Committing vendored dependencies and generated protos
Change-Id: I349c149b513d9de7d9f60bde2c954a939da2fc54
diff --git a/vendor/github.com/cboling/omci/generated/rtppseudowireparameters.go b/vendor/github.com/cboling/omci/generated/rtppseudowireparameters.go
new file mode 100644
index 0000000..018ced4
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/rtppseudowireparameters.go
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const RtpPseudowireParametersClassId ClassID = ClassID(283)
+
+var rtppseudowireparametersBME *ManagedEntityDefinition
+
+// RtpPseudowireParameters (class ID #283)
+// If a pseudowire service uses RTP, the RTP pseudowire parameters ME provides configuration
+// information for the RTP layer. Instances of this ME are created and deleted by the OLT. The use
+// of RTP on a pseudowire is optional, and is determined by the existence of the RTP pseudowire
+// parameters ME.
+//
+// Relationships
+// An instance of the RTP pseudowire parameters ME may exist for each pseudowire TP ME, to which it
+// is implicitly bound by a common ME ID.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
+// identical ID, this ME is implicitly linked to an instance of the pseudowire TP ME. (R,
+// setbycreate) (mandatory) (2 bytes)
+//
+// Clock Reference
+// Clock reference: This attribute specifies the frequency of the common timing reference, in
+// multiples of 8 kHz. (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Rtp Timestamp Mode
+// (R, W, setbycreate) (mandatory) (1 byte)
+//
+// Ptype
+// PTYPE: This attribute specifies the RTP payload type in the TDM to the PSN direction. It
+// comprises two 1 byte values. The first is for the payload channel, the second, for the optional
+// separate signalling channel. Assignable PTYPEs lie in the dynamic range 96..127. If signalling
+// is not transported in its own channel, the second value should be set to 0. (R, W, setbycreate)
+// (mandatory) (2 bytes)
+//
+// Ssrc
+// SSRC: This attribute specifies the RTP synchronization source in the TDM to the PSN direction.
+// It comprises two 4 byte values. The first is for the payload channel, the second, for the
+// optional separate signalling channel. If signalling is not transported in its own channel, the
+// second value should be set to 0. (R, W, setbycreate) (mandatory) (8 bytes)
+//
+// Expected Ptype
+// Expected PTYPE: This attribute specifies the RTP payload type in the PSN to the TDM direction.
+// The received payload type may be used to detect malformed packets. It comprises two 1 byte
+// values. The first is for the payload channel, the second, for the optional separate signalling
+// channel. To disable either or both of the check functions, set the corresponding value to its
+// default value 0. (R, W, setbycreate) (optional) (2 bytes)
+//
+// Expected Ssrc
+// Expected SSRC: This attribute specifies the RTP synchronization source in the PSN to the TDM
+// direction. The received SSRC may be used to detect misconnection (stray packets). It comprises
+// two 4 byte values. The first is for the payload channel, the second, for the optional separate
+// signalling channel. To disable either or both of the check functions, set the corresponding
+// value to its default value 0. (R, W, setbycreate) (optional) (8 bytes)
+//
+type RtpPseudowireParameters struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ rtppseudowireparametersBME = &ManagedEntityDefinition{
+ Name: "RtpPseudowireParameters",
+ ClassID: 283,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0XFC00,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, false, 0),
+ 1: Uint16Field("ClockReference", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 1),
+ 2: ByteField("RtpTimestampMode", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 2),
+ 3: Uint16Field("Ptype", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 3),
+ 4: Uint64Field("Ssrc", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 4),
+ 5: Uint16Field("ExpectedPtype", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 5),
+ 6: Uint64Field("ExpectedSsrc", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, true, false, 6),
+ },
+ }
+}
+
+// NewRtpPseudowireParameters (class ID 283 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewRtpPseudowireParameters(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(rtppseudowireparametersBME, params...)
+}