Committing vendored dependencies and generated protos
Change-Id: I349c149b513d9de7d9f60bde2c954a939da2fc54
diff --git a/vendor/github.com/cboling/omci/generated/softwareimage.go b/vendor/github.com/cboling/omci/generated/softwareimage.go
new file mode 100644
index 0000000..ff90b00
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/softwareimage.go
@@ -0,0 +1,138 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const SoftwareImageClassId ClassID = ClassID(7)
+
+var softwareimageBME *ManagedEntityDefinition
+
+// SoftwareImage (class ID #7)
+// This ME models an executable software image stored in the ONU (documented here as its
+// fundamental usage). It may also be used to represent an opaque vendor-specific file
+// (vendorspecific usage).
+//
+// Fundamental usage
+//
+// The ONU automatically creates two instances of this ME upon the creation of each ME that
+// contains independently manageable software, either the ONU itself or an individual circuit pack.
+// It populates ME attributes according to data within the ONU or the circuit pack.
+//
+// Some pluggable equipment may not contain software. Others may contain software that is
+// intrinsically bound to the ONU's own software image. No software image ME need exist for such
+// equipment, though it may be convenient for the ONU to create them to support software version
+// audit from the OLT. In this case, the dependent MEs would support only the get action.
+//
+// A slot may contain various equipment over its lifetime, and if software image MEs exist, the ONU
+// must automatically create and delete them as the equipped configuration changes. The identity of
+// the software image is tied to the cardholder.
+//
+// When an ONU controller packs are duplicated, each can be expected to contain two software image
+// MEs, managed through reference to the individual controller packs themselves. When this occurs,
+// the ONU should not have a global pair of software images MEs (instance 0), since an action
+// (download, activate, commit) directed to instance 0 would be ambiguous.
+//
+// Relationships
+// Two instances of the software image ME are associated with each instance of the ONU or
+// cardholder whose software is independently managed.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. The first byte
+// indicates the physical location of the equipment hosting the software image, either the ONU (0)
+// or a cardholder (1..254). The second byte distinguishes between the two software image ME
+// instances (0..1). (R) (mandatory) (2 bytes)
+//
+// Version
+// Version: This string attribute identifies the version of the software. (R) (mandatory)
+// (14 bytes)
+//
+// Is Committed
+// Is committed: This attribute indicates whether the associated software image is committed (1) or
+// uncommitted (0). By definition, the committed software image is loaded and executed upon reboot
+// of the ONU or circuit pack. During normal operation, one software image is always committed,
+// while the other is uncommitted. Under no circumstances are both software images allowed to be
+// committed at the same time. On the other hand, both software images could be uncommitted at the
+// same time if both were invalid. Upon ME instantiation, instance 0 is initialized to committed,
+// while instance 1 is initialized to uncommitted (i.e., the ONU ships from the factory with image
+// 0 committed). (R) (mandatory) (1 byte)
+//
+// Is Active
+// Is active: This attribute indicates whether the associated software image is active (1) or
+// inactive (0). By definition, the active software image is one that is currently loaded and
+// executing in the ONU or circuit pack. Under normal operation, one software image is always
+// active while the other is inactive. Under no circumstances are both software images allowed to
+// be active at the same time. On the other hand, both software images could be inactive at the
+// same time if both were invalid. (R) (mandatory) (1 byte)
+//
+// Is Valid
+// Is valid: This attribute indicates whether the associated software image is valid (1) or invalid
+// (0). By definition, a software image is valid if it has been verified to be an executable code
+// image. The verification mechanism is not subject to standardization; however, it should include
+// at least a data integrity check [e.g., a cyclic redundancy check (CRC)] of the entire code
+// image. Upon ME instantiation or software download completion, the ONU validates the associated
+// code image and sets this attribute according to the result. (R) (mandatory) (1 byte)
+//
+// Product Code
+// Product code: This attribute provides a way for a vendor to indicate product code information on
+// a file. It is a character string, padded with trailing nulls if it is shorter than 25 bytes. (R)
+// (optional) (25 bytes)
+//
+// Image Hash
+// Image hash: This attribute is an MD5 hash of the software image. It is computed at completion of
+// the end download action. (R) (optional) (16 bytes)
+//
+type SoftwareImage struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ softwareimageBME = &ManagedEntityDefinition{
+ Name: "SoftwareImage",
+ ClassID: 7,
+ MessageTypes: mapset.NewSetWith(
+ ActivateSoftware,
+ CommitSoftware,
+ DownloadSection,
+ EndSoftwareDownload,
+ Get,
+ StartSoftwareDownload,
+ ),
+ AllowedAttributeMask: 0XFC00,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read), false, false, false, false, 0),
+ 1: MultiByteField("Version", 14, nil, mapset.NewSetWith(Read), true, false, false, false, 1),
+ 2: ByteField("IsCommitted", 0, mapset.NewSetWith(Read), true, false, false, false, 2),
+ 3: ByteField("IsActive", 0, mapset.NewSetWith(Read), true, false, false, false, 3),
+ 4: ByteField("IsValid", 0, mapset.NewSetWith(Read), true, false, false, false, 4),
+ 5: MultiByteField("ProductCode", 25, nil, mapset.NewSetWith(Read), true, false, true, false, 5),
+ 6: MultiByteField("ImageHash", 16, nil, mapset.NewSetWith(Read), true, false, true, false, 6),
+ },
+ }
+}
+
+// NewSoftwareImage (class ID 7 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewSoftwareImage(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(softwareimageBME, params...)
+}