diff --git a/vendor/google.golang.org/grpc/dialoptions.go b/vendor/google.golang.org/grpc/dialoptions.go
index 69c0031..63f5ae2 100644
--- a/vendor/google.golang.org/grpc/dialoptions.go
+++ b/vendor/google.golang.org/grpc/dialoptions.go
@@ -24,11 +24,12 @@
 	"net"
 	"time"
 
+	"google.golang.org/grpc/backoff"
 	"google.golang.org/grpc/balancer"
 	"google.golang.org/grpc/credentials"
 	"google.golang.org/grpc/grpclog"
 	"google.golang.org/grpc/internal"
-	"google.golang.org/grpc/internal/backoff"
+	internalbackoff "google.golang.org/grpc/internal/backoff"
 	"google.golang.org/grpc/internal/envconfig"
 	"google.golang.org/grpc/internal/transport"
 	"google.golang.org/grpc/keepalive"
@@ -47,7 +48,7 @@
 
 	cp          Compressor
 	dc          Decompressor
-	bs          backoff.Strategy
+	bs          internalbackoff.Strategy
 	block       bool
 	insecure    bool
 	timeout     time.Duration
@@ -57,10 +58,7 @@
 	callOptions []CallOption
 	// This is used by v1 balancer dial option WithBalancer to support v1
 	// balancer, and also by WithBalancerName dial option.
-	balancerBuilder balancer.Builder
-	// This is to support grpclb.
-	resolverBuilder             resolver.Builder
-	reqHandshake                envconfig.RequireHandshakeSetting
+	balancerBuilder             balancer.Builder
 	channelzParentID            int64
 	disableServiceConfig        bool
 	disableRetry                bool
@@ -69,6 +67,11 @@
 	minConnectTimeout           func() time.Duration
 	defaultServiceConfig        *ServiceConfig // defaultServiceConfig is parsed from defaultServiceConfigRawJSON.
 	defaultServiceConfigRawJSON *string
+	// This is used by ccResolverWrapper to backoff between successive calls to
+	// resolver.ResolveNow(). The user will have no need to configure this, but
+	// we need to be able to configure this in tests.
+	resolveNowBackoff func(int) time.Duration
+	resolvers         []resolver.Builder
 }
 
 // DialOption configures how we set up the connection.
@@ -100,17 +103,6 @@
 	}
 }
 
-// WithWaitForHandshake blocks until the initial settings frame is received from
-// the server before assigning RPCs to the connection.
-//
-// Deprecated: this is the default behavior, and this option will be removed
-// after the 1.18 release.
-func WithWaitForHandshake() DialOption {
-	return newFuncDialOption(func(o *dialOptions) {
-		o.reqHandshake = envconfig.RequireHandshakeOn
-	})
-}
-
 // WithWriteBufferSize determines how much data can be batched before doing a
 // write on the wire. The corresponding memory allocation for this buffer will
 // be twice the size to keep syscalls low. The default value for this buffer is
@@ -156,7 +148,8 @@
 // WithMaxMsgSize returns a DialOption which sets the maximum message size the
 // client can receive.
 //
-// Deprecated: use WithDefaultCallOptions(MaxCallRecvMsgSize(s)) instead.
+// Deprecated: use WithDefaultCallOptions(MaxCallRecvMsgSize(s)) instead.  Will
+// be supported throughout 1.x.
 func WithMaxMsgSize(s int) DialOption {
 	return WithDefaultCallOptions(MaxCallRecvMsgSize(s))
 }
@@ -172,7 +165,8 @@
 // WithCodec returns a DialOption which sets a codec for message marshaling and
 // unmarshaling.
 //
-// Deprecated: use WithDefaultCallOptions(ForceCodec(_)) instead.
+// Deprecated: use WithDefaultCallOptions(ForceCodec(_)) instead.  Will be
+// supported throughout 1.x.
 func WithCodec(c Codec) DialOption {
 	return WithDefaultCallOptions(CallCustomCodec(c))
 }
@@ -181,7 +175,7 @@
 // message compression. It has lower priority than the compressor set by the
 // UseCompressor CallOption.
 //
-// Deprecated: use UseCompressor instead.
+// Deprecated: use UseCompressor instead.  Will be supported throughout 1.x.
 func WithCompressor(cp Compressor) DialOption {
 	return newFuncDialOption(func(o *dialOptions) {
 		o.cp = cp
@@ -196,7 +190,8 @@
 // message.  If no compressor is registered for the encoding, an Unimplemented
 // status error will be returned.
 //
-// Deprecated: use encoding.RegisterCompressor instead.
+// Deprecated: use encoding.RegisterCompressor instead.  Will be supported
+// throughout 1.x.
 func WithDecompressor(dc Decompressor) DialOption {
 	return newFuncDialOption(func(o *dialOptions) {
 		o.dc = dc
@@ -207,7 +202,7 @@
 // Name resolver will be ignored if this DialOption is specified.
 //
 // Deprecated: use the new balancer APIs in balancer package and
-// WithBalancerName.
+// WithBalancerName.  Will be removed in a future 1.x release.
 func WithBalancer(b Balancer) DialOption {
 	return newFuncDialOption(func(o *dialOptions) {
 		o.balancerBuilder = &balancerWrapperBuilder{
@@ -223,7 +218,8 @@
 // The balancer cannot be overridden by balancer option specified by service
 // config.
 //
-// This is an EXPERIMENTAL API.
+// Deprecated: use WithDefaultServiceConfig and WithDisableServiceConfig
+// instead.  Will be removed in a future 1.x release.
 func WithBalancerName(balancerName string) DialOption {
 	builder := balancer.Get(balancerName)
 	if builder == nil {
@@ -234,27 +230,41 @@
 	})
 }
 
-// withResolverBuilder is only for grpclb.
-func withResolverBuilder(b resolver.Builder) DialOption {
-	return newFuncDialOption(func(o *dialOptions) {
-		o.resolverBuilder = b
-	})
-}
-
 // WithServiceConfig returns a DialOption which has a channel to read the
 // service configuration.
 //
-// Deprecated: service config should be received through name resolver, as
-// specified here.
-// https://github.com/grpc/grpc/blob/master/doc/service_config.md
+// Deprecated: service config should be received through name resolver or via
+// WithDefaultServiceConfig, as specified at
+// https://github.com/grpc/grpc/blob/master/doc/service_config.md.  Will be
+// removed in a future 1.x release.
 func WithServiceConfig(c <-chan ServiceConfig) DialOption {
 	return newFuncDialOption(func(o *dialOptions) {
 		o.scChan = c
 	})
 }
 
+// WithConnectParams configures the dialer to use the provided ConnectParams.
+//
+// The backoff configuration specified as part of the ConnectParams overrides
+// all defaults specified in
+// https://github.com/grpc/grpc/blob/master/doc/connection-backoff.md. Consider
+// using the backoff.DefaultConfig as a base, in cases where you want to
+// override only a subset of the backoff configuration.
+//
+// This API is EXPERIMENTAL.
+func WithConnectParams(p ConnectParams) DialOption {
+	return newFuncDialOption(func(o *dialOptions) {
+		o.bs = internalbackoff.Exponential{Config: p.Backoff}
+		o.minConnectTimeout = func() time.Duration {
+			return p.MinConnectTimeout
+		}
+	})
+}
+
 // WithBackoffMaxDelay configures the dialer to use the provided maximum delay
 // when backing off after failed connection attempts.
+//
+// Deprecated: use WithConnectParams instead. Will be supported throughout 1.x.
 func WithBackoffMaxDelay(md time.Duration) DialOption {
 	return WithBackoffConfig(BackoffConfig{MaxDelay: md})
 }
@@ -262,19 +272,18 @@
 // WithBackoffConfig configures the dialer to use the provided backoff
 // parameters after connection failures.
 //
-// Use WithBackoffMaxDelay until more parameters on BackoffConfig are opened up
-// for use.
+// Deprecated: use WithConnectParams instead. Will be supported throughout 1.x.
 func WithBackoffConfig(b BackoffConfig) DialOption {
-	return withBackoff(backoff.Exponential{
-		MaxDelay: b.MaxDelay,
-	})
+	bc := backoff.DefaultConfig
+	bc.MaxDelay = b.MaxDelay
+	return withBackoff(internalbackoff.Exponential{Config: bc})
 }
 
 // withBackoff sets the backoff strategy used for connectRetryNum after a failed
 // connection attempt.
 //
 // This can be exported if arbitrary backoff strategies are allowed by gRPC.
-func withBackoff(bs backoff.Strategy) DialOption {
+func withBackoff(bs internalbackoff.Strategy) DialOption {
 	return newFuncDialOption(func(o *dialOptions) {
 		o.bs = bs
 	})
@@ -329,7 +338,8 @@
 // WithTimeout returns a DialOption that configures a timeout for dialing a
 // ClientConn initially. This is valid if and only if WithBlock() is present.
 //
-// Deprecated: use DialContext and context.WithTimeout instead.
+// Deprecated: use DialContext instead of Dial and context.WithTimeout
+// instead.  Will be supported throughout 1.x.
 func WithTimeout(d time.Duration) DialOption {
 	return newFuncDialOption(func(o *dialOptions) {
 		o.timeout = d
@@ -347,7 +357,6 @@
 }
 
 func init() {
-	internal.WithResolverBuilder = withResolverBuilder
 	internal.WithHealthCheckFunc = withHealthCheckFunc
 }
 
@@ -356,7 +365,8 @@
 // is returned by f, gRPC checks the error's Temporary() method to decide if it
 // should try to reconnect to the network address.
 //
-// Deprecated: use WithContextDialer instead
+// Deprecated: use WithContextDialer instead.  Will be supported throughout
+// 1.x.
 func WithDialer(f func(string, time.Duration) (net.Conn, error)) DialOption {
 	return WithContextDialer(
 		func(ctx context.Context, addr string) (net.Conn, error) {
@@ -460,6 +470,8 @@
 // WithChannelzParentID returns a DialOption that specifies the channelz ID of
 // current ClientConn's parent. This function is used in nested channel creation
 // (e.g. grpclb dial).
+//
+// This API is EXPERIMENTAL.
 func WithChannelzParentID(id int64) DialOption {
 	return newFuncDialOption(func(o *dialOptions) {
 		o.channelzParentID = id
@@ -480,8 +492,10 @@
 
 // WithDefaultServiceConfig returns a DialOption that configures the default
 // service config, which will be used in cases where:
-// 1. WithDisableServiceConfig is called.
-// 2. Resolver does not return service config or if the resolver gets and invalid config.
+//
+// 1. WithDisableServiceConfig is also used.
+// 2. Resolver does not return a service config or if the resolver returns an
+//    invalid service config.
 //
 // This API is EXPERIMENTAL.
 func WithDefaultServiceConfig(s string) DialOption {
@@ -537,12 +551,12 @@
 func defaultDialOptions() dialOptions {
 	return dialOptions{
 		disableRetry:    !envconfig.Retry,
-		reqHandshake:    envconfig.RequireHandshake,
 		healthCheckFunc: internal.HealthCheckFunc,
 		copts: transport.ConnectOptions{
 			WriteBufferSize: defaultWriteBufSize,
 			ReadBufferSize:  defaultReadBufSize,
 		},
+		resolveNowBackoff: internalbackoff.DefaultExponential.Backoff,
 	}
 }
 
@@ -556,3 +570,25 @@
 		o.minConnectTimeout = f
 	})
 }
+
+// withResolveNowBackoff specifies the function that clientconn uses to backoff
+// between successive calls to resolver.ResolveNow().
+//
+// For testing purpose only.
+func withResolveNowBackoff(f func(int) time.Duration) DialOption {
+	return newFuncDialOption(func(o *dialOptions) {
+		o.resolveNowBackoff = f
+	})
+}
+
+// WithResolvers allows a list of resolver implementations to be registered
+// locally with the ClientConn without needing to be globally registered via
+// resolver.Register.  They will be matched against the scheme used for the
+// current Dial only, and will take precedence over the global registry.
+//
+// This API is EXPERIMENTAL.
+func WithResolvers(rs ...resolver.Builder) DialOption {
+	return newFuncDialOption(func(o *dialOptions) {
+		o.resolvers = append(o.resolvers, rs...)
+	})
+}