Committing vendored dependencies and generated protos
Change-Id: I349c149b513d9de7d9f60bde2c954a939da2fc54
diff --git a/vendor/github.com/cboling/omci/generated/xdslxtu-cperformancemonitoringhistorydata.go b/vendor/github.com/cboling/omci/generated/xdslxtu-cperformancemonitoringhistorydata.go
new file mode 100644
index 0000000..305f465
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/xdslxtu-cperformancemonitoringhistorydata.go
@@ -0,0 +1,155 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const XdslXtuCPerformanceMonitoringHistoryDataClassId ClassID = ClassID(112)
+
+var xdslxtucperformancemonitoringhistorydataBME *ManagedEntityDefinition
+
+// XdslXtuCPerformanceMonitoringHistoryData (class ID #112)
+// This ME collects PM data on the xTUC to xTUR path as seen from the xTU-C. Instances of this ME
+// are created and deleted by the OLT.
+//
+// For a complete discussion of generic PM architecture, refer to clause I.4.
+//
+// Relationships
+// An instance of this ME is associated with an xDSL UNI.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
+// identical ID, this ME is implicitly linked to an instance of the PPTP xDSL UNI part 1. (R,
+// setbycreate) (mandatory) (2 bytes)
+//
+// Interval End Time
+// Interval end time: This attribute identifies the most recently finished 15 min interval. (R)
+// (mandatory) (1 byte)
+//
+// Threshold Data 1_2 Id
+// Threshold data 1/2 ID: This attribute points to an instance of the threshold data 1 and 2 MEs
+// that contain PM threshold values. (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Loss Of Frame Seconds
+// Loss of frame seconds: (R) (mandatory) (2 bytes)
+//
+// Loss Of Signal Seconds
+// Loss of signal seconds: (R) (mandatory) (2 bytes)
+//
+// Loss Of Link Seconds
+// Loss of link seconds: (R) (mandatory) (2 bytes)
+//
+// Loss Of Power Seconds
+// Loss of power seconds: (R) (mandatory) (2 bytes)
+//
+// Errored Seconds Es
+// Errored seconds (ES): This attribute counts 1 s intervals with one or more CRC8 anomalies summed
+// over all received bearer channels, or one or more loss of signal (LOS) defects, or one or more
+// SEF defects, or one or more LPR defects. (R) (mandatory) (2 bytes)
+//
+// Severely Errored Seconds
+// (R) (mandatory) (2 bytes)
+//
+// Line Initializations
+// Line initializations: This attribute counts the total number of full initializations attempted
+// on the line, both successful and failed. (R) (mandatory) (2 bytes)
+//
+// Failed Line Initializations
+// Failed line initializations: This attribute counts the total number of failed full
+// initializations during the accumulation period. A failed full initialization occurs when
+// showtime is not reached at the end of the full initialization procedure. (R) (mandatory)
+// (2 bytes)
+//
+// Short Initializations
+// Short initializations: This attribute counts the total number of fast retrains or short
+// initializations attempted on the line, successful and failed. Fast retrain is defined in [ITUT
+// G.992.2]. Short initialization is defined in [ITUT G.992.3] and [ITUT G.992.4]. (R) (optional)
+// (2 bytes)
+//
+// Failed Short Initializations
+// (R) (optional) (2 bytes)
+//
+// Fec Seconds
+// FEC seconds: This attribute counts seconds during which there was an FEC anomaly. (R)
+// (mandatory) (2 bytes)
+//
+// Unavailable Seconds
+// Unavailable seconds: This attribute counts 1 s intervals during which the xDSL UNI is
+// unavailable. The line becomes unavailable at the onset of 10 contiguous SES-Ls. The 10 SES-Ls
+// are included in unavailable time. Once unavailable, the line becomes available at the onset of
+// 10 contiguous seconds that are not severely errored. The 10 s with no SESLs are excluded from
+// unavailable time. Some attribute counts are inhibited during unavailability – see clause
+// 7.2.7.13 of [ITUT G.997.1]. (R) (mandatory) (2 bytes)
+//
+// Sos Success Count, Near End
+// SOS success count, near end: The SOS-SUCCESS-NE attribute is a count of the total number of
+// successful SOS procedures initiated by the near-end xTU on the line during the accumulation
+// period. Successful SOS is defined in clause 12.1.4 of [ITUT G.993.2]. (R) (optional) (2 bytes)
+//
+// Sos Success Count, Far End
+// SOS success count, far end: The SOS-SUCCESS-FE attribute is a count of the total number of
+// successful SOS procedures initiated by the far-end xTU on the line during the accumulation
+// period. Successful SOS is defined in clause 12.1.4 of [ITUT G.993.2]. (R) (optional) (2 bytes)
+//
+type XdslXtuCPerformanceMonitoringHistoryData struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ xdslxtucperformancemonitoringhistorydataBME = &ManagedEntityDefinition{
+ Name: "XdslXtuCPerformanceMonitoringHistoryData",
+ ClassID: 112,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0XFFFF,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, false, 0),
+ 1: ByteField("IntervalEndTime", 0, mapset.NewSetWith(Read), false, false, false, false, 1),
+ 2: Uint16Field("ThresholdData12Id", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 2),
+ 3: Uint16Field("LossOfFrameSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 3),
+ 4: Uint16Field("LossOfSignalSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 4),
+ 5: Uint16Field("LossOfLinkSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 5),
+ 6: Uint16Field("LossOfPowerSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 6),
+ 7: Uint16Field("ErroredSecondsEs", 0, mapset.NewSetWith(Read), false, false, false, false, 7),
+ 8: Uint16Field("SeverelyErroredSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 8),
+ 9: Uint16Field("LineInitializations", 0, mapset.NewSetWith(Read), false, false, false, false, 9),
+ 10: Uint16Field("FailedLineInitializations", 0, mapset.NewSetWith(Read), false, false, false, false, 10),
+ 11: Uint16Field("ShortInitializations", 0, mapset.NewSetWith(Read), false, false, true, false, 11),
+ 12: Uint16Field("FailedShortInitializations", 0, mapset.NewSetWith(Read), false, false, true, false, 12),
+ 13: Uint16Field("FecSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 13),
+ 14: Uint16Field("UnavailableSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 14),
+ 15: Uint16Field("SosSuccessCount,NearEnd", 0, mapset.NewSetWith(Read), false, false, true, false, 15),
+ 16: Uint16Field("SosSuccessCount,FarEnd", 0, mapset.NewSetWith(Read), false, false, true, false, 16),
+ },
+ }
+}
+
+// NewXdslXtuCPerformanceMonitoringHistoryData (class ID 112 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewXdslXtuCPerformanceMonitoringHistoryData(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(xdslxtucperformancemonitoringhistorydataBME, params...)
+}