/*
 * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
 * Copyright 2020-present Open Networking Foundation

 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at

 * http://www.apache.org/licenses/LICENSE-2.0

 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
 * NOTE: This file was generated, manual edits will be overwritten!
 *
 * Generated by 'goCodeGenerator.py':
 *              https://github.com/cboling/OMCI-parser/README.md
 */

package generated

import "github.com/deckarep/golang-set"

// XdslXtuCPerformanceMonitoringHistoryDataClassID is the 16-bit ID for the OMCI
// Managed entity xDSL xTU-C performance monitoring history data
const XdslXtuCPerformanceMonitoringHistoryDataClassID = ClassID(112) // 0x0070

var xdslxtucperformancemonitoringhistorydataBME *ManagedEntityDefinition

// XdslXtuCPerformanceMonitoringHistoryData (Class ID: #112 / 0x0070)
//	This ME collects PM data on the xTUC to xTUR path as seen from the xTU-C. Instances of this ME
//	are created and deleted by the OLT.
//
//	For a complete discussion of generic PM architecture, refer to clause I.4.
//
//	Relationships
//		An instance of this ME is associated with an xDSL UNI.
//
//	Attributes
//		Managed Entity Id
//			This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is
//			implicitly linked to an instance of the PPTP xDSL UNI part 1. (R, setbycreate) (mandatory)
//			(2-bytes)
//
//		Interval End Time
//			This attribute identifies the most recently finished 15-min interval. (R) (mandatory) (1-byte)
//
//		Threshold Data 1_2 Id
//			Threshold data 1/2 ID: This attribute points to an instance of the threshold data 1 and 2 MEs
//			that contain PM threshold values. (R,-W, setbycreate) (mandatory) (2-bytes)
//
//		Loss Of Frame Seconds
//			(R) (mandatory) (2-bytes)
//
//		Loss Of Signal Seconds
//			(R) (mandatory) (2-bytes)
//
//		Loss Of Link Seconds
//			(R) (mandatory) (2-bytes)
//
//		Loss Of Power Seconds
//			(R) (mandatory) (2-bytes)
//
//		Errored Seconds Es
//			Errored seconds (ES): This attribute counts 1-s intervals with one or more CRC8 anomalies summed
//			over all received bearer channels, or one or more loss of signal (LOS) defects, or one or more
//			SEF defects, or one or more LPR defects. (R) (mandatory) (2-bytes)
//
//		Severely Errored Seconds
//			This attribute counts severely errored seconds (SES-L). An SES is declared if, during a 1-s
//			interval, there were 18 or more CRC8 anomalies in one or more of the received bearer channels,
//			or one or more LOS defects, or one or more SEF defects, or one or more LPR defects.
//
//			If the relevant Recommendation ([ITUT G.992.3], [ITUT G.992.5] or [ITUT G.993.2]) supports a 1-s
//			normalized CRC-8 anomaly counter increment, the 1-s SES counter follows this value instead of
//			counting CRC-8 anomalies directly.
//
//			If a common CRC is applied over multiple bearer channels, then each related CRC-8 anomaly is
//			counted only once for the whole set of bearer channels over which the CRC is applied.
//
//			(R) (mandatory) (2-bytes)
//
//		Line Initializations
//			This attribute counts the total number of full initializations attempted on the line, both
//			successful and failed. (R) (mandatory) (2-bytes)
//
//		Failed Line Initializations
//			This attribute counts the total number of failed full initializations during the accumulation
//			period. A failed full initialization occurs when showtime is not reached at the end of the full
//			initialization procedure. (R) (mandatory) (2-bytes)
//
//		Short Initializations
//			This attribute counts the total number of fast retrains or short initializations attempted on
//			the line, successful and failed. Fast retrain is defined in [ITUT G.992.2]. Short initialization
//			is defined in [ITUT-G.992.3] and [ITUT G.992.4]. (R) (optional) (2-bytes)
//
//		Failed Short Initializations
//			This attribute counts the total number of failed fast retrains or short initializations during
//			the accumulation period, e.g., when:
//
//			-	a CRC error is detected;
//
//			-	a timeout occurs;
//
//			-	a fast retrain profile is unknown.
//
//			(R) (optional) (2-bytes)
//
//		Fec Seconds
//			This attribute counts seconds during which there was an FEC anomaly. (R) (mandatory) (2-bytes)
//
//		Unavailable Seconds
//			This attribute counts 1-s intervals during which the xDSL UNI is unavailable. The line becomes
//			unavailable at the onset of 10 contiguous SES-Ls. The 10 SES-Ls are included in unavailable
//			time. Once unavailable, the line becomes available at the onset of 10-contiguous seconds that
//			are not severely errored. The 10-s with no SESLs are excluded from unavailable time. Some
//			attribute counts are inhibited during unavailability - see clause 7.2.7.13 of [ITUT G.997.1].
//			(R) (mandatory) (2-bytes)
//
//		Sos Success Count, Near End
//			The SOS-SUCCESS-NE attribute is a count of the total number of successful SOS procedures
//			initiated by the near-end xTU on the line during the accumulation period. Successful SOS is
//			defined in clause-12.1.4 of [ITUT G.993.2]. (R) (optional) (2-bytes)
//
//		Sos Success Count, Far End
//			The SOS-SUCCESS-FE attribute is a count of the total number of successful SOS procedures
//			initiated by the far-end xTU on the line during the accumulation period. Successful SOS is
//			defined in clause 12.1.4 of [ITUT-G.993.2]. (R) (optional) (2-bytes)
//
type XdslXtuCPerformanceMonitoringHistoryData struct {
	ManagedEntityDefinition
	Attributes AttributeValueMap
}

func init() {
	xdslxtucperformancemonitoringhistorydataBME = &ManagedEntityDefinition{
		Name:    "XdslXtuCPerformanceMonitoringHistoryData",
		ClassID: 112,
		MessageTypes: mapset.NewSetWith(
			Create,
			Delete,
			Get,
			Set,
			GetCurrentData,
		),
		AllowedAttributeMask: 0xffff,
		AttributeDefinitions: AttributeDefinitionMap{
			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
			1:  ByteField("IntervalEndTime", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
			2:  Uint16Field("ThresholdData12Id", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
			3:  Uint16Field("LossOfFrameSeconds", CounterAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3),
			4:  Uint16Field("LossOfSignalSeconds", CounterAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4),
			5:  Uint16Field("LossOfLinkSeconds", CounterAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5),
			6:  Uint16Field("LossOfPowerSeconds", CounterAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6),
			7:  Uint16Field("ErroredSecondsEs", CounterAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7),
			8:  Uint16Field("SeverelyErroredSeconds", CounterAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, false, false, 8),
			9:  Uint16Field("LineInitializations", CounterAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, false, false, 9),
			10: Uint16Field("FailedLineInitializations", CounterAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, false, false, 10),
			11: Uint16Field("ShortInitializations", CounterAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, true, false, 11),
			12: Uint16Field("FailedShortInitializations", CounterAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, true, false, 12),
			13: Uint16Field("FecSeconds", CounterAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, false, false, 13),
			14: Uint16Field("UnavailableSeconds", CounterAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, false, false, 14),
			15: Uint16Field("SosSuccessCount,NearEnd", CounterAttributeType, 0x0002, 0, mapset.NewSetWith(Read), false, true, false, 15),
			16: Uint16Field("SosSuccessCount,FarEnd", CounterAttributeType, 0x0001, 0, mapset.NewSetWith(Read), false, true, false, 16),
		},
		Access:  CreatedByOlt,
		Support: UnknownSupport,
		Alarms: AlarmMap{
			0:  "Loss of frame seconds",
			1:  "Loss of signal seconds",
			2:  "Loss of link seconds",
			3:  "Loss of power seconds",
			4:  "Errored seconds",
			5:  "Severely errored seconds",
			6:  "Line initializations",
			7:  "Failed line initializations",
			8:  "Short initializations",
			9:  "Failed short initializations",
			10: "FEC seconds",
			11: "Unavailable seconds",
		},
	}
}

// NewXdslXtuCPerformanceMonitoringHistoryData (class ID 112) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewXdslXtuCPerformanceMonitoringHistoryData(params ...ParamData) (*ManagedEntity, OmciErrors) {
	return NewManagedEntity(*xdslxtucperformancemonitoringhistorydataBME, params...)
}