/*
 * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
 * Copyright 2020-present Open Networking Foundation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
 * NOTE: This file was generated, manual edits will be overwritten!
 *
 * Generated by 'goCodeGenerator.py':
 *              https://github.com/cboling/OMCI-parser/README.md
 */

package generated

import "github.com/deckarep/golang-set"

// Dot1AgMaintenanceAssociationClassID is the 16-bit ID for the OMCI
// Managed entity Dot1ag maintenance association
const Dot1AgMaintenanceAssociationClassID = ClassID(300) // 0x012c

var dot1agmaintenanceassociationBME *ManagedEntityDefinition

// Dot1AgMaintenanceAssociation (Class ID: #300 / 0x012c)
//	This ME models an [IEEE 802.1ag] service defined on a bridge port. An MA is a set of endpoints
//	on opposite sides of a network, all existing at a defined maintenance level. One of the
//	endpoints resides on the local ONU; the others are understood to be configured in a consistent
//	way on external equipment. [ITUT Y.1731] refers to the MA as a maintenance entity group (MEG).
//
//	An MA is created and deleted by the OLT.
//
//	Relationships
//		Any number of MAs may be associated with a given MD, or may stand on their own without an MD.
//		One or more MAs may be associated with a MAC bridge or an IEEE 802.1p mapper. An MA exists at
//		one of eight possible maintenance levels.
//
//	Attributes
//		Managed Entity Id
//			This attribute uniquely identifies an instance of this ME. The values 0 and 0xFFFF are reserved.
//			(R, setbycreate) (mandatory) (2-bytes)
//
//		Md Pointer
//			This pointer specifies the dot1ag maintenance domain with which this MA is associated. A null
//			pointer specifies that the MA is not associated with an MD. (R,-W, setbycreate) (mandatory)
//			(2-bytes)
//
//		Short Ma Name Format
//			This attribute specifies one of several possible formats for the short MA name attribute. Value
//			1, the primary VLAN ID, is recommended to be the default. (R,-W, setbycreate) (mandatory)
//			(1-byte)
//
//		Short MA Name 1
//			These two attributes may be regarded as an octet string whose value is the left-justified MA
//			name. Because the MA name may or may not be a printable character string, an octet string is the
//			appropriate representation. If the short MA name format specifies a character string, the string
//			is null-terminated; otherwise, its length is determined by the short MA name format. Note that
//			binary comparisons of the short MA name are made in other CFM state machines, so blanks,
//			alphabetic case, etc., are significant. Also, note that the MD name and the MA short name must
//			be packed (with additional bytes) into 48-byte CFM message headers. (R,-W) (mandatory) (25-bytes
//			* 2 attributes)
//
//		Short MA Name 2
//			These two attributes may be regarded as an octet string whose value is the left-justified MA
//			name. Because the MA name may or may not be a printable character string, an octet string is the
//			appropriate representation. If the short MA name format specifies a character string, the string
//			is null-terminated; otherwise, its length is determined by the short MA name format. Note that
//			binary comparisons of the short MA name are made in other CFM state machines, so blanks,
//			alphabetic case, etc., are significant. Also, note that the MD name and the MA short name must
//			be packed (with additional bytes) into 48-byte CFM message headers. (R,-W) (mandatory) (25-bytes
//			* 2 attributes)
//
//		Continuity Check Message Ccm Interval
//			3:	100 ms
//
//			4:	1 s
//
//			5:	10 s
//
//			6:	1 min
//
//			7:	10 min
//
//			Short intervals should be used judiciously, as they can interfere with the network's ability to
//			handle subscriber traffic. The recommended value is 1-s. (R,-W, setbycreate) (mandatory)
//			(1-byte)
//
//			Continuity check message (CCM) interval: If CCMs are enabled on an MEP, the CCM interval
//			attribute specifies the rate at which they are generated. The MEP also expects to receive CCMs
//			from each of the other MEPs in its CC database at this rate.
//
//			0:	CCM transmission disabled
//
//			1:	3.33 ms
//
//			2:	10 ms
//
//		Associated Vlans
//			This attribute is a list of up to 12 VLAN IDs with which this MA is associated. Once a set of
//			VLANs is defined, the ONU should deny operations to other dot1ag MAs or dot1ag default MD level
//			entries that conflict with the set membership. The all-zeros value indicates that this MA is not
//			associated with any VLANs. Assuming that the attribute is not 0, the first entry is understood
//			to be the primary VLAN. Except forwarded linktrace messages (LTMs), CFM messages emitted by MPs
//			in this MA are tagged with the primary VLAN ID. (R,-W) (mandatory) (2-bytes/entry *
//			12-entries-=-24-bytes)
//
//		Mhf Creation
//			This attribute determines whether the bridge creates an MHF, under circumstances defined in
//			clause 22.2.3 of [IEEE 802.1ag]. This attribute is an enumeration with the following values:
//
//			1	None. No MHFs are created on this bridge for this MA.
//
//			2	Default (IEEE 802.1ag term). The bridge can create MHFs on this VID on any port through which
//			the VID can pass.
//
//			3	Explicit. The bridge can create MHFs on this VID on any port through which the VID can pass,
//			but only if an MEP exists at some lower maintenance level.
//
//			4	Defer. This value causes the ONU to use the setting of the parent MD. This is recommended to
//			be the default value.
//
//			(R,-W, setbycreate) (mandatory) (1-byte)
//
type Dot1AgMaintenanceAssociation struct {
	ManagedEntityDefinition
	Attributes AttributeValueMap
}

// Attribute name constants

const Dot1AgMaintenanceAssociation_MdPointer = "MdPointer"
const Dot1AgMaintenanceAssociation_ShortMaNameFormat = "ShortMaNameFormat"
const Dot1AgMaintenanceAssociation_ShortMaName1 = "ShortMaName1"
const Dot1AgMaintenanceAssociation_ShortMaName2 = "ShortMaName2"
const Dot1AgMaintenanceAssociation_ContinuityCheckMessageCcmInterval = "ContinuityCheckMessageCcmInterval"
const Dot1AgMaintenanceAssociation_AssociatedVlans = "AssociatedVlans"
const Dot1AgMaintenanceAssociation_MhfCreation = "MhfCreation"

func init() {
	dot1agmaintenanceassociationBME = &ManagedEntityDefinition{
		Name:    "Dot1AgMaintenanceAssociation",
		ClassID: Dot1AgMaintenanceAssociationClassID,
		MessageTypes: mapset.NewSetWith(
			Create,
			Delete,
			Get,
			Set,
		),
		AllowedAttributeMask: 0xfe00,
		AttributeDefinitions: AttributeDefinitionMap{
			0: Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
			1: Uint16Field(Dot1AgMaintenanceAssociation_MdPointer, UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
			2: ByteField(Dot1AgMaintenanceAssociation_ShortMaNameFormat, UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
			3: MultiByteField(Dot1AgMaintenanceAssociation_ShortMaName1, OctetsAttributeType, 0x2000, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 3),
			4: MultiByteField(Dot1AgMaintenanceAssociation_ShortMaName2, OctetsAttributeType, 0x1000, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 4),
			5: ByteField(Dot1AgMaintenanceAssociation_ContinuityCheckMessageCcmInterval, UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
			6: Uint16Field(Dot1AgMaintenanceAssociation_AssociatedVlans, UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6),
			7: ByteField(Dot1AgMaintenanceAssociation_MhfCreation, UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7),
		},
		Access:  CreatedByOlt,
		Support: UnknownSupport,
	}
}

// NewDot1AgMaintenanceAssociation (class ID 300) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewDot1AgMaintenanceAssociation(params ...ParamData) (*ManagedEntity, OmciErrors) {
	return NewManagedEntity(*dot1agmaintenanceassociationBME, params...)
}