Committing vendored dependencies and generated protos
Change-Id: I349c149b513d9de7d9f60bde2c954a939da2fc54
diff --git a/vendor/github.com/cboling/omci/generated/dot1xperformancemonitoringhistorydata.go b/vendor/github.com/cboling/omci/generated/dot1xperformancemonitoringhistorydata.go
new file mode 100644
index 0000000..18d4bd6
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/dot1xperformancemonitoringhistorydata.go
@@ -0,0 +1,144 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const Dot1XPerformanceMonitoringHistoryDataClassId ClassID = ClassID(292)
+
+var dot1xperformancemonitoringhistorydataBME *ManagedEntityDefinition
+
+// Dot1XPerformanceMonitoringHistoryData (class ID #292)
+// This ME collects performance statistics on an ONU's IEEE 802.1X CPE authentication operation.
+// Instances of this ME are created and deleted by the OLT.
+//
+// For a complete discussion of generic PM architecture, refer to clause I.4.
+//
+// Relationships
+// An instance of this ME may be associated with each UNI that can perform IEEE 802.1X
+// authentication of CPE.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
+// identical ID, this ME is implicitly linked to an instance of a PPTP. (R, setbycreate)
+// (mandatory) (2 bytes)
+//
+// Interval End Time
+// Interval end time: This attribute identifies the most recently finished 15 min interval. (R)
+// (mandatory) (1 byte)
+//
+// Threshold Data 1_2 Id
+// Threshold data 1/2 ID: This attribute points to an instance of the threshold data 1 and 2 MEs
+// that contains PM threshold values. (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Eapol Frames Received
+// EAPOL frames received: This attribute counts received valid EAPOL frames of any type. (R)
+// (mandatory) (4 bytes)
+//
+// Eapol Frames Transmitted
+// EAPOL frames transmitted: This attribute counts transmitted EAPOL frames of any type. (R)
+// (mandatory) (4 bytes)
+//
+// Eapol Start Frames Received
+// EAPOL start frames received: This attribute counts received EAPOL start frames. (R) (mandatory)
+// (4 bytes)
+//
+// Eapol Logoff Frames Received
+// EAPOL logoff frames received: This attribute counts received EAPOL logoff frames. (R)
+// (mandatory) (4 bytes)
+//
+// Invalid Eapol Frames Received
+// Invalid EAPOL frames received: This attribute counts received EAPOL frames in which the frame
+// type was not recognized. (R) (mandatory) (4 bytes)
+//
+// Eap Resp_Id Frames Received
+// EAP resp/id frames received: This attribute counts received EAP response frames containing an
+// identifier type field. (R) (mandatory) (4 bytes)
+//
+// Eap Response Frames Received
+// EAP response frames received: This attribute counts received EAP response frames, other than
+// resp/id frames. (R) (mandatory) (4 bytes)
+//
+// Eap Initial Request Frames Transmitted
+// EAP initial request frames transmitted: This attribute counts transmitted request frames
+// containing an identifier type field. In [IEEE 802.1X], this is also called ReqId. (R)
+// (mandatory) (4 bytes)
+//
+// Eap Request Frames Transmitted
+// EAP request frames transmitted: This attribute counts transmitted request frames, other than
+// request/id frames. (R) (mandatory) (4 bytes)
+//
+// Eap Length Error Frames Received
+// EAP length error frames received: This attribute counts received EAPOL frames whose packet body
+// length field was invalid. (R) (mandatory) (4 bytes)
+//
+// Eap Success Frames Generated Autonomously
+// EAP success frames generated autonomously: This attribute counts EAPOL success frames generated
+// according to the local fallback policy because no radius server was available. (R) (mandatory)
+// (4 bytes)
+//
+// Eap Failure Frames Generated Autonomously
+// EAP failure frames generated autonomously: This attribute counts EAPOL failure frames generated
+// according to the local fallback policy because no radius server was available. (R) (mandatory)
+// (4 bytes)
+//
+type Dot1XPerformanceMonitoringHistoryData struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ dot1xperformancemonitoringhistorydataBME = &ManagedEntityDefinition{
+ Name: "Dot1XPerformanceMonitoringHistoryData",
+ ClassID: 292,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0XFFFC,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, false, 0),
+ 1: ByteField("IntervalEndTime", 0, mapset.NewSetWith(Read), false, false, false, false, 1),
+ 2: Uint16Field("ThresholdData12Id", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 2),
+ 3: Uint32Field("EapolFramesReceived", 0, mapset.NewSetWith(Read), false, false, false, false, 3),
+ 4: Uint32Field("EapolFramesTransmitted", 0, mapset.NewSetWith(Read), false, false, false, false, 4),
+ 5: Uint32Field("EapolStartFramesReceived", 0, mapset.NewSetWith(Read), false, false, false, false, 5),
+ 6: Uint32Field("EapolLogoffFramesReceived", 0, mapset.NewSetWith(Read), false, false, false, false, 6),
+ 7: Uint32Field("InvalidEapolFramesReceived", 0, mapset.NewSetWith(Read), false, false, false, false, 7),
+ 8: Uint32Field("EapRespIdFramesReceived", 0, mapset.NewSetWith(Read), false, false, false, false, 8),
+ 9: Uint32Field("EapResponseFramesReceived", 0, mapset.NewSetWith(Read), false, false, false, false, 9),
+ 10: Uint32Field("EapInitialRequestFramesTransmitted", 0, mapset.NewSetWith(Read), false, false, false, false, 10),
+ 11: Uint32Field("EapRequestFramesTransmitted", 0, mapset.NewSetWith(Read), false, false, false, false, 11),
+ 12: Uint32Field("EapLengthErrorFramesReceived", 0, mapset.NewSetWith(Read), false, false, false, false, 12),
+ 13: Uint32Field("EapSuccessFramesGeneratedAutonomously", 0, mapset.NewSetWith(Read), false, false, false, false, 13),
+ 14: Uint32Field("EapFailureFramesGeneratedAutonomously", 0, mapset.NewSetWith(Read), false, false, false, false, 14),
+ },
+ }
+}
+
+// NewDot1XPerformanceMonitoringHistoryData (class ID 292 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewDot1XPerformanceMonitoringHistoryData(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(dot1xperformancemonitoringhistorydataBME, params...)
+}