Committing vendored dependencies and generated protos
Change-Id: I349c149b513d9de7d9f60bde2c954a939da2fc54
diff --git a/vendor/github.com/cboling/omci/generated/physicalpathterminationpointpotsuni.go b/vendor/github.com/cboling/omci/generated/physicalpathterminationpointpotsuni.go
new file mode 100644
index 0000000..8264200
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/physicalpathterminationpointpotsuni.go
@@ -0,0 +1,163 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const PhysicalPathTerminationPointPotsUniClassId ClassID = ClassID(53)
+
+var physicalpathterminationpointpotsuniBME *ManagedEntityDefinition
+
+// PhysicalPathTerminationPointPotsUni (class ID #53)
+// This ME represents a POTS UNI in the ONU, where a physical path terminates and physical path
+// level functions (analogue telephony) are performed.
+//
+// The ONU automatically creates an instance of this ME per port as follows.
+//
+// • When the ONU has POTS ports built into its factory configuration.
+//
+// • When a cardholder is provisioned to expect a circuit pack of the POTS type.
+//
+// • When a cardholder provisioned for plug-and-play is equipped with a circuit pack of the POTS
+// type. Note that the installation of a plug-and-play card may indicate the presence of POTS ports
+// via equipment ID as well as type, and indeed may cause the ONU to instantiate a port-mapping
+// package that specifies POTS ports.
+//
+// The ONU automatically deletes instances of this ME when a cardholder is neither provisioned to
+// expect a POTS circuit pack, nor is it equipped with a POTS circuit pack.
+//
+// Relationships
+// An instance of this ME is associated with each real or pre-provisioned POTS port. Either a SIP
+// or a VoIP voice CTP links to the POTS UNI. Status is available from a VoIP line status ME, and
+// RTP and call control PM may be collected on this point.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. This 2 byte
+// number indicates the physical position of the UNI. The first byte is the slot ID (defined in
+// clause 9.1.5). The second byte is the port ID, with the range 1..255. (R) (mandatory) (2 bytes)
+//
+// Administrative State
+// When the administrative state is set to lock, all user functions of this UNI are blocked, and
+// alarms, TCAs and AVCs for this ME and all dependent MEs are no longer generated. Selection of a
+// default value for this attribute is outside the scope of this Recommendation. (R, W) (mandatory)
+// (1 byte)
+//
+// Deprecated
+// Deprecated: This attribute is not used and should not be supported. (R, W) (optional) (2 bytes)
+//
+// Arc
+// ARC: See clause A.1.4.3. (R, W) (optional) (1 byte)
+//
+// Arc Interval
+// ARC interval: See clause A.1.4.3. (R, W) (optional) (1 byte)
+//
+// Impedance
+// where C1, R1, and R2 are related as shown in Figure 9.9.1-1. Upon ME instantiation, the ONU sets
+// this attribute to 0. (R, W) (optional) (1 byte)
+//
+// Transmission Path
+// Transmission path: This attribute allows setting the POTS UNI either to full-time on-hook
+// transmission (0) or part-time on-hook transmission (1). Upon ME instantiation, the ONU sets this
+// attribute to 0. (R, W) (optional) (1 byte)
+//
+// Rx Gain
+// Rx gain: This attribute specifies a gain value for the received signal in the form of a 2s
+// complement number. Valid values are –120 (12.0 dB) to 60 (+6.0 dB). The direction of the
+// affected signal is in the D to A direction, towards the telephone set. Upon ME instantiation,
+// the ONU sets this attribute to 0. (R, W) (optional) (1 byte)
+//
+// Tx Gain
+// Tx gain: This attribute specifies a gain value for the transmit signal in the form of a 2s
+// complement number. Valid values are –120 (12.0 dB) to 60 (+6.0 dB). The direction of the
+// affected signal is in the A to D direction, away from the telephone set. Upon ME instantiation,
+// the ONU sets this attribute to 0. (R, W) (optional) (1 byte)
+//
+// Operational State
+// Operational state: This attribute indicates whether the ME is capable of performing its
+// function. Valid values are enabled (0) and disabled (1). (R) (optional) (1 byte)
+//
+// Hook State
+// Hook state: This attribute indicates the current state of the subscriber line: 0 = on hook, 1 =
+// off hook (R) (optional) (1 byte)
+//
+// Pots Holdover Time
+// POTS holdover time: This attribute determines the time during which the POTS loop voltage is
+// held up when a LOS or softswitch connectivity is detected (please refer to the following table
+// for description of behaviours).. After the specified time elapses, the ONU drops the loop
+// voltage, and may thereby cause premises intrusion alarm or fire panel circuits to go active.
+// When the ONU ranges successfully on the PON or softswitch connectivity is restored, it restores
+// the POTS loop voltage immediately and resets the timer to zero. The attribute is expressed in
+// seconds. The default value 0 selects the vendor's factory policy. (R, W) (optional) (2 bytes)
+//
+// Nominal Feed Voltage
+// Nominal feed voltage: This attribute indicates the designed nominal feed voltage of the POTS
+// loop. It is an absolute value with resolution 1 V. This attribute does not represent the actual
+// voltage measured on the loop, which is available through the test command. (R, W) (optional)
+// (1 byte)
+//
+// Loss Of Softswitch
+// Loss of softswitch: This Boolean attribute controls whether the T/R holdover initiation
+// criteria. False disables loss of softswitch connectivity detection as criteria for initiating
+// the POTS holdover timer. True enables loss of softswitch connectivity detection as criteria for
+// initiating the POTS holdover timer. This attribute is optional (if not implemented, the POTS
+// holdover time is triggered on a LOS when POTS holdover is greater than zero). (R, W) (optional)
+// (1 byte)
+//
+type PhysicalPathTerminationPointPotsUni struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ physicalpathterminationpointpotsuniBME = &ManagedEntityDefinition{
+ Name: "PhysicalPathTerminationPointPotsUni",
+ ClassID: 53,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ Test,
+ ),
+ AllowedAttributeMask: 0XFFF8,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read), false, false, false, false, 0),
+ 1: ByteField("AdministrativeState", 0, mapset.NewSetWith(Read, Write), true, false, false, false, 1),
+ 2: Uint16Field("Deprecated", 0, mapset.NewSetWith(Read, Write), false, false, true, true, 2),
+ 3: ByteField("Arc", 0, mapset.NewSetWith(Read, Write), true, false, true, false, 3),
+ 4: ByteField("ArcInterval", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 4),
+ 5: ByteField("Impedance", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 5),
+ 6: ByteField("TransmissionPath", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 6),
+ 7: ByteField("RxGain", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 7),
+ 8: ByteField("TxGain", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 8),
+ 9: ByteField("OperationalState", 0, mapset.NewSetWith(Read), true, false, true, false, 9),
+ 10: ByteField("HookState", 0, mapset.NewSetWith(Read), false, false, true, false, 10),
+ 11: Uint16Field("PotsHoldoverTime", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 11),
+ 12: ByteField("NominalFeedVoltage", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 12),
+ 13: ByteField("LossOfSoftswitch", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 13),
+ },
+ }
+}
+
+// NewPhysicalPathTerminationPointPotsUni (class ID 53 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewPhysicalPathTerminationPointPotsUni(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(physicalpathterminationpointpotsuniBME, params...)
+}