Committing vendored dependencies and generated protos
Change-Id: I349c149b513d9de7d9f60bde2c954a939da2fc54
diff --git a/vendor/github.com/cboling/omci/generated/physicalpathterminationpointmocauni.go b/vendor/github.com/cboling/omci/generated/physicalpathterminationpointmocauni.go
new file mode 100644
index 0000000..29ab438
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/physicalpathterminationpointmocauni.go
@@ -0,0 +1,154 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const PhysicalPathTerminationPointMocaUniClassId ClassID = ClassID(162)
+
+var physicalpathterminationpointmocauniBME *ManagedEntityDefinition
+
+// PhysicalPathTerminationPointMocaUni (class ID #162)
+// This ME represents an MoCA UNI, where physical paths terminate and physical path level functions
+// are performed.
+//
+// The ONU automatically creates an instance of this ME per port as follows.
+//
+// • When the ONU has MoCA ports built into its factory configuration.
+//
+// • When a cardholder is provisioned to expect a circuit pack of the MoCA type.
+//
+// • When a cardholder provisioned for plug-and-play is equipped with a circuit pack of the MoCA
+// type. Note that the installation of a plug-and-play card may indicate the presence of MoCA ports
+// via equipment ID as well as its type, and indeed may cause the ONU to instantiate a port-mapping
+// package that specifies MoCA ports.
+//
+// The ONU automatically deletes instances of this ME when a cardholder is neither provisioned to
+// expect an MoCA circuit pack, nor is it equipped with an MoCA circuit pack.
+//
+// Relationships
+// An instance of this ME is associated with each real or pre-provisioned MoCA port.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. This 2 byte
+// number is directly associated with the physical position of the UNI. The first byte is the slot
+// ID (defined in clause 9.1.5). The second byte is the port ID, with the range 1..255. (R)
+// (mandatory) (2 bytes)
+//
+// Loopback Configuration
+// Upon ME instantiation, the ONU sets this attribute to 0. (R, W) (optional) (1 byte)
+//
+// Administrative State
+// Administrative state: This attribute locks (1) and unlocks (0) the functions performed by this
+// ME. Administrative state is further described in clause A.1.6. (R, W) (mandatory) (1 byte)
+//
+// Operational State
+// Operational state: This attribute indicates whether the ME is capable of performing its
+// function. Valid values are enabled (0) and disabled (1). (R) (optional) (1 byte)
+//
+// Max Frame Size
+// Max frame size: This attribute denotes the maximum frame size allowed across this interface.
+// Upon ME instantiation, the ONU sets this attribute to 1518. (R, W) (mandatory) (2 bytes)
+//
+// Arc
+// ARC: See clause A.1.4.3. (R, W) (optional) (1 byte)
+//
+// Arc Interval
+// ARC interval: See clause A.1.4.3. (R, W) (optional) (1 byte)
+//
+// Pppoe Filter
+// PPPoE filter: This attribute controls filtering of PPPoE packets on this MoCA port. When its
+// value is 1, all packets other than PPPoE packets are discarded. The default 0 accepts packets of
+// all types. (R, W) (optional) (1 byte)
+//
+// Network Status
+// (R) (mandatory) (1 byte)
+//
+// Password
+// Password: This attribute specifies the MoCA encryption key. It is an ASCII string of 17 decimal
+// digits. Upon ME instantiation, the ONU sets this attribute to 17 null bytes. (R, W) (mandatory)
+// (17 bytes)
+//
+// Privacy Enabled
+// Privacy enabled: This attribute activates (1) link-layer security. The default value 0
+// deactivates it. (R, W) (mandatory) (1 byte)
+//
+// Minimum Bandwidth Alarm Threshold
+// Minimum bandwidth alarm threshold: This attribute specifies the minimum desired PHY link
+// bandwidth between two nodes. If the actual bandwidth is lower, an LL alarm is declared. Valid
+// values are 0 to 0x0410 (260 Mbit/s) in 0.25 Mbit/s increments. The default value is 0x02D0
+// (180 Mbit/s). The value 0 disables the threshold. (R, W) (optional) (2 bytes)
+//
+// Frequency Mask
+// Frequency mask: This attribute is a bit map of the centre frequencies that the interface is
+// permitted to use, where each bit represents a centre frequency. The LSB (b[1]) corresponds to
+// centre frequency 800 MHz. The next significant bit (b[2]) corresponds to centre frequency
+// 825 MHz. The 28th bit (b[28]) corresponds to centre frequency 1500 MHz. The four MSBs are not
+// used. (R, W) (optional) (4 bytes)
+//
+// Rf Channel
+// RF channel: This attribute reports the frequency to which the MoCA interface is currently tuned,
+// in megahertz. (R) (mandatory) (2 bytes)
+//
+// Last Operational Frequency
+// Last operational frequency: This attribute reports the frequency to which the MoCA interface was
+// tuned when last operational, in megahertz. (R) (mandatory) (2 bytes)
+//
+type PhysicalPathTerminationPointMocaUni struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ physicalpathterminationpointmocauniBME = &ManagedEntityDefinition{
+ Name: "PhysicalPathTerminationPointMocaUni",
+ ClassID: 162,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0XFFFC,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read), false, false, false, false, 0),
+ 1: ByteField("LoopbackConfiguration", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 1),
+ 2: ByteField("AdministrativeState", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 2),
+ 3: ByteField("OperationalState", 0, mapset.NewSetWith(Read), true, false, true, false, 3),
+ 4: Uint16Field("MaxFrameSize", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 4),
+ 5: ByteField("Arc", 0, mapset.NewSetWith(Read, Write), true, false, true, false, 5),
+ 6: ByteField("ArcInterval", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 6),
+ 7: ByteField("PppoeFilter", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 7),
+ 8: ByteField("NetworkStatus", 0, mapset.NewSetWith(Read), false, false, false, false, 8),
+ 9: MultiByteField("Password", 17, nil, mapset.NewSetWith(Read, Write), false, false, false, false, 9),
+ 10: ByteField("PrivacyEnabled", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 10),
+ 11: Uint16Field("MinimumBandwidthAlarmThreshold", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 11),
+ 12: Uint32Field("FrequencyMask", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 12),
+ 13: Uint16Field("RfChannel", 0, mapset.NewSetWith(Read), false, false, false, false, 13),
+ 14: Uint16Field("LastOperationalFrequency", 0, mapset.NewSetWith(Read), false, false, false, false, 14),
+ },
+ }
+}
+
+// NewPhysicalPathTerminationPointMocaUni (class ID 162 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewPhysicalPathTerminationPointMocaUni(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(physicalpathterminationpointmocauniBME, params...)
+}