Committing vendored dependencies and generated protos
Change-Id: I349c149b513d9de7d9f60bde2c954a939da2fc54
diff --git a/vendor/github.com/cboling/omci/generated/geminterworkingterminationpoint.go b/vendor/github.com/cboling/omci/generated/geminterworkingterminationpoint.go
new file mode 100644
index 0000000..aa6693f
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/geminterworkingterminationpoint.go
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const GemInterworkingTerminationPointClassId ClassID = ClassID(266)
+
+var geminterworkingterminationpointBME *ManagedEntityDefinition
+
+// GemInterworkingTerminationPoint (class ID #266)
+// An instance of this ME represents a point in the ONU where the IW of a bearer service (usually
+// Ethernet) to the GEM layer takes place. At this point, GEM packets are generated from the bearer
+// bit stream (e.g., Ethernet) or the bearer bit stream is reconstructed from GEM packets.
+//
+// Instances of this ME are created and deleted by the OLT.
+//
+// Relationships
+// One instance of this ME exists for each transformation of a data stream into GEM frames and vice
+// versa.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. (R, setbycreate)
+// (mandatory) (2 bytes)
+//
+// Gem Port Network Ctp Connectivity Pointer
+// GEM port network CTP connectivity pointer: This attribute points to an instance of the GEM port
+// network CTP. (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Interworking Option
+// (R, W, setbycreate) (mandatory) (1 byte)
+//
+// Service Profile Pointer
+// NOTE – The video return path (VRP) service profile is defined in [ITU-T G.984.4].
+//
+// Interworking Termination Point Pointer
+// In all other GEM services, the relationship between the related service TP and this GEM IW TP is
+// derived from other ME relations; this attribute is set to a null pointer and not used. (R, W,
+// setbycreate) (mandatory) (2 bytes)
+//
+// Pptp Counter
+// PPTP counter: This value reports the number of PPTP ME instances associated with this GEM IW TP.
+// (R) (optional) (1 byte)
+//
+// Operational State
+// Operational state: This attribute indicates whether the ME is capable of performing its
+// function. Valid values are enabled (0) and disabled (1). (R) (optional) (1 byte)
+//
+// Gal Profile Pointer
+// (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Gal Loopback Configuration
+// The default value of this attribute is 0. When the IW option is 6 (downstream broadcast), this
+// attribute is not used. (R, W) (mandatory) (1 byte)
+//
+type GemInterworkingTerminationPoint struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ geminterworkingterminationpointBME = &ManagedEntityDefinition{
+ Name: "GemInterworkingTerminationPoint",
+ ClassID: 266,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0XFF00,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, false, 0),
+ 1: Uint16Field("GemPortNetworkCtpConnectivityPointer", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 1),
+ 2: ByteField("InterworkingOption", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 2),
+ 3: Uint16Field("ServiceProfilePointer", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 3),
+ 4: Uint16Field("InterworkingTerminationPointPointer", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 4),
+ 5: ByteField("PptpCounter", 0, mapset.NewSetWith(Read), false, false, true, false, 5),
+ 6: ByteField("OperationalState", 0, mapset.NewSetWith(Read), true, false, true, false, 6),
+ 7: Uint16Field("GalProfilePointer", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 7),
+ 8: ByteField("GalLoopbackConfiguration", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 8),
+ },
+ }
+}
+
+// NewGemInterworkingTerminationPoint (class ID 266 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewGemInterworkingTerminationPoint(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(geminterworkingterminationpointBME, params...)
+}