diff --git a/vendor/github.com/cboling/omci/generated/vdsl2lineconfigurationextensions3.go b/vendor/github.com/cboling/omci/generated/vdsl2lineconfigurationextensions3.go
new file mode 100644
index 0000000..b566e20
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/vdsl2lineconfigurationextensions3.go
@@ -0,0 +1,150 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const Vdsl2LineConfigurationExtensions3ClassId ClassID = ClassID(410)
+
+var vdsl2lineconfigurationextensions3BME *ManagedEntityDefinition
+
+// Vdsl2LineConfigurationExtensions3 (class ID #410)
+//	This ME extends the xDSL line configuration MEs.
+//
+//	An instance of this ME is created and deleted by the OLT.
+//
+//	Relationships
+//		An instance of this ME may be associated with zero or more instances of an xDSL UNI.////		The overall xDSL line configuration profile is modelled in several parts, all of which are
+//		associated together through a common ME ID (the client PPTP xDSL UNI part 1 has a single
+//		pointer, which refers to the entire set of line configuration parts).
+//
+//	Attributes
+//		Managed Entity Id
+//			Managed entity ID: This attribute uniquely identifies each instance of this ME. All xDSL and
+//			VDSL2 line configuration profiles and extensions that pertain to a given PPTP xDSL UNI must
+//			share a common ME ID. (R, setbycreate) (mandatory) (2 bytes)
+//
+//		Ripolicyds
+//			RIPOLICYds: This attribute indicates which policy shall be applied to determine the triggers for
+//			re-initialization in the downstream direction. A valid range of values is given in clause
+//			7.3.1.1.12.1 of [ITU-T G.997.1]. (R, W) (optional) (1 byte)
+//
+//		Ripolicyus
+//			RIPOLICYus: This attribute indicates which policy shall be applied to determine the triggers for
+//			re-initialization in the upstream direction. A valid range of values is given in clause
+//			7.3.1.1.12.2 of [ITU-T G.997.1]. (R, W) (optional) (1 byte)
+//
+//		Reinit_Time_Thresholdds
+//			REINIT_TIME_THRESHOLDds: This attribute indicates defines the downstream threshold for re-
+//			initialization based on SES, to be used by the VTU receiver when re-initialization policy 1 is
+//			used in downstream. A valid range of values is given in clause 7.3.1.1.13.1 of [ITU-T G.997.1].
+//			(R, W) (optional) (1 byte)
+//
+//		Reinit_Time_Thresholdus
+//			REINIT_TIME_THRESHOLDus: This attribute indicates defines the upstream threshold for re-
+//			initialization based on SES, to be used by the VTU receiver when reinitialization policy 1 is
+//			used in upstream. A valid range of values is given in clause 7.3.1.1.13.2 of [ITU-T G.997.1].
+//			(R, W) (optional) (1 byte)
+//
+//		Rxrefvnsfus
+//			RXREFVNSFus: If SNRM_MODE = 4, this attribute defines the upstream receiver-referred virtual
+//			noise scaling factor. The attribute value ranges from 0 (–64.0 dBm) to 255 (+63.5 dBm) – see
+//			clause 7.3.1.7.5 of [ITU-T G.997.1]. (R, W) (optional) (1 byte)
+//
+//		Txrefvnsfds
+//			TXREFVNSFds: If SNRM_MODE = 4, this attribute defines the downstream transmitter referred
+//			virtual noise scaling factor. The attribute value ranges from 0 (–64.0 dBm) to 255 (+63.5 dBm)
+//			– see clause 7.3.1.7.6 of [ITU-T G.997.1]. (R, W) (optional) (1 byte)
+//
+//		Rtx_Modeds
+//			RTX_MODEds: This attribute controls the mode of operation of [ITU-T G.998.4] retransmission in
+//			the downstream direction. A valid range of values is given in clause 7.3.1.11 of [ITU-T
+//			G.997.1]. (R, W) (mandatory) (1 byte)
+//
+//		Rtx_Modeus
+//			RTX_MODEus: This attribute controls the mode of operation of [ITU-T G.998.4] retransmission in
+//			the upstream direction. A valid range of values is given in clause 7.3.1.11 of [ITU-T G.997.1].
+//			(R, W) (mandatory) (1 byte)
+//
+//		Leftr_Thresh
+//			LEFTR_THRESH: If retransmission is used in a given transmit direction, LEFTR_THRESH specifies
+//			the threshold for declaring a near-end ''leftr'' defect. LEFTR_THRESH is equal to the integer
+//			value of this attribute multiplied by 0.01. Valid values and usage are given in clause 7.3.1.12
+//			of [ITU-T G.997.1]. (R, W) (mandatory) (1 byte)
+//
+//		Maxdelayoctet_Split Parameter Mdosplit
+//			MAXDELAYOCTET-split parameter (MDOSPLIT): This attribute defines the percentage of the
+//			MAXDELAYOCTET_ext if operating in [ITU-T G.998.4] or MAXDELAYOCTET in other cases allocated to
+//			the downstream direction. MDOSPLIT is equal to the integer value of this attribute multiplied by
+//			1%. Valid values and usage are given in clause 7.3.1.14 of [ITUT G.997.1]. (R, W) (optional)
+//			(1 byte)
+//
+//		Attndr Method Attndr_Method
+//			ATTNDR Method (ATTNDR_METHOD): This attribute specifies the method to be used for the
+//			calculation of the ATTNDR in the downstream and upstream direction. Valid values are given in
+//			clause 7.3.1.15.1 of [ITU-T G.997.1]. (R, W) (optional) (1 byte)
+//
+//		Attndr Maxdelayoctet_Split Parameter Attndr_Mdosplit
+//			ATTNDR MAXDELAYOCTET-split parameter (ATTNDR_MDOSPLIT): This attribute defines the percentage of
+//			the MAXDELAYOCTET_ext if operating in [ITU-T G.998.4] or MAXDELAYOCTET in other cases allocated
+//			to the downstream direction to be used in the improved method for calculation of the ATTNDR. The
+//			valid values are identical to the values of the line configuration parameter MDOSPLIT. See
+//			clause 7.3.1.15.2 of [ITUT G.997.1]. (R, W) (optional) (1 byte)
+//
+type Vdsl2LineConfigurationExtensions3 struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	vdsl2lineconfigurationextensions3BME = &ManagedEntityDefinition{
+		Name:    "Vdsl2LineConfigurationExtensions3",
+		ClassID: 410,
+		MessageTypes: mapset.NewSetWith(
+			Create,
+			Delete,
+			Get,
+			Set,
+		),
+		AllowedAttributeMask: 0XFFF0,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, false, 0),
+			1:  ByteField("Ripolicyds", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 1),
+			2:  ByteField("Ripolicyus", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 2),
+			3:  ByteField("ReinitTimeThresholdds", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 3),
+			4:  ByteField("ReinitTimeThresholdus", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 4),
+			5:  ByteField("Rxrefvnsfus", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 5),
+			6:  ByteField("Txrefvnsfds", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 6),
+			7:  ByteField("RtxModeds", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 7),
+			8:  ByteField("RtxModeus", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 8),
+			9:  ByteField("LeftrThresh", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 9),
+			10: ByteField("MaxdelayoctetSplitParameterMdosplit", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 10),
+			11: ByteField("AttndrMethodAttndrMethod", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 11),
+			12: ByteField("AttndrMaxdelayoctetSplitParameterAttndrMdosplit", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 12),
+		},
+	}
+}
+
+// NewVdsl2LineConfigurationExtensions3 (class ID 410 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewVdsl2LineConfigurationExtensions3(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(vdsl2lineconfigurationextensions3BME, params...)
+}