Committing vendored dependencies and generated protos
Change-Id: I349c149b513d9de7d9f60bde2c954a939da2fc54
diff --git a/vendor/github.com/cboling/omci/generated/macbridgeportconfigurationdata.go b/vendor/github.com/cboling/omci/generated/macbridgeportconfigurationdata.go
new file mode 100644
index 0000000..7054adb
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/macbridgeportconfigurationdata.go
@@ -0,0 +1,134 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const MacBridgePortConfigurationDataClassId ClassID = ClassID(47)
+
+var macbridgeportconfigurationdataBME *ManagedEntityDefinition
+
+// MacBridgePortConfigurationData (class ID #47)
+// This ME models a port on a MAC bridge. Instances of this ME are created and deleted by the OLT.
+//
+// Relationships
+// An instance of this ME is linked to an instance of the MAC bridge service profile. Additional
+// bridge port control capabilities are provided by implicitly linked instances of some or all of://// • MAC bridge port filter table data;//// • MAC bridge port filter pre-assign table;//// • VLAN tagging filter data;//// • Dot1 rate limiter.//// Real-time status of the bridge port is provided by implicitly linked instances of://// • MAC bridge port designation data;//// • MAC bridge port bridge table data;//// • Multicast subscriber monitor.//// Bridge port PM collection is provided by implicitly linked instances of://// • MAC bridge port PM history data;//// • Ethernet frame PM history data upstream and downstream;//// • Ethernet frame extended PM (preferred).
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. (R, setbycreate)
+// (mandatory) (2 bytes)
+//
+// Bridge Id Pointer
+// Bridge ID pointer: This attribute points to an instance of the MAC bridge service profile.
+// (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Port Num
+// Port num: This attribute is the bridge port number. It must be unique among all ports associated
+// with a particular MAC bridge service profile. (R, W, setbycreate) (mandatory) (1 byte)
+//
+// Tp Type
+// (R, W, setbycreate) (mandatory) (1 byte)
+//
+// Tp Pointer
+// NOTE 1 – When the TP type is very high-speed digital subscriber line (VDSL) or xDSL, the two
+// MSBs may be used to indicate a bearer channel.
+//
+// Port Priority
+// Port priority: This attribute denotes the priority of the port for use in (rapid) spanning tree
+// algorithms. The range is 0..255. (R, W, setbycreate) (optional) (2 bytes)
+//
+// Port Path Cost
+// Port path cost: This attribute specifies the contribution of the port to the path cost towards
+// the spanning tree root bridge. The range is 1..65535. (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Port Spanning Tree Ind
+// Port spanning tree ind: The Boolean value true enables (R)STP LAN topology change detection at
+// this port. The value false disables topology change detection. (R, W, setbycreate) (mandatory)
+// (1 byte)
+//
+// Deprecated 1
+// Deprecated 1: This attribute is not used. If present, it should be ignored by both the ONU and
+// the OLT, except as necessary to comply with OMCI message definitions. (R, W, setbycreate)
+// (optional) (1 byte)
+//
+// Deprecated 2
+// Deprecated 2: This attribute is not used. If present, it should be ignored by both the ONU and
+// the OLT, except as necessary to comply with OMCI message definitions. (R, W, setbycreate)
+// (1 byte) (optional)
+//
+// Port Mac Address
+// Port MAC address: If the TP associated with this port has a MAC address, this attribute
+// specifies it. (R) (optional) (6 bytes)
+//
+// Outbound Td Pointer
+// Outbound TD pointer: This attribute points to a traffic descriptor that limits the traffic rate
+// leaving the MAC bridge. (R, W) (optional) (2 byte)
+//
+// Inbound Td Pointer
+// Inbound TD pointer: This attribute points to a traffic descriptor that limits the traffic rate
+// entering the MAC bridge. (R, W) (optional) (2 byte)
+//
+// Mac Learning Depth
+// NOTE 2 – If this attribute is not zero, its value overrides the value set in the MAC learning
+// depth attribute of the MAC bridge service profile.
+//
+type MacBridgePortConfigurationData struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ macbridgeportconfigurationdataBME = &ManagedEntityDefinition{
+ Name: "MacBridgePortConfigurationData",
+ ClassID: 47,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0XFFF8,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, false, 0),
+ 1: Uint16Field("BridgeIdPointer", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 1),
+ 2: ByteField("PortNum", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 2),
+ 3: ByteField("TpType", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 3),
+ 4: Uint16Field("TpPointer", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 4),
+ 5: Uint16Field("PortPriority", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 5),
+ 6: Uint16Field("PortPathCost", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 6),
+ 7: ByteField("PortSpanningTreeInd", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 7),
+ 8: ByteField("Deprecated1", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, true, 8),
+ 9: ByteField("Deprecated2", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, true, 9),
+ 10: MultiByteField("PortMacAddress", 6, nil, mapset.NewSetWith(Read), false, false, true, false, 10),
+ 11: Uint16Field("OutboundTdPointer", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 11),
+ 12: Uint16Field("InboundTdPointer", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 12),
+ 13: ByteField("MacLearningDepth", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 13),
+ },
+ }
+}
+
+// NewMacBridgePortConfigurationData (class ID 47 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewMacBridgePortConfigurationData(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(macbridgeportconfigurationdataBME, params...)
+}