diff --git a/vendor/github.com/cboling/omci/generated/omcidefs.go b/vendor/github.com/cboling/omci/generated/omcidefs.go
new file mode 100644
index 0000000..9dbc5ee
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/omcidefs.go
@@ -0,0 +1,277 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import (
+	"fmt"
+	"github.com/deckarep/golang-set"
+	"github.com/google/gopacket"
+)
+
+// MsgType represents a OMCI message-type
+type MsgType byte
+
+// MsgType represents the status field in a OMCI Response frame
+type Results byte
+
+// AttributeAccess represents the access allowed to an Attribute.  Some MEs
+// are instantiated by the ONU autonomously. Others are instantiated on
+// explicit request of the OLT via a create command, and a few ME types may
+// be instantiated in either way, depending on the ONU architecture or
+// circumstances.
+//
+// Attributes of an ME that is auto-instantiated by the ONU can be read (R),
+// write (W), or read, write (R, W). On the other hand, attributes of a ME
+// that is instantiated by the OLT can be either (R), (W), (R, W),
+// (R, set by create) or (R, W, set by create).
+type AttributeAccess byte
+
+// ClassID is a 16-bit value that uniquely defines a Managed Entity clas
+// from the ITU-T G.988 specification.
+type ClassID uint16
+
+func (cid ClassID) String() string {
+	if entity, err := LoadManagedEntityDefinition(cid); err == nil {
+		return fmt.Sprintf("[%s] (%d/%#x)",
+			entity.GetManagedEntityDefinition().GetName(), uint16(cid), uint16(cid))
+	}
+	return fmt.Sprintf("unknown ClassID")
+}
+
+const (
+	// AK (Bit 6), indicates whether this message is an AK to an action request.
+	// If a message is an AK, this bit is set to 1. If the message is not a
+	// response to a command, this bit is set to 0. In messages sent by the OLT,
+	// this bit is always 0.
+	AK byte = 0x20
+
+	// AR (Bit 7), acknowledge request, indicates whether the message requires an
+	// AK. An AK is a response to an action request, not a link layer handshake.
+	// If an AK is expected, this bit is set to 1. If no AK is expected, this bit
+	// is 0. In messages sent by the ONU, this bit is always 0
+	AR byte = 0x40
+
+	// MsgTypeMask provides a mask to get the base message type
+	MsgTypeMask = 0x1F
+)
+
+const (
+	// Message Types
+	Create                MsgType = 4
+	Delete                MsgType = 6
+	Set                   MsgType = 8
+	Get                   MsgType = 9
+	GetAllAlarms          MsgType = 11
+	GetAllAlarmsNext      MsgType = 12
+	MibUpload             MsgType = 13
+	MibUploadNext         MsgType = 14
+	MibReset              MsgType = 15
+	AlarmNotification     MsgType = 16
+	AttributeValueChange  MsgType = 17
+	Test                  MsgType = 18
+	StartSoftwareDownload MsgType = 19
+	DownloadSection       MsgType = 20
+	EndSoftwareDownload   MsgType = 21
+	ActivateSoftware      MsgType = 22
+	CommitSoftware        MsgType = 23
+	SynchronizeTime       MsgType = 24
+	Reboot                MsgType = 25
+	GetNext               MsgType = 26
+	TestResult            MsgType = 27
+	GetCurrentData        MsgType = 28
+	SetTable              MsgType = 29 // Defined in Extended Message Set Only
+)
+
+func (mt MsgType) String() string {
+	switch mt {
+	default:
+		return "Unknown"
+	case Create:
+		return "Create"
+	case Delete:
+		return "Delete"
+	case Set:
+		return "Set"
+	case Get:
+		return "Get"
+	case GetAllAlarms:
+		return "Get All Alarms"
+	case GetAllAlarmsNext:
+		return "Get All Alarms Next"
+	case MibUpload:
+		return "MIB Upload"
+	case MibUploadNext:
+		return "MIB Upload Next"
+	case MibReset:
+		return "MIB Reset"
+	case AlarmNotification:
+		return "Alarm Notification"
+	case AttributeValueChange:
+		return "Attribute Value Change"
+	case Test:
+		return "Test"
+	case StartSoftwareDownload:
+		return "Start Software Download"
+	case DownloadSection:
+		return "Download Section"
+	case EndSoftwareDownload:
+		return "EndSoftware Download"
+	case ActivateSoftware:
+		return "Activate Software"
+	case CommitSoftware:
+		return "Commit Software"
+	case SynchronizeTime:
+		return "Synchronize Time"
+	case Reboot:
+		return "Reboot"
+	case GetNext:
+		return "Get Next"
+	case TestResult:
+		return "Test Result"
+	case GetCurrentData:
+		return "Get Current Data"
+	case SetTable:
+		return "Set Table"
+	}
+}
+
+var allNotificationTypes = [...]MsgType{
+	AlarmNotification,
+	AttributeValueChange,
+	TestResult,
+}
+
+// SupportsMsgType returns true if the managed entity supports the desired
+// Message Type / action
+func SupportsMsgType(entity IManagedEntityDefinition, msgType MsgType) bool {
+	return entity.GetMessageTypes().Contains(msgType)
+}
+
+func IsAutonomousNotification(mt MsgType) bool {
+	for _, m := range allNotificationTypes {
+		if mt == m {
+			return true
+		}
+	}
+	return false
+}
+
+const (
+	// Response status codes
+	Success          Results = 0 // command processed successfully
+	ProcessingError  Results = 1 // command processing error
+	NotSupported     Results = 2 // command not supported
+	ParameterError   Results = 3 // parameter error
+	UnknownEntity    Results = 4 // unknown managed entity
+	UnknownInstance  Results = 5 // unknown managed entity instance
+	DeviceBusy       Results = 6 // device busy
+	InstanceExists   Results = 7 // instance exists
+	AttributeFailure Results = 9 // Attribute(s) failed or unknown
+)
+
+func (rc Results) String() string {
+	switch rc {
+	default:
+		return "Unknown"
+	case Success:
+		return "Success"
+	case ProcessingError:
+		return "Processing Error"
+	case NotSupported:
+		return "Not Supported"
+	case ParameterError:
+		return "Parameter Error"
+	case UnknownEntity:
+		return "Unknown Entity"
+	case UnknownInstance:
+		return "Unknown Instance"
+	case DeviceBusy:
+		return "Device Busy"
+	case InstanceExists:
+		return "Instance Exists"
+	case AttributeFailure:
+		return "Attribute Failure"
+	}
+}
+
+const (
+	// Access allowed on a Managed Entity attribute
+	Read AttributeAccess = 1 << iota
+	Write
+	SetByCreate
+)
+
+func (access AttributeAccess) String() string {
+	switch access {
+	default:
+		return "Unknown"
+	case Read:
+		return "Read"
+	case Write:
+		return "Write"
+	case SetByCreate:
+		return "SetByCreate"
+	case Read | Write:
+		return "Read/Write"
+	case Read | SetByCreate:
+		return "Read/SetByCreate"
+	case Write | SetByCreate:
+		return "Write/SetByCreate"
+	case Read | Write | SetByCreate:
+		return "Read/Write/SetByCreate"
+	}
+}
+
+// SupportsAttributeAccess returns true if the managed entity attribute
+// supports the desired access
+func SupportsAttributeAccess(attr *AttributeDefinition, acc AttributeAccess) bool {
+	return attr.GetAccess().Contains(acc)
+}
+
+type IManagedEntityDefinition interface {
+	GetName() string
+	GetClassID() ClassID
+	GetMessageTypes() mapset.Set
+	GetAllowedAttributeMask() uint16
+	GetAttributeDefinitions() *AttributeDefinitionMap
+
+	DecodeAttributes(uint16, []byte, gopacket.PacketBuilder, byte) (AttributeValueMap, error)
+	SerializeAttributes(AttributeValueMap, uint16, gopacket.SerializeBuffer, byte, int) error
+}
+
+type IManagedEntity interface {
+	IManagedEntityDefinition
+	GetManagedEntityDefinition() IManagedEntityDefinition
+
+	GetEntityID() uint16
+	SetEntityID(uint16) error
+
+	GetAttributeMask() uint16
+
+	GetAttributeValueMap() *AttributeValueMap
+	GetAttribute(string) (interface{}, error)
+	GetAttributeByIndex(uint) (interface{}, error)
+
+	SetAttribute(string, interface{}) error
+	SetAttributeByIndex(uint, interface{}) error
+
+	DeleteAttribute(string) error
+	DeleteAttributeByIndex(uint) error
+}