagedEntityDefinition
+
+// XdslLineInventoryAndStatusDataPart1 (Class ID: #100 / 0x0064)
+//	This ME contains part 1 of the line inventory and status data for an xDSL UNI. The ONU
+//	automatically creates or deletes an instance of this ME upon the creation or deletion of a PPTP
+//	xDSL UNI part 1.
+//
+//	Relationships
+//		An instance of this ME is associated with an xDSL UNI.
+//
+//	Attributes
+//		Managed Entity Id
+//			This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is
+//			implicitly linked to an instance of the PPTP xDSL UNI part 1. (R) (mandatory) (2-bytes)
+//
+//		Xtu_C G.994.1 Vendor Id
+//			xTU-C G.994.1 vendor ID: This is the vendor ID as inserted by the xTU-C in the ITUT-G.994.1 CL
+//			message. It comprises 8 octets, including a country code followed by a (regionally allocated)
+//			provider code, as defined in [ITUT-T.35]. (R) (mandatory) (8-bytes)
+//
+//		Xtu_R G.994.1 Vendor Id
+//			xTU-R G.994.1 vendor ID: This is the vendor ID as inserted by the xTU-R in the ITUT-G.994.1 CLR
+//			message. It comprises 8 binary octets, with the same format as the xTUC ITUT G.994.1 vendor ID.
+//			(R) (mandatory) (8-bytes)
+//
+//		Xtu_C System Vendor Id
+//			xTU-C system vendor ID: This is the vendor ID as inserted by the xTU-C in the overhead messages
+//			of [ITU-T G.992.3] and [ITU-T G.992.4]. It comprises 8 binary octets, with the same format as
+//			the xTU-C ITUT-G.994.1 vendor ID. (R) (mandatory) (8-bytes)
+//
+//		Xtu_R System Vendor Id
+//			xTU-R system vendor ID: This is the vendor ID as inserted by the xTU-R in the embedded
+//			operations channel and overhead messages of [ITU-T G.992.3] and [ITUT-G.992.4]. It comprises 8
+//			binary octets, with the same format as the xTU-C ITUT-G.994.1 vendor ID. (R) (mandatory)
+//			(8-bytes)
+//
+//		Xtu_C Version Number
+//			xTU-C version number: This is the vendorspecific version number as inserted by the xTUC in the
+//			overhead messages of [ITU-T G.992.3] and [ITU-T G.992.4]. It comprises up to 16 binary octets.
+//			(R) (mandatory) (16-bytes)
+//
+//		Xtu_R Version Number
+//			xTU-R version number: This is the version number as inserted by the xTUR in the embedded
+//			operations channel of [ITU-T G.992.1] or [ITU-T G.992.2], or the overhead messages of [ITU-T
+//			G.992.3], [ITU-T G.992.4], [ITU-T G.992.5] and [ITU-T G.993.2]. The attribute value may be
+//			vendor-specific, but is recommended to comprise up to 16 ASCII characters, null-terminated if it
+//			is shorter than 16. The string should contain the xTU-R firmware version and the xTU-R model,
+//			encoded in that order and separated by a space character: "<xTU-R firmware version><xTU-R
+//			model>". It is recognized that legacy xTU-Rs may not support this format. (R) (mandatory)
+//			(16-bytes)
+//
+//		Xtu_C Serial Number Part 1
+//			xTU-C serial number part 1: The vendorspecific serial number inserted by the xTU-C in the
+//			overhead messages of [ITU-T G.992.3] and [ITU-T G.992.4] comprises up to 32 ASCII characters,
+//			null terminated if it is shorter than 32 characters. This attribute contains the first 16
+//			characters. (R) (mandatory) (16-bytes)
+//
+//		Xtu_C Serial Number Part 2
+//			xTU-C serial number part 2: This attribute contains the second 16 characters of the xTU-C serial
+//			number. (R) (mandatory) (16-bytes)
+//
+//		Xtu_R Serial Number Part 1
+//			xTU-R serial number part 1: The serial number inserted by the xTU-R in the embedded operations
+//			channel of [ITU-T G.992.1] or [ITU-T G.992.2], or the overhead messages of [ITU-T G.992.3],
+//			[ITU-T G.992.4], [ITU-T G.992.5] and [ITUT-G.993.2], comprises up to 32 ASCII characters,
+//			nullterminated if it is shorter than 32. It is recommended that the equipment serial number, the
+//			equipment model and the equipment firmware version, encoded in that order and separated by space
+//			characters, be contained: "<equipment serial number><equipment model><equipment firmware
+//			version>". It is recognized that legacy xTU-Rs may not support this format. This attribute
+//			contains the first 16 characters. (R) (mandatory) (16-bytes)
+//
+//		Xtu_R Serial Number Part 2
+//			xTU-R serial number part 2: This attribute contains the second 16 characters of the xTU-R serial
+//			number. (R) (mandatory) (16-bytes)
+//
+//		Xtu_C Self Test Results
+//			xTU-C selftest results: This parameter reports the xTU-C self-test result. It is coded in two
+//			fields. The most significant octet is 0 if the self-test passed and 1 if it failed. The three
+//			least significant octets are a vendor-discretionary integer that can be interpreted in
+//			combination with [ITU-T G.994.1] and the system vendor ID. (R) (mandatory) (4-bytes)
+//
+//		Xtu_R Self Test Results
+//			xTU-R selftest results: This parameter defines the xTU-R self-test result. It is coded in two
+//			fields. The most significant octet is 0 if the self-test passed and 1 if it failed. The three
+//			least significant octets are a vendor-discretionary integer that can be interpreted in
+//			combination with [ITU-T G.994.1] and the system vendor ID. (R) (mandatory) (4-bytes)
+//
+//		Xtu_C Transmission System Capability
+//			xTU-C transmission system capability: This attribute lists xTUC transmission system
+//			capabilities. It is a bit map, defined in Table 9.7.12-1. (R) (mandatory) (7-bytes)
+//
+//			NOTE 1 - This attribute is only 7-bytes long. An eighth byte identifying VDSL2 capabilities is
+//			defined in the VDSL2 line inventory and status data part 1 ME.
+//
+//		Xtu_R Transmission System Capability
+//			xTU-R transmission system capability: This attribute lists xTUR transmission system
+//			capabilities. It is a bit map, defined in Table 9.7.121. (R) (mandatory) (7-bytes)
+//
+//			NOTE 2 - This attribute is only 7-bytes long. An eighth byte identifying VDSL2 capabilities is
+//			defined in the VDSL2 line inventory and status data part 2 ME.
+//
+//		Initialization Success_Failure Cause
+//			(R) (mandatory) (1-byte)
+//
+//			Initialization success/failure cause: This parameter represents the success or failure cause of
+//			the last full initialization performed on the line. It is coded as follows.
+//
+//			0	Successful
+//
+//			1	Configuration error
+//
+//			This error occurs with inconsistencies in configuration parameters, e.g., when the line is
+//			initialized in an xDSL transmission system whose xTU does not support the configured maximum
+//			delay or the configured minimum or maximum data rate for one or more bearer channels.
+//
+//			2	Configuration not feasible on the line
+//
+//			This error occurs if the minimum data rate cannot be achieved on the line with the minimum noise
+//			margin, maximum PSD level, maximum delay and maximum bit error ratio for one or more bearer
+//			channels.
+//
+//			3	Communication problem
+//
+//			This error occurs, for example, due to corrupted messages, bad syntax messages, if no common
+//			mode can be selected in the ITUT-G.994.1 handshake procedure or due to a timeout.
+//
+//			4	No peer xTU detected
+//
+//			This error occurs if the peer xTU is not powered or not connected or if the line is too long to
+//			allow detection of a peer xTU.
+//
+//			5	Any other or unknown initialization failure cause.
+//
+type XdslLineInventoryAndStatusDataPart1 struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	xdsllineinventoryandstatusdatapart1BME = &ManagedEntityDefinition{
+		Name:    "XdslLineInventoryAndStatusDataPart1",
+		ClassID: 100,
+		MessageTypes: mapset.NewSetWith(
+			Get,
+		),
+		AllowedAttributeMask: 0xfffe,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+			1:  Uint64Field("XtuCG9941VendorId", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
+			2:  Uint64Field("XtuRG9941VendorId", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2),
+			3:  Uint64Field("XtuCSystemVendorId", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3),
+			4:  Uint64Field("XtuRSystemVendorId", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4),
+			5:  MultiByteField("XtuCVersionNumber", OctetsAttributeType, 0x0800, 16, toOctets("AAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read), false, false, false, 5),
+			6:  MultiByteField("XtuRVersionNumber", OctetsAttributeType, 0x0400, 16, toOctets("AAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read), false, false, false, 6),
+			7:  MultiByteField("XtuCSerialNumberPart1", OctetsAttributeType, 0x0200, 16, toOctets("AAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read), false, false, false, 7),
+			8:  MultiByteField("XtuCSerialNumberPart2", OctetsAttributeType, 0x0100, 16, toOctets("AAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read), false, false, false, 8),
+			9:  MultiByteField("XtuRSerialNumberPart1", OctetsAttributeType, 0x0080, 16, toOctets("AAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read), false, false, false, 9),
+			10: MultiByteField("XtuRSerialNumberPart2", OctetsAttributeType, 0x0040, 16, toOctets("AAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read), false, false, false, 10),
+			11: Uint32Field("XtuCSelfTestResults", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, false, false, 11),
+			12: Uint32Field("XtuRSelfTestResults", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, false, false, 12),
+			13: MultiByteField("XtuCTransmissionSystemCapability", OctetsAttributeType, 0x0008, 7, toOctets("AAAAAAAAAA=="), mapset.NewSetWith(Read), false, false, false, 13),
+			14: MultiByteField("XtuRTransmissionSystemCapability", OctetsAttributeType, 0x0004, 7, toOctets("AAAAAAAAAA=="), mapset.NewSetWith(Read), false, false, false, 14),
+			15: ByteField("InitializationSuccessFailureCause", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read), false, false, false, 15),
+		},
+		Access:  CreatedByOnu,
+		Support: UnknownSupport,
+	}
+}
+
+// NewXdslLineInventoryAndStatusDataPart1 (class ID 100) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewXdslLineInventoryAndStatusDataPart1(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*xdsllineinventoryandstatusdatapart1BME, params...)
+}