Committing vendored dependencies and generated protos
Change-Id: I349c149b513d9de7d9f60bde2c954a939da2fc54
diff --git a/vendor/github.com/cboling/omci/generated/cardholder.go b/vendor/github.com/cboling/omci/generated/cardholder.go
new file mode 100644
index 0000000..0a3059b
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/cardholder.go
@@ -0,0 +1,153 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const CardholderClassId ClassID = ClassID(5)
+
+var cardholderBME *ManagedEntityDefinition
+
+// Cardholder (class ID #5)
+// The cardholder represents the fixed equipment slot configuration of the ONU. Each cardholder can
+// contain 0 or 1 circuit packs; the circuit pack models equipment information that can change over
+// the lifetime of the ONU, e.g., through replacement.
+//
+// One instance of this ME exists for each physical slot in an ONU that has pluggable circuit
+// packs. One or more instances of this ME may also exist in an integrated ONU, to represent
+// virtual slots. Instances of this ME are created automatically by the ONU, and the status
+// attributes are populated according to data within the ONU itself.
+//
+// Slot 0 is intended to be used only in an integrated ONU. If an integrated ONU is modelled with a
+// universal slot 0, it is recommended that it does not contain additional (non-zero) virtual
+// slots. A cardholder for virtual slot 0 is recommended.
+//
+// There is potential for conflict in the semantics of the expected plug-in unit type, the expected
+// port count and the expected equipment ID, both when the slot is not populated and when a new
+// circuit pack is inserted. The expected plug-in unit type and the plug-in type mismatch alarm are
+// mandatory, although plug-and-play/unknown (circuit pack type 255) may be used as a way to
+// minimize their significance. It is recommended that an ONU deny the provisioning of inconsistent
+// combinations of expected equipment attributes.
+//
+// When a circuit pack is plugged into a cardholder or when a cardholder is pre-provisioned to
+// expect a circuit pack of a given type, it may trigger the ONU to instantiate a number of MEs and
+// update the values of others, depending on the circuit pack type. The ONU may also delete a
+// variety of other MEs when a circuit pack is reprovisioned to not expect a circuit pack or to
+// expect a circuit pack of a different type. These actions are described in the definitions of the
+// various MEs.
+//
+// Expected equipment ID and expected port count are alternate ways to trigger the same
+// preprovisioning effects. These tools may be useful if an ONU is prepared to accept more than one
+// circuit pack of a given type but with different port counts, or if a circuit pack is a hybrid
+// that matches none of the types in Table 9.1.5-1, but whose identification (e.g., part number) is
+// known.
+//
+// Relationships
+// An ONU may contain zero or more instances of the cardholder, each of which may contain an
+// instance of the circuit pack ME. The slot ID, real or virtual, is a fundamental identification
+// mechanism for MEs that bear some relationship to a physical location.
+//
+// Attributes
+// Managed Entity Id
+// NOTE 1 – Some xDSL MEs use the two MSBs of the slot number for other purposes. An ONU that
+// supports these services may have slot limitations or restrictions.
+//
+// Actual Plug In Unit Type
+// Actual plugin unit type: This attribute is equal to the type of the circuit pack in the
+// cardholder, or 0 if the cardholder is empty. When the cardholder is populated, this attribute is
+// the same as the type attribute of the corresponding circuit pack ME. Circuit pack types are
+// defined in Table 9.1.5-1. (R) (mandatory) (1 byte)
+//
+// Expected Plug_In Unit Type
+// Expected plug-in unit type: This attribute provisions the type of circuit pack for the slot. For
+// type coding, see Table 9.1.5-1. The value 0 means that the cardholder is not provisioned to
+// contain a circuit pack. The value 255 means that the cardholder is configured for plug-and-play.
+// Upon ME instantiation, the ONU sets this attribute to 0. For integrated interfaces, this
+// attribute may be used to represent the type of interface. (R, W) (mandatory) (1 byte)
+//
+// Expected Port Count
+// Expected port count: This attribute permits the OLT to specify the number of ports it expects in
+// a circuit pack. Prior to provisioning by the OLT, the ONU initializes this attribute to 0.
+// (R, W) (optional) (1 byte)
+//
+// Expected Equipment Id
+// Expected equipment ID: This attribute provisions the specific type of expected circuit pack.
+// This attribute applies only to ONUs that do not have integrated interfaces. In some
+// environments, this may contain the expected CLEI code. Upon ME instantiation, the ONU sets this
+// attribute to all spaces. (R, W) (optional) (20 bytes)
+//
+// Actual Equipment Id
+// Actual equipment ID: This attribute identifies the specific type of circuit pack, once it is
+// installed. This attribute applies only to ONUs that do not have integrated interfaces. In some
+// environments, this may include the CLEI code. When the slot is empty or the equipment ID is not
+// known, this attribute should be set to all spaces. (R) (optional) (20 bytes)
+//
+// Protection Profile Pointer
+// Protection profile pointer: This attribute specifies an equipment protection profile that may be
+// associated with the cardholder. Its value is the least significant byte of the ME ID of the
+// equipment protection profile with which it is associated, or 0 if equipment protection is not
+// used. (R) (optional) (1 byte)
+//
+// Invoke Protection Switch
+// When circuit packs that support a PON interface (IF) function are switched, the response should
+// be returned on the same PON that received the command. However, the OLT should also be prepared
+// to accept a response on the redundant PON. (R, W) (optional) (1 byte)
+//
+// Alarm _ Reporting Control
+// Alarm-reporting control (ARC): See clause A.1.4.3. (R, W) (optional) (1 byte)
+//
+// Arc Interval
+// ARC interval: See clause A.1.4.3. (R, W) (optional) (1 byte)
+//
+type Cardholder struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ cardholderBME = &ManagedEntityDefinition{
+ Name: "Cardholder",
+ ClassID: 5,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0XFF80,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read), false, false, false, false, 0),
+ 1: ByteField("ActualPlugInUnitType", 0, mapset.NewSetWith(Read), true, false, false, false, 1),
+ 2: ByteField("ExpectedPlugInUnitType", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 2),
+ 3: ByteField("ExpectedPortCount", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 3),
+ 4: MultiByteField("ExpectedEquipmentId", 20, nil, mapset.NewSetWith(Read, Write), false, false, true, false, 4),
+ 5: MultiByteField("ActualEquipmentId", 20, nil, mapset.NewSetWith(Read), true, false, true, false, 5),
+ 6: ByteField("ProtectionProfilePointer", 0, mapset.NewSetWith(Read), false, false, true, false, 6),
+ 7: ByteField("InvokeProtectionSwitch", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 7),
+ 8: ByteField("AlarmReportingControl", 0, mapset.NewSetWith(Read, Write), true, false, true, false, 8),
+ 9: ByteField("ArcInterval", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 9),
+ },
+ }
+}
+
+// NewCardholder (class ID 5 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewCardholder(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(cardholderBME, params...)
+}