Committing vendored dependencies and generated protos
Change-Id: I349c149b513d9de7d9f60bde2c954a939da2fc54
diff --git a/vendor/github.com/cboling/omci/generated/xdsllineinventoryandstatusdatapart5.go b/vendor/github.com/cboling/omci/generated/xdsllineinventoryandstatusdatapart5.go
new file mode 100644
index 0000000..0d02d68
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/xdsllineinventoryandstatusdatapart5.go
@@ -0,0 +1,182 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const XdslLineInventoryAndStatusDataPart5ClassId ClassID = ClassID(325)
+
+var xdsllineinventoryandstatusdatapart5BME *ManagedEntityDefinition
+
+// XdslLineInventoryAndStatusDataPart5 (class ID #325)
+// This ME extends the attributes defined in the xDSL line inventory and status data parts 1..4.
+// This ME reports FEXT and NEXT attributes, and pertains to Annex C of [ITUT G.992.3] (ADSL2) and
+// Annex C of [ITUT G.992.5] (ADSL2plus).
+//
+// Relationships
+// This is one of the status data MEs associated with an xDSL UNI. The ONU automatically creates or
+// deletes an instance of this ME upon creation or deletion of a PPTP xDSL UNI part 1 that supports
+// these attributes.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
+// identical ID, this ME is implicitly linked to an instance of the PPTP xDSL UNI part 1 ME. (R)
+// (mandatory) (2 bytes)
+//
+// Fext Downstream Snr Margin
+// FEXT downstream SNR margin: The FEXT SNRMds attribute is the downstream SNR margin measured
+// during FEXTR duration at the ATU-R. The attribute value ranges from 0 (–64.0 dB) to 1270
+// (+63.0 dB). The special value 0xFFFF indicates that the attribute is out of range. (R)
+// (mandatory) (2 bytes)
+//
+// Next Downstream Snr Margin
+// NEXT downstream SNR margin: The NEXT SNRMds attribute is the downstream SNR margin measured
+// during NEXTR duration at the ATU-R. The attribute value ranges from 0 (–64.0 dB) to 1270
+// (+63.0 dB). The special value 0xFFFF indicates that the attribute is out of range. (R)
+// (mandatory) (2 bytes)
+//
+// Fext Upstream Snr Margin
+// FEXT upstream SNR margin: The FEXT SNRMus attribute is the upstream SNR margin (see clause
+// 7.5.1.16 of [ITUT G.997.1]) measured during FEXTC duration at the ATU-C. The attribute value
+// ranges from 0 (–64.0 dB) to 1270 (+63.0 dB). The special value 0xFFFF indicates that the
+// attribute is out of range. (R) (mandatory) (2 bytes)
+//
+// Next Upstream Snr Margin
+// NEXT upstream SNR margin: The NEXT SNRMus attribute is the upstream SNR margin (see clause
+// 7.5.1.16 of [ITUT G.997.1]) measured during NEXTC duration at the ATU-C. The attribute value
+// ranges from 0 (–64.0 dB) to 1270 (+63.0 dB). The special value 0xFFFF indicates that the
+// attribute is out of range. (R) (mandatory) (2 bytes)
+//
+// Fext Downstream Maximum Attainable Data Rate
+// FEXT downstream maximum attainable data rate: The FEXT ATTNDRds attribute is the maximum
+// downstream net data rate calculated from FEXT downstream SNR(f) (see clause 7.5.1.28.3.1 of
+// [ITUT G.997.1]). The rate is coded in bits per second. (R) (mandatory) (4 bytes)
+//
+// Next Downstream Maximum Attainable Data Rate
+// NEXT downstream maximum attainable data rate: The NEXT ATTNDRds attribute is the maximum
+// downstream net data rate calculated from NEXT downstream SNR(f) (see clause 7.5.1.28.3.2 of
+// [ITUT G.997.1]). The rate is coded in bits per second. (R) (mandatory) (4 bytes)
+//
+// Fext Upstream Maximum Attainable Data Rate
+// FEXT upstream maximum attainable data rate: The FEXT ATTNDRus attribute is the maximum upstream
+// net data rate calculated from FEXT upstream SNR(f) (see clause 7.5.1.28.6.1 of [ITUT G.997.1]).
+// The rate is coded in bits per second. (R) (mandatory) (4 bytes)
+//
+// Next Upstream Maximum Attainable Data Rate
+// NEXT upstream maximum attainable data rate: The NEXT ATTNDRus attribute is the maximum upstream
+// net data rate calculated from NEXT upstream SNR(f) (see clause 7.5.1.28.6.2 of [ITUT G.997.1]).
+// The rate is coded in bits per second. (R) (mandatory) (4 bytes)
+//
+// Fext Downstream Actual Power Spectral Density
+// FEXT downstream actual power spectral density: The FEXT ACTPSDds attribute is the average
+// downstream transmit PSD over the used subcarriers (see clause 7.5.1.21.1 of [ITUT G.997.1])
+// calculated from the REFPSDds and RMSGIds for FEXTR duration. The attribute value ranges from 0
+// (–90.0 dBm/Hz) to 900 (0.0 dBm/Hz). The special value 0xFFFF indicates that the parameter is out
+// of range. (R) (mandatory) (2 bytes)
+//
+// Next Downstream Actual Power Spectral Density
+// NEXT downstream actual power spectral density: The NEXT ACTPSDds attribute is the average
+// downstream transmit PSD over the used subcarriers (see clause 7.5.1.21.2 of [ITUT G.997.1])
+// calculated from the REFPSDds and RMSGIds for NEXTR duration. The attribute value ranges from 0
+// (–90.0 dBm/Hz) to 900 (0.0 dBm/Hz). The special value 0xFFFF indicates that the parameter is out
+// of range. (R) (mandatory) (2 bytes)
+//
+// Fext Upstream Actual Power Spectral Density
+// FEXT upstream actual power spectral density: The FEXT ACTPSDus attribute is the average upstream
+// transmit PSD over the used subcarriers (see clause 7.5.1.22.1 of [ITUT G.997.1]) calculated from
+// the REFPSDus and RMSGIus for FEXTC duration. The attribute value ranges from 0 (–90.0 dBm/Hz) to
+// 900 (0.0 dBm/Hz). The special value 0xFFFF indicates that the parameter is out of range. (R)
+// (mandatory) (2 bytes)
+//
+// Next Upstream Actual Power Spectral Density
+// NEXT upstream actual power spectral density: The NEXT ACTPSDus attribute is the average upstream
+// transmit PSD over the used subcarriers (see clause 7.5.1.22.2 of [ITUT G.997.1]) calculated from
+// the REFPSDus and RMSGIus for NEXTC duration. The attribute value ranges from 0 (–90.0 dBm/Hz) to
+// 900 (0.0 dBm/Hz). The special value 0xFFFF indicates that the parameter is out of range. (R)
+// (mandatory) (2 bytes)
+//
+// Fext Downstream Actual Aggregate Transmit Power
+// FEXT downstream actual aggregate transmit power: The FEXT ACTATPds attribute is the total amount
+// of transmit power (see clause 7.5.1.24.1 of [ITUT G.997.1]) calculated from PSDds measured
+// during FEXTR duration at the ATU-R. The attribute value ranges from 0 (–31.0 dBm) to 620
+// (+31.0 dBm). The special value 0xFFFF indicates that the parameter is out of range. (R)
+// (mandatory) (2 bytes)
+//
+// Next Downstream Actual Aggregate Transmit Power
+// NEXT downstream actual aggregate transmit power: The NEXT ACTATPds attribute is the total amount
+// of transmit power (see clause 7.5.1.24.2 of [ITUT G.997.1]) calculated from PSDds measured
+// during NEXTR duration at the ATU-R. The attribute value ranges from 0 (–31.0 dBm) to 620
+// (+31.0 dBm). The special value 0xFFFF indicates that the parameter is out of range. (R)
+// (mandatory) (2 bytes)
+//
+// Fext Upstream Actual Aggregate Transmit Power
+// FEXT upstream actual aggregate transmit power: The FEXT ACTATPus attribute is the total transmit
+// power (see clause 7.5.1.25.1 of [ITUT G.997.1]) calculated from PSDus measured during FEXTC
+// duration at the ATU-C. The attribute value ranges from 0 (–31.0 dBm) to 620 (+31.0 dBm). The
+// special value 0xFFFF indicates that the parameter is out of range. (R) (mandatory) (2 bytes)
+//
+// Next Upstream Actual Aggregate Transmit Power
+// NEXT upstream actual aggregate transmit power: The NEXT ACTATPus attribute is the total transmit
+// power (see clause 7.5.1.25.2 of [ITUT G.997.1]) calculated from PSDus measured during NEXTC
+// duration at the ATU-C. The attribute value ranges from 0 (–31.0 dBm) to 620 (+31.0 dBm). The
+// special value 0xFFFF indicates that the parameter is out of range. (R) (mandatory) (2 bytes)
+//
+type XdslLineInventoryAndStatusDataPart5 struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ xdsllineinventoryandstatusdatapart5BME = &ManagedEntityDefinition{
+ Name: "XdslLineInventoryAndStatusDataPart5",
+ ClassID: 325,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ ),
+ AllowedAttributeMask: 0XFFFF,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read), false, false, false, false, 0),
+ 1: Uint16Field("FextDownstreamSnrMargin", 0, mapset.NewSetWith(Read), false, false, false, false, 1),
+ 2: Uint16Field("NextDownstreamSnrMargin", 0, mapset.NewSetWith(Read), false, false, false, false, 2),
+ 3: Uint16Field("FextUpstreamSnrMargin", 0, mapset.NewSetWith(Read), false, false, false, false, 3),
+ 4: Uint16Field("NextUpstreamSnrMargin", 0, mapset.NewSetWith(Read), false, false, false, false, 4),
+ 5: Uint32Field("FextDownstreamMaximumAttainableDataRate", 0, mapset.NewSetWith(Read), false, false, false, false, 5),
+ 6: Uint32Field("NextDownstreamMaximumAttainableDataRate", 0, mapset.NewSetWith(Read), false, false, false, false, 6),
+ 7: Uint32Field("FextUpstreamMaximumAttainableDataRate", 0, mapset.NewSetWith(Read), false, false, false, false, 7),
+ 8: Uint32Field("NextUpstreamMaximumAttainableDataRate", 0, mapset.NewSetWith(Read), false, false, false, false, 8),
+ 9: Uint16Field("FextDownstreamActualPowerSpectralDensity", 0, mapset.NewSetWith(Read), false, false, false, false, 9),
+ 10: Uint16Field("NextDownstreamActualPowerSpectralDensity", 0, mapset.NewSetWith(Read), false, false, false, false, 10),
+ 11: Uint16Field("FextUpstreamActualPowerSpectralDensity", 0, mapset.NewSetWith(Read), false, false, false, false, 11),
+ 12: Uint16Field("NextUpstreamActualPowerSpectralDensity", 0, mapset.NewSetWith(Read), false, false, false, false, 12),
+ 13: Uint16Field("FextDownstreamActualAggregateTransmitPower", 0, mapset.NewSetWith(Read), false, false, false, false, 13),
+ 14: Uint16Field("NextDownstreamActualAggregateTransmitPower", 0, mapset.NewSetWith(Read), false, false, false, false, 14),
+ 15: Uint16Field("FextUpstreamActualAggregateTransmitPower", 0, mapset.NewSetWith(Read), false, false, false, false, 15),
+ 16: Uint16Field("NextUpstreamActualAggregateTransmitPower", 0, mapset.NewSetWith(Read), false, false, false, false, 16),
+ },
+ }
+}
+
+// NewXdslLineInventoryAndStatusDataPart5 (class ID 325 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewXdslLineInventoryAndStatusDataPart5(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(xdsllineinventoryandstatusdatapart5BME, params...)
+}