Committing vendored dependencies and generated protos
Change-Id: I349c149b513d9de7d9f60bde2c954a939da2fc54
diff --git a/vendor/github.com/cboling/omci/generated/ieee802.1pmapperserviceprofile.go b/vendor/github.com/cboling/omci/generated/ieee802.1pmapperserviceprofile.go
new file mode 100644
index 0000000..1906172
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/ieee802.1pmapperserviceprofile.go
@@ -0,0 +1,134 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const Ieee8021PMapperServiceProfileClassId ClassID = ClassID(130)
+
+var ieee8021pmapperserviceprofileBME *ManagedEntityDefinition
+
+// Ieee8021PMapperServiceProfile (class ID #130)
+// This ME associates the priorities of IEEE 802.1p [IEEE 802.1D] priority tagged frames with
+// specific connections. This ME directs upstream traffic to the designated GEM ports. Downstream
+// traffic arriving on any of the IEEE 802.1p mapper's GEM ports is directed to the mapper's root
+// TP. Other mechanisms exist to direct downstream traffic, specifically a direct pointer to a
+// downstream queue from the GEM port network CTP. If such an alternative is used, it should be
+// provisioned to be consistent with the flow model of the mapper.
+//
+// Instances of this ME are created and deleted by the OLT.
+//
+// Relationships
+// At its root, an instance of this ME may be associated with zero or one instance of a PPTP UNI,
+// MAC bridge port configuration data, or any type of IW TP ME that carries IEEE 802 traffic. Each
+// of its eight branches is associated with zero or one GEM IW TP.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. (R, setbycreate)
+// (mandatory) (2 bytes)
+//
+// Tp Pointer
+// (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Interwork Tp Pointer For P_Bit Priority 0
+// Interwork TP pointer for P-bit priority 0: (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Interwork Tp Pointer For P_Bit Priority 1
+// Interwork TP pointer for P-bit priority 1: (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Interwork Tp Pointer For P_Bit Priority 2
+// Interwork TP pointer for P-bit priority 2: (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Interwork Tp Pointer For P_Bit Priority 3
+// Interwork TP pointer for P-bit priority 3: (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Interwork Tp Pointer For P_Bit Priority 4
+// Interwork TP pointer for P-bit priority 4: (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Interwork Tp Pointer For P_Bit Priority 5
+// Interwork TP pointer for P-bit priority 5: (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Interwork Tp Pointer For P_Bit Priority 6
+// Interwork TP pointer for P-bit priority 6: (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Interwork Tp Pointer For P_Bit Priority 7
+// Interwork TP pointer for P-bit priority 7: (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Unmarked Frame Option
+// Untagged downstream frames are passed through the mapper transparently.
+//
+// Dscp To P Bit Mapping
+// NOTE – If certain bits in the DSCP field are to be ignored in the mapping process, the attribute
+// should be provisioned such that all possible values of those bits produce the same P-bit
+// mapping. This can be applied to the case where instead of full DSCP, the operator wishes to
+// adopt the priority mechanism based on IP precedence, which needs only the three MSBs of the DSCP
+// field.
+//
+// Default P Bit Assumption
+// Default P-bit assumption: This attribute is valid when the unmarked frame option attribute is
+// set to 1. In its LSBs, the default Pbit assumption attribute contains the default PCP field to
+// be assumed. The unmodified frame is then directed to the GEM IW TP indicated by the interwork TP
+// pointer mappings. (R, W, setbycreate) (mandatory) (1 byte)
+//
+// Tp Type
+// (R, W, setbycreate) (optional) (1 byte)
+//
+type Ieee8021PMapperServiceProfile struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ ieee8021pmapperserviceprofileBME = &ManagedEntityDefinition{
+ Name: "Ieee8021PMapperServiceProfile",
+ ClassID: 130,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0XFFF8,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, false, 0),
+ 1: Uint16Field("TpPointer", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 1),
+ 2: Uint16Field("InterworkTpPointerForPBitPriority0", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 2),
+ 3: Uint16Field("InterworkTpPointerForPBitPriority1", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 3),
+ 4: Uint16Field("InterworkTpPointerForPBitPriority2", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 4),
+ 5: Uint16Field("InterworkTpPointerForPBitPriority3", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 5),
+ 6: Uint16Field("InterworkTpPointerForPBitPriority4", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 6),
+ 7: Uint16Field("InterworkTpPointerForPBitPriority5", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 7),
+ 8: Uint16Field("InterworkTpPointerForPBitPriority6", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 8),
+ 9: Uint16Field("InterworkTpPointerForPBitPriority7", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 9),
+ 10: ByteField("UnmarkedFrameOption", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 10),
+ 11: MultiByteField("DscpToPBitMapping", 24, nil, mapset.NewSetWith(Read, Write), false, false, false, false, 11),
+ 12: ByteField("DefaultPBitAssumption", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 12),
+ 13: ByteField("TpType", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 13),
+ },
+ }
+}
+
+// NewIeee8021PMapperServiceProfile (class ID 130 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewIeee8021PMapperServiceProfile(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(ieee8021pmapperserviceprofileBME, params...)
+}