Committing vendored dependencies and generated protos

Change-Id: I349c149b513d9de7d9f60bde2c954a939da2fc54
diff --git a/vendor/github.com/cboling/omci/generated/dot1agmaintenanceassociation.go b/vendor/github.com/cboling/omci/generated/dot1agmaintenanceassociation.go
new file mode 100644
index 0000000..3c09b07
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/dot1agmaintenanceassociation.go
@@ -0,0 +1,120 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const Dot1AgMaintenanceAssociationClassId ClassID = ClassID(300)
+
+var dot1agmaintenanceassociationBME *ManagedEntityDefinition
+
+// Dot1AgMaintenanceAssociation (class ID #300)
+//	This ME models an [IEEE 802.1ag] service defined on a bridge port. An MA is a set of endpoints
+//	on opposite sides of a network, all existing at a defined maintenance level. One of the
+//	endpoints resides on the local ONU; the others are understood to be configured in a consistent
+//	way on external equipment. [ITUT Y.1731] refers to the MA as a maintenance entity group (MEG).
+//
+//	An MA is created and deleted by the OLT.
+//
+//	Relationships
+//		Any number of MAs may be associated with a given MD, or may stand on their own without an MD.
+//		One or more MAs may be associated with a MAC bridge or an IEEE 802.1p mapper. An MA exists at
+//		one of eight possible maintenance levels.
+//
+//	Attributes
+//		Managed Entity Id
+//			Managed entity ID: This attribute uniquely identifies an instance of this ME. The values 0 and
+//			0xFFFF are reserved. (R, setbycreate) (mandatory) (2 bytes)
+//
+//		Md Pointer
+//			MD pointer:	This pointer specifies the dot1ag maintenance domain with which this MA is
+//			associated. A null pointer specifies that the MA is not associated with an MD. (R, W,
+//			setbycreate) (mandatory) (2 bytes)
+//
+//		Short Ma Name Format
+//			Short MA name format: This attribute specifies one of several possible formats for the short MA
+//			name attribute. Value 1, the primary VLAN ID, is recommended to be the default. (R, W,
+//			setbycreate) (mandatory) (1 byte)
+//
+//		Short Ma Name 1, Short Ma Name 2
+//			Short MA name 1, Short MA name 2: These two attributes may be regarded as an octet string whose
+//			value is the left-justified MA name. Because the MA name may or may not be a printable character
+//			string, an octet string is the appropriate representation. If the short MA name format specifies
+//			a character string, the string is null-terminated; otherwise, its length is determined by the
+//			short MA name format. Note that binary comparisons of the short MA name are made in other CFM
+//			state machines, so blanks, alphabetic case, etc., are significant. Also, note that the MD name
+//			and the MA short name must be packed (with additional bytes) into 48 byte CFM message headers.
+//			(R, W) (mandatory) (25 bytes * 2 attributes)
+//
+//		Continuity Check Message Ccm Interval
+//			Short intervals should be used judiciously, as they can interfere with the network's ability to
+//			handle subscriber traffic. The recommended value is 1 s. (R, W, setbycreate) (mandatory)
+//			(1 byte)
+//
+//		Associated Vlans
+//			Associated VLANs: This attribute is a list of up to 12 VLAN IDs with which this MA is
+//			associated. Once a set of VLANs is defined, the ONU should deny operations to other dot1ag MAs
+//			or dot1ag default MD level entries that conflict with the set membership. The all-zeros value
+//			indicates that this MA is not associated with any VLANs. Assuming that the attribute is not 0,
+//			the first entry is understood to be the primary VLAN. Except forwarded linktrace messages
+//			(LTMs), CFM messages emitted by MPs in this MA are tagged with the primary VLAN ID. (R, W)
+//			(mandatory) (2 bytes/entry * 12 entries = 24 bytes)
+//
+//		Mhf Creation
+//			(R, W, setbycreate) (mandatory) (1 byte)
+//
+//		Sender Id Permission
+//			(R, W, setbycreate) (mandatory) (1 byte)
+//
+type Dot1AgMaintenanceAssociation struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	dot1agmaintenanceassociationBME = &ManagedEntityDefinition{
+		Name:    "Dot1AgMaintenanceAssociation",
+		ClassID: 300,
+		MessageTypes: mapset.NewSetWith(
+			Create,
+			Delete,
+			Get,
+			Set,
+		),
+		AllowedAttributeMask: 0XFE00,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, false, 0),
+			1: Uint16Field("MdPointer", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 1),
+			2: ByteField("ShortMaNameFormat", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 2),
+			3: MultiByteField("ShortMaName1,ShortMaName2", 25, nil, mapset.NewSetWith(Read, Write), false, false, false, false, 3),
+			4: ByteField("ContinuityCheckMessageCcmInterval", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 4),
+			5: MultiByteField("AssociatedVlans", 24, nil, mapset.NewSetWith(Read, Write), false, false, false, false, 5),
+			6: ByteField("MhfCreation", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 6),
+			7: ByteField("SenderIdPermission", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 7),
+		},
+	}
+}
+
+// NewDot1AgMaintenanceAssociation (class ID 300 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewDot1AgMaintenanceAssociation(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(dot1agmaintenanceassociationBME, params...)
+}