/*
 * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 * http://www.apache.org/licenses/LICENSE-2.0
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
 * NOTE: This file was generated, manual edits will be overwritten!
 *
 * Generated by 'goCodeGenerator.py':
 *              https://github.com/cboling/OMCI-parser/README.md
 */
package generated

import "github.com/deckarep/golang-set"

const PhysicalPathTerminationPointXdslUniPart2ClassId ClassID = ClassID(99)

var physicalpathterminationpointxdslunipart2BME *ManagedEntityDefinition

// PhysicalPathTerminationPointXdslUniPart2 (class ID #99)
//	This ME represents the point in the ONU where physical paths terminate on an xDSL CO modem
//	(xTU-C). Standards and chip sets support several forms of DSL, including VDSL2, and the xDSL ME
//	family is used for all of them, with specific extensions for technology variations.
//
//	The ONU creates or deletes an instance of this ME at the same time it creates or deletes the
//	corresponding PPTP xDSL UNI part 1.
//
//	Relationships
//		An instance of this ME is associated with each instance of a PPTP xDSL UNI part 1.
//
//	Attributes
//		Managed Entity Id
//			Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
//			identical ID, this ME is implicitly linked to an instance of the PPTP xDSL UNI part 1. (R)
//			(mandatory) (2 bytes)
//
//		Xdsl Channel Configuration Profile For Bearer Channel 0 Downstream
//			xDSL channel configuration profile for bearer channel 0 downstream:	(R, W) (optional) (2 bytes)
//
//		Xdsl Channel Configuration Profile For Bearer Channel 1 Downstream
//			xDSL channel configuration profile for bearer channel 1 downstream:	(R, W) (optional) (2 bytes)
//
//		Xdsl Channel Configuration Profile For Bearer Channel 2 Downstream
//			xDSL channel configuration profile for bearer channel 2 downstream:	(R, W) (optional) (2 bytes)
//
//		Xdsl Channel Configuration Profile For Bearer Channel 3 Downstream
//			xDSL channel configuration profile for bearer channel 3 downstream:	(R, W) (optional) (2 bytes)
//
//		Xdsl Channel Configuration Profile For Bearer Channel 0 Upstream
//			xDSL channel configuration profile for bearer channel 0 upstream:	(R, W) (optional) (2 bytes)
//
//		Xdsl Channel Configuration Profile For Bearer Channel 1 Upstream
//			xDSL channel configuration profile for bearer channel 1 upstream:	(R, W) (optional) (2 bytes)
//
//		Xdsl Channel Configuration Profile For Bearer Channel 2 Upstream
//			xDSL channel configuration profile for bearer channel 2 upstream:	(R, W) (optional) (2 bytes)
//
//		Xdsl Channel Configuration Profile For Bearer Channel 3 Upstream
//			xDSL channel configuration profile for bearer channel 3 upstream:	(R, W) (optional) (2 bytes)
//
type PhysicalPathTerminationPointXdslUniPart2 struct {
	ManagedEntityDefinition
	Attributes AttributeValueMap
}

func init() {
	physicalpathterminationpointxdslunipart2BME = &ManagedEntityDefinition{
		Name:    "PhysicalPathTerminationPointXdslUniPart2",
		ClassID: 99,
		MessageTypes: mapset.NewSetWith(
			Get,
			Set,
		),
		AllowedAttributeMask: 0XFF00,
		AttributeDefinitions: AttributeDefinitionMap{
			0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read), false, false, false, false, 0),
			1: Uint16Field("XdslChannelConfigurationProfileForBearerChannel0Downstream", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 1),
			2: Uint16Field("XdslChannelConfigurationProfileForBearerChannel1Downstream", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 2),
			3: Uint16Field("XdslChannelConfigurationProfileForBearerChannel2Downstream", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 3),
			4: Uint16Field("XdslChannelConfigurationProfileForBearerChannel3Downstream", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 4),
			5: Uint16Field("XdslChannelConfigurationProfileForBearerChannel0Upstream", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 5),
			6: Uint16Field("XdslChannelConfigurationProfileForBearerChannel1Upstream", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 6),
			7: Uint16Field("XdslChannelConfigurationProfileForBearerChannel2Upstream", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 7),
			8: Uint16Field("XdslChannelConfigurationProfileForBearerChannel3Upstream", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 8),
		},
	}
}

// NewPhysicalPathTerminationPointXdslUniPart2 (class ID 99 creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from the wire, about to be sent on the wire.
func NewPhysicalPathTerminationPointXdslUniPart2(params ...ParamData) (*ManagedEntity, OmciErrors) {
	return NewManagedEntity(physicalpathterminationpointxdslunipart2BME, params...)
}