Committing vendored dependencies and generated protos
Change-Id: I349c149b513d9de7d9f60bde2c954a939da2fc54
diff --git a/vendor/github.com/cboling/omci/generated/callcontrolperformancemonitoringhistorydata.go b/vendor/github.com/cboling/omci/generated/callcontrolperformancemonitoringhistorydata.go
new file mode 100644
index 0000000..42527d2
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/callcontrolperformancemonitoringhistorydata.go
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const CallControlPerformanceMonitoringHistoryDataClassId ClassID = ClassID(140)
+
+var callcontrolperformancemonitoringhistorydataBME *ManagedEntityDefinition
+
+// CallControlPerformanceMonitoringHistoryData (class ID #140)
+// This ME collects PM data related to the call control channel. Instances of this ME are created
+// and deleted by the OLT.
+//
+// For a complete discussion of generic PM architecture, refer to clause I.4.
+//
+// Relationships
+// An instance of this ME is associated with an instance of the PPTP POTS UNI ME.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
+// identical ID, this ME is implicitly linked to an instance of the PPTP POTS UNI. (R, setbycreate)
+// (mandatory) (2 bytes)
+//
+// Interval End Time
+// Interval end time: This attribute identifies the most recently finished 15 min interval. (R)
+// (mandatory) (1 byte)
+//
+// Threshold Data 1_2 Id
+// Threshold data 1/2 ID: This attribute points to an instance of the threshold data 1 ME that
+// contains PM threshold values. Since no threshold value attribute number exceeds 7, a threshold
+// data 2 ME is optional. (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Call Setup Failures
+// Call setup failures: This attribute counts call set-up failures. (R) (mandatory) (4 bytes)
+//
+// Call Setup Timer
+// Call setup timer: This attribute is a high water-mark that records the longest duration of a
+// single call set-up detected during this interval. Time is measured in milliseconds from the time
+// an initial set-up was requested by the subscriber until the time at which a response was
+// provided to the subscriber in the form of busy tone, audible ring tone, etc. (R) (mandatory)
+// (4 bytes)
+//
+// Call Terminate Failures
+// Call terminate failures: This attribute counts the number of calls that were terminated with
+// cause. (R) (mandatory) (4 bytes)
+//
+// Analog Port Releases
+// Analog port releases: This attribute counts the number of analogue port releases without
+// dialling detected (abandoned calls). (R) (mandatory) (4 bytes)
+//
+// Analog Port Off_Hook Timer
+// Analog port off-hook timer: This attribute is a high water-mark that records the longest period
+// of a single off-hook detected on the analogue port. Time is measured in milliseconds. (R)
+// (mandatory) (4 bytes)
+//
+type CallControlPerformanceMonitoringHistoryData struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ callcontrolperformancemonitoringhistorydataBME = &ManagedEntityDefinition{
+ Name: "CallControlPerformanceMonitoringHistoryData",
+ ClassID: 140,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0XFE00,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, false, 0),
+ 1: ByteField("IntervalEndTime", 0, mapset.NewSetWith(Read), false, false, false, false, 1),
+ 2: Uint16Field("ThresholdData12Id", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 2),
+ 3: Uint32Field("CallSetupFailures", 0, mapset.NewSetWith(Read), false, false, false, false, 3),
+ 4: Uint32Field("CallSetupTimer", 0, mapset.NewSetWith(Read), false, false, false, false, 4),
+ 5: Uint32Field("CallTerminateFailures", 0, mapset.NewSetWith(Read), false, false, false, false, 5),
+ 6: Uint32Field("AnalogPortReleases", 0, mapset.NewSetWith(Read), false, false, false, false, 6),
+ 7: Uint32Field("AnalogPortOffHookTimer", 0, mapset.NewSetWith(Read), false, false, false, false, 7),
+ },
+ }
+}
+
+// NewCallControlPerformanceMonitoringHistoryData (class ID 140 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewCallControlPerformanceMonitoringHistoryData(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(callcontrolperformancemonitoringhistorydataBME, params...)
+}