diff --git a/vendor/github.com/cboling/omci/generated/pseudowiremaintenanceprofile.go b/vendor/github.com/cboling/omci/generated/pseudowiremaintenanceprofile.go
new file mode 100644
index 0000000..922553e
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/pseudowiremaintenanceprofile.go
@@ -0,0 +1,154 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const PseudowireMaintenanceProfileClassId ClassID = ClassID(284)
+
+var pseudowiremaintenanceprofileBME *ManagedEntityDefinition
+
+// PseudowireMaintenanceProfile (class ID #284)
+//	The pseudowire maintenance profile permits the configuration of pseudowire service exception
+//	handling. It is created and deleted by the OLT.
+//
+//	The settings, and indeed existence, of a pseudowire maintenance profile affect the behaviour of
+//	the pseudowire PM history data ME only in establishing criteria for counting SESs, but in no
+//	other way. The pseudowire maintenance profile primarily affects the alarms declared by the
+//	subscribing pseudowire TP.
+//
+//	Relationships
+//		One or more instances of the pseudowire TP may point to an instance of the pseudowire
+//		maintenance profile. If the pseudowire TP does not refer to a pseudowire maintenance profile,
+//		the ONU's default exception handling is implied.
+//
+//	Attributes
+//		Managed Entity Id
+//			Managed entity ID: This attribute uniquely identifies each instance of this ME. The value 0 is
+//			reserved. (R, setbycreate) (mandatory) (2 bytes)
+//
+//		Jitter Buffer Maximum Depth
+//			Jitter buffer maximum depth: This attribute specifies the desired maximum depth of the playout
+//			buffer in the PSN to the TDM direction. The value is expressed as a multiple of the 125 μs frame
+//			rate. The default value 0 selects the ONU's internal policy. (R, W, setbycreate) (optional)
+//			(2 bytes)
+//
+//		Jitter Buffer Desired Depth
+//			Jitter buffer desired depth: This attribute specifies the desired nominal fill depth of the
+//			playout buffer in the PSN to the TDM direction. The value is expressed as a multiple of the
+//			125 μs frame rate. The default value 0 selects the ONU's internal policy. (R, W, setbycreate)
+//			(optional) (2 bytes)
+//
+//		Fill Policy
+//			(R, W, setbycreate) (optional) (1 byte)
+//
+//		Misconnected Packets Declaration Policy
+//			Misconnected packets declaration policy: (R, W, setbycreate) (optional) (1 byte)
+//
+//		Misconnected Packets Clear Policy
+//			Misconnected packets clear policy: (R, W, setbycreate) (optional) (1 byte)
+//
+//		Loss Of Packets Declaration Policy
+//			Loss of packets declaration policy: (R, W, setbycreate) (optional) (1 byte)
+//
+//		Loss Of Packets Clear Policy
+//			Loss of packets clear policy: (R, W, setbycreate) (optional) (1 byte)
+//
+//		Buffer Overrun_Underrun Declaration Policy
+//			Buffer overrun/underrun declaration policy: (R, W, setbycreate) (optional) (1 byte)
+//
+//		Buffer Overrun_Underrun Clear Policy
+//			Buffer overrun/underrun clear policy: (R, W, setbycreate) (optional) (1 byte)
+//
+//		Malformed Packets Declaration Policy
+//			Malformed packets declaration policy: (R, W, setbycreate) (optional) (1 byte)
+//
+//		Malformed Packets Clear Policy
+//			Malformed packets clear policy: (R, W, setbycreate) (optional) (1 byte)
+//
+//		R_Bit Transmit Set Policy
+//			R-bit transmit set policy: This attribute defines the number of consecutive lost packets that
+//			causes the transmitted R bit to be set in the TDM to the PSN direction, indicating lost packets
+//			to the far end. The default value 0 selects the ONU's internal policy. (R, W, setbycreate)
+//			(optional) (1 byte)
+//
+//		R_Bit Transmit Clear Policy
+//			R-bit transmit clear policy: This attribute defines the number of consecutive valid packets that
+//			causes the transmitted R bit to be cleared in the TDM to the PSN direction, removing the remote
+//			failure indication to the far end. The default value 0 selects the ONU's internal policy. (R, W,
+//			setbycreate) (optional) (1 byte)
+//
+//		R_Bit Receive Policy
+//			(R, W, setbycreate) (optional) (1 byte)
+//
+//		L Bit Receive Policy
+//			(R, W, setbycreate) (optional) (1 byte)
+//
+//		Ses Threshold
+//			SES threshold: Number of lost, malformed or otherwise unusable packets expected in the PSN to
+//			the TDM direction within a 1 s interval that causes an SES to be counted. Stray packets do not
+//			count towards an SES, nor do packets whose L bit is set at the far end. The value 0 specifies
+//			that the ONU uses its internal default, which is not necessarily the same as the recommended
+//			default value 3. (R, W, set-by-create) (optional) (2 bytes)
+//
+type PseudowireMaintenanceProfile struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	pseudowiremaintenanceprofileBME = &ManagedEntityDefinition{
+		Name:    "PseudowireMaintenanceProfile",
+		ClassID: 284,
+		MessageTypes: mapset.NewSetWith(
+			Create,
+			Delete,
+			Get,
+			Set,
+		),
+		AllowedAttributeMask: 0XFFFF,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, false, 0),
+			1:  Uint16Field("JitterBufferMaximumDepth", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 1),
+			2:  Uint16Field("JitterBufferDesiredDepth", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 2),
+			3:  ByteField("FillPolicy", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 3),
+			4:  ByteField("MisconnectedPacketsDeclarationPolicy", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 4),
+			5:  ByteField("MisconnectedPacketsClearPolicy", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 5),
+			6:  ByteField("LossOfPacketsDeclarationPolicy", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 6),
+			7:  ByteField("LossOfPacketsClearPolicy", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 7),
+			8:  ByteField("BufferOverrunUnderrunDeclarationPolicy", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 8),
+			9:  ByteField("BufferOverrunUnderrunClearPolicy", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 9),
+			10: ByteField("MalformedPacketsDeclarationPolicy", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 10),
+			11: ByteField("MalformedPacketsClearPolicy", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 11),
+			12: ByteField("RBitTransmitSetPolicy", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 12),
+			13: ByteField("RBitTransmitClearPolicy", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 13),
+			14: ByteField("RBitReceivePolicy", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 14),
+			15: ByteField("LBitReceivePolicy", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 15),
+			16: Uint16Field("SesThreshold", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 16),
+		},
+	}
+}
+
+// NewPseudowireMaintenanceProfile (class ID 284 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewPseudowireMaintenanceProfile(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(pseudowiremaintenanceprofileBME, params...)
+}