Committing vendored dependencies and generated protos
Change-Id: I349c149b513d9de7d9f60bde2c954a939da2fc54
diff --git a/vendor/github.com/cboling/omci/generated/dot1xportextensionpackage.go b/vendor/github.com/cboling/omci/generated/dot1xportextensionpackage.go
new file mode 100644
index 0000000..7ff0491
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/dot1xportextensionpackage.go
@@ -0,0 +1,140 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const Dot1XPortExtensionPackageClassId ClassID = ClassID(290)
+
+var dot1xportextensionpackageBME *ManagedEntityDefinition
+
+// Dot1XPortExtensionPackage (class ID #290)
+// An instance of this ME represents a set of attributes that control a port's IEEE 802.1X
+// operation. It is created and deleted autonomously by the ONU upon the creation or deletion of a
+// PPTP that supports [IEEE 802.1X] authentication of customer premises equipment (CPE).
+//
+// Relationships
+// An instance of this ME is associated with a PPTP that performs IEEE 802.1X authentication of CPE
+// (e.g., Ethernet or DSL).
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute provides a unique number for each instance of this ME. Its
+// value is the same as that of its associated PPTP (i.e., slot and port number). (R) (mandatory)
+// (2 bytes)
+//
+// Dot1X Enable
+// Dot1x enable: If true, this Boolean attribute forces the associated port to authenticate via
+// [IEEE 802.1X] as a precondition of normal service. The default value false does not impose IEEE
+// 802.1X authentication on the associated port. (R, W) (mandatory) (1 byte)
+//
+// Action Register
+// (W) (mandatory) (1 byte)
+//
+// Authenticator Pae State
+// (R) (optional) (1 byte)
+//
+// Backend Authentication State
+// (R) (optional) (1 byte)
+//
+// Admin Controlled Directions
+// Admin controlled directions: This attribute controls the directionality of the port's
+// authentication requirement. The default value 0 indicates that control is imposed in both
+// directions. The value 1 indicates that control is imposed only on traffic from the subscriber
+// towards the network. (R, W) (optional) (1 byte)
+//
+// Operational Controlled Directions
+// Operational controlled directions: This attribute indicates the directionality of the port's
+// current authentication state. The value 0 indicates that control is imposed in both directions.
+// The value 1 indicates that control is imposed only on traffic from the subscriber towards the
+// network. (R) (optional) (1 byte)
+//
+// Authenticator Controlled Port Status
+// Authenticator controlled port status: This attribute indicates whether the controlled port is
+// currently authorized (1) or unauthorized (2). (R) (optional) (1 byte)
+//
+// Quiet Period
+// Quiet period: This attribute specifies the interval between EAP request/identity invitations
+// sent to the peer. Other events such as carrier present or EAPOL start frames from the peer may
+// trigger an EAP request/identity frame from the ONU at any time; this attribute controls the
+// ONU's periodic behaviour in the absence of these other inputs. It is expressed in seconds.
+// (R, W) (optional) (2 bytes)
+//
+// Server Timeout Period
+// Server timeout period: This attribute specifies the time the ONU will wait for a response from
+// the radius server before timing out. Within this maximum interval, the ONU may initiate several
+// retransmissions with exponentially increasing delay. Upon timeout, the ONU may try another
+// radius server if there is one, or invoke the fallback policy, if no alternate radius servers are
+// available. Server timeout is expressed in seconds, with a default value of 30 and a maximum
+// value of 65535. (R, W) (optional) (2 bytes)
+//
+// Re_Authentication Period
+// Re-authentication period: This attribute records the re-authentication interval specified by the
+// radius authentication server. It is expressed in seconds. The attribute is only meaningful after
+// a port has been authenticated. (R) (optional) (2 bytes)
+//
+// Re_Authentication Enabled
+// Re-authentication enabled: This Boolean attribute records whether the radius authentication
+// server has enabled re-authentication on this service (true) or not (false). The attribute is
+// only meaningful after a port has been authenticated. (R) (optional) (1 byte)
+//
+// Key Transmission Enabled
+// Key transmission enabled: This Boolean attribute indicates whether key transmission is enabled
+// (true) or not (false). This feature is not required; the parameter is listed here for
+// completeness vis-à-vis [IEEE 802.1X]. (R, W) (optional) (1 byte)
+//
+type Dot1XPortExtensionPackage struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ dot1xportextensionpackageBME = &ManagedEntityDefinition{
+ Name: "Dot1XPortExtensionPackage",
+ ClassID: 290,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0XFFF0,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read), false, false, false, false, 0),
+ 1: ByteField("Dot1XEnable", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 1),
+ 2: ByteField("ActionRegister", 0, mapset.NewSetWith(Write), false, false, false, false, 2),
+ 3: ByteField("AuthenticatorPaeState", 0, mapset.NewSetWith(Read), false, false, true, false, 3),
+ 4: ByteField("BackendAuthenticationState", 0, mapset.NewSetWith(Read), false, false, true, false, 4),
+ 5: ByteField("AdminControlledDirections", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 5),
+ 6: ByteField("OperationalControlledDirections", 0, mapset.NewSetWith(Read), false, false, true, false, 6),
+ 7: ByteField("AuthenticatorControlledPortStatus", 0, mapset.NewSetWith(Read), false, false, true, false, 7),
+ 8: Uint16Field("QuietPeriod", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 8),
+ 9: Uint16Field("ServerTimeoutPeriod", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 9),
+ 10: Uint16Field("ReAuthenticationPeriod", 0, mapset.NewSetWith(Read), false, false, true, false, 10),
+ 11: ByteField("ReAuthenticationEnabled", 0, mapset.NewSetWith(Read), false, false, true, false, 11),
+ 12: ByteField("KeyTransmissionEnabled", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 12),
+ },
+ }
+}
+
+// NewDot1XPortExtensionPackage (class ID 290 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewDot1XPortExtensionPackage(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(dot1xportextensionpackageBME, params...)
+}