/*
 * Copyright 2018-present Open Networking Foundation

 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at

 * http://www.apache.org/licenses/LICENSE-2.0

 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package devices

import (
	"context"
	"errors"
	"fmt"
	"net"
	"sync"
	"time"

	"github.com/google/gopacket"
	"github.com/google/gopacket/layers"
	"github.com/google/gopacket/pcap"
	"github.com/looplab/fsm"
	"github.com/opencord/bbsim/internal/bbsim/packetHandlers"
	bbsim "github.com/opencord/bbsim/internal/bbsim/types"
	"github.com/opencord/bbsim/internal/common"
	omcisim "github.com/opencord/omci-sim"
	"github.com/opencord/voltha-protos/v2/go/openolt"
	tech_profile "github.com/opencord/voltha-protos/v2/go/tech_profile"
	log "github.com/sirupsen/logrus"
	"google.golang.org/grpc"
	"google.golang.org/grpc/codes"
	"google.golang.org/grpc/reflection"
	"google.golang.org/grpc/status"
)

var oltLogger = log.WithFields(log.Fields{
	"module": "OLT",
})

type OltDevice struct {
	sync.Mutex

	// BBSIM Internals
	ID                   int
	SerialNumber         string
	NumNni               int
	NumPon               int
	NumOnuPerPon         int
	InternalState        *fsm.FSM
	channel              chan Message
	nniPktInChannel      chan *bbsim.PacketMsg // packets coming in from the NNI and going to VOLTHA
	nniHandle            *pcap.Handle          // handle on the NNI interface, close it when shutting down the NNI channel
	Flows                map[FlowKey]openolt.Flow
	Delay                int
	ControlledActivation mode
	EventChannel         chan common.Event
	PublishEvents        bool

	Pons []*PonPort
	Nnis []*NniPort

	// OLT Attributes
	OperState *fsm.FSM

	enableContext       context.Context
	enableContextCancel context.CancelFunc

	OpenoltStream *openolt.Openolt_EnableIndicationServer
	enablePerf    bool
}

var olt OltDevice
var oltServer *grpc.Server

func GetOLT() *OltDevice {
	return &olt
}

func CreateOLT(oltId int, nni int, pon int, onuPerPon int, sTag int, cTagInit int, auth bool, dhcp bool, delay int, ca string, enablePerf bool, event bool, isMock bool) *OltDevice {
	oltLogger.WithFields(log.Fields{
		"ID":           oltId,
		"NumNni":       nni,
		"NumPon":       pon,
		"NumOnuPerPon": onuPerPon,
	}).Debug("CreateOLT")

	olt = OltDevice{
		ID:           oltId,
		SerialNumber: fmt.Sprintf("BBSIM_OLT_%d", oltId),
		OperState: getOperStateFSM(func(e *fsm.Event) {
			oltLogger.Debugf("Changing OLT OperState from %s to %s", e.Src, e.Dst)
		}),
		NumNni:        nni,
		NumPon:        pon,
		NumOnuPerPon:  onuPerPon,
		Pons:          []*PonPort{},
		Nnis:          []*NniPort{},
		Delay:         delay,
		Flows:         make(map[FlowKey]openolt.Flow),
		enablePerf:    enablePerf,
		PublishEvents: event,
	}

	if val, ok := ControlledActivationModes[ca]; ok {
		olt.ControlledActivation = val
	} else {
		oltLogger.Warn("Unknown ControlledActivation Mode given, running in Default mode")
		olt.ControlledActivation = Default
	}

	// OLT State machine
	// NOTE do we need 2 state machines for the OLT? (InternalState and OperState)
	olt.InternalState = fsm.NewFSM(
		"created",
		fsm.Events{
			{Name: "initialize", Src: []string{"created", "deleted"}, Dst: "initialized"},
			{Name: "enable", Src: []string{"initialized", "disabled"}, Dst: "enabled"},
			{Name: "disable", Src: []string{"enabled"}, Dst: "disabled"},
			//delete event in enabled state below is for reboot OLT case.
			{Name: "delete", Src: []string{"disabled", "enabled"}, Dst: "deleted"},
		},
		fsm.Callbacks{
			"enter_state": func(e *fsm.Event) {
				oltLogger.Debugf("Changing OLT InternalState from %s to %s", e.Src, e.Dst)
			},
			"enter_initialized": func(e *fsm.Event) { olt.InitOlt() },
		},
	)

	if isMock != true {
		// create NNI Port
		nniPort, err := CreateNNI(&olt)
		if err != nil {
			oltLogger.Fatalf("Couldn't create NNI Port: %v", err)
		}

		olt.Nnis = append(olt.Nnis, &nniPort)
	}

	// create PON ports
	availableCTag := cTagInit
	for i := 0; i < pon; i++ {
		p := CreatePonPort(&olt, uint32(i))

		// create ONU devices
		for j := 0; j < onuPerPon; j++ {
			delay := time.Duration(olt.Delay*j) * time.Millisecond
			o := CreateONU(&olt, *p, uint32(j+1), sTag, availableCTag, auth, dhcp, delay, isMock)
			p.Onus = append(p.Onus, o)
			availableCTag = availableCTag + 1
		}

		olt.Pons = append(olt.Pons, p)
	}

	if isMock != true {
		if err := olt.InternalState.Event("initialize"); err != nil {
			log.Errorf("Error initializing OLT: %v", err)
			return nil
		}
	}

	if olt.PublishEvents {
		log.Debugf("BBSim event publishing is enabled")
		// Create a channel to write event messages
		olt.EventChannel = make(chan common.Event, 100)
	}

	return &olt
}

func (o *OltDevice) InitOlt() error {

	if oltServer == nil {
		oltServer, _ = o.newOltServer()
	} else {
		// FIXME there should never be a server running if we are initializing the OLT
		oltLogger.Fatal("OLT server already running.")
	}

	// create new channel for processOltMessages Go routine
	o.channel = make(chan Message)

	o.nniPktInChannel = make(chan *bbsim.PacketMsg, 1024)
	// FIXME we are assuming we have only one NNI
	if o.Nnis[0] != nil {
		// NOTE we want to make sure the state is down when we initialize the OLT,
		// the NNI may be in a bad state after a disable/reboot as we are not disabling it for
		// in-band management
		o.Nnis[0].OperState.SetState("down")
		ch, handle, err := o.Nnis[0].NewVethChan()
		if err == nil {
			oltLogger.WithFields(log.Fields{
				"Type":      o.Nnis[0].Type,
				"IntfId":    o.Nnis[0].ID,
				"OperState": o.Nnis[0].OperState.Current(),
			}).Info("NNI Channel created")
			o.nniPktInChannel = ch
			o.nniHandle = handle
		} else {
			oltLogger.Errorf("Error getting NNI channel: %v", err)
		}
	}

	return nil
}

func (o *OltDevice) RestartOLT() error {

	rebootDelay := common.Options.Olt.OltRebootDelay

	oltLogger.WithFields(log.Fields{
		"oltId": o.ID,
	}).Infof("Simulating OLT restart... (%ds)", rebootDelay)

	// transition internal state to deleted
	if err := o.InternalState.Event("delete"); err != nil {
		oltLogger.WithFields(log.Fields{
			"oltId": o.ID,
		}).Errorf("Error deleting OLT: %v", err)
		return err
	}

	// TODO handle hard poweroff (i.e. no indications sent to Voltha) vs soft poweroff
	time.Sleep(1 * time.Second) // we need to give the OLT the time to respond to all the pending gRPC request before stopping the server
	if err := o.StopOltServer(); err != nil {
		oltLogger.Errorf("Error in stopping OLT server")
		return err
	}

	for _, pon := range olt.Pons {
		msg := Message{
			Type: PonIndication,
			Data: PonIndicationMessage{
				OperState: DOWN,
				PonPortID: pon.ID,
			},
		}
		o.channel <- msg

		for _, onu := range pon.Onus {
			if onu.InternalState.Current() != "initialized" {
				onu.InternalState.Event("disable")
			}
		}
	}

	// terminate the OLT's processOltMessages go routine
	close(o.channel)
	// terminate the OLT's processNniPacketIns go routine
	go o.nniHandle.Close()
	close(o.nniPktInChannel)

	time.Sleep(time.Duration(rebootDelay) * time.Second)

	if err := o.InternalState.Event("initialize"); err != nil {
		oltLogger.WithFields(log.Fields{
			"oltId": o.ID,
		}).Errorf("Error initializing OLT: %v", err)
		return err
	}
	oltLogger.WithFields(log.Fields{
		"oltId": o.ID,
	}).Info("OLT restart completed")
	return nil
}

// newOltServer launches a new grpc server for OpenOLT
func (o *OltDevice) newOltServer() (*grpc.Server, error) {
	address := common.Options.BBSim.OpenOltAddress
	lis, err := net.Listen("tcp", address)
	if err != nil {
		oltLogger.Fatalf("OLT failed to listen: %v", err)
	}
	grpcServer := grpc.NewServer()

	openolt.RegisterOpenoltServer(grpcServer, o)

	reflection.Register(grpcServer)

	go grpcServer.Serve(lis)
	oltLogger.Debugf("OLT listening on %v", address)

	return grpcServer, nil
}

// StopOltServer stops the OpenOLT grpc server
func (o *OltDevice) StopOltServer() error {
	// TODO handle poweroff vs graceful shutdown
	if oltServer != nil {
		oltLogger.WithFields(log.Fields{
			"oltId": o.SerialNumber,
		}).Warnf("Stopping OLT gRPC server")
		oltServer.Stop()
		oltServer = nil
	}

	return nil
}

// Device Methods

// Enable implements the OpenOLT EnableIndicationServer functionality
func (o *OltDevice) Enable(stream openolt.Openolt_EnableIndicationServer) error {
	oltLogger.Debug("Enable OLT called")
	rebootFlag := false

	// If enabled has already been called then an enabled context has
	// been created. If this is the case then we want to cancel all the
	// proessing loops associated with that enable before we recreate
	// new ones
	o.Lock()
	if o.enableContext != nil && o.enableContextCancel != nil {
		o.enableContextCancel()
		rebootFlag = true
	}
	o.enableContext, o.enableContextCancel = context.WithCancel(context.TODO())
	o.Unlock()

	wg := sync.WaitGroup{}
	wg.Add(3)

	o.OpenoltStream = &stream

	// create Go routine to process all OLT events
	go o.processOltMessages(o.enableContext, stream, &wg)
	go o.processNniPacketIns(o.enableContext, stream, &wg)

	// enable the OLT
	oltMsg := Message{
		Type: OltIndication,
		Data: OltIndicationMessage{
			OperState: UP,
		},
	}
	o.channel <- oltMsg

	// send NNI Port Indications
	for _, nni := range o.Nnis {
		msg := Message{
			Type: NniIndication,
			Data: NniIndicationMessage{
				OperState: UP,
				NniPortID: nni.ID,
			},
		}
		o.channel <- msg
	}

	go o.processOmciMessages(o.enableContext, stream, &wg)

	if rebootFlag == true {
		for _, pon := range o.Pons {
			if pon.InternalState.Current() == "disabled" {
				msg := Message{
					Type: PonIndication,
					Data: PonIndicationMessage{
						OperState: UP,
						PonPortID: pon.ID,
					},
				}
				o.channel <- msg
			}
		}
	} else {

		// 1. controlledActivation == Default: Send both PON and ONUs indications
		// 2. controlledActivation == only-onu: that means only ONUs will be controlled activated, so auto send PON indications

		if o.ControlledActivation == Default || o.ControlledActivation == OnlyONU {
			// send PON Port indications
			for _, pon := range o.Pons {
				msg := Message{
					Type: PonIndication,
					Data: PonIndicationMessage{
						OperState: UP,
						PonPortID: pon.ID,
					},
				}
				o.channel <- msg
			}
		}
	}

	oltLogger.Debug("Enable OLT Done")
	wg.Wait()
	return nil
}

func (o *OltDevice) processOmciMessages(ctx context.Context, stream openolt.Openolt_EnableIndicationServer, wg *sync.WaitGroup) {
	ch := omcisim.GetChannel()

	oltLogger.Debug("Starting OMCI Indication Channel")

loop:
	for {
		select {
		case <-ctx.Done():
			oltLogger.Debug("OMCI processing canceled via context")
			break loop
		case message, ok := <-ch:
			if !ok || ctx.Err() != nil {
				oltLogger.Debug("OMCI processing canceled via channel close")
				break loop
			}

			oltLogger.WithFields(log.Fields{
				"messageType": message.Type,
				"OnuId":       message.Data.OnuId,
				"IntfId":      message.Data.IntfId,
			}).Info("Received message on OMCI Sim channel")

			onuId := message.Data.OnuId
			intfId := message.Data.IntfId
			onu, err := o.FindOnuById(intfId, onuId)
			if err != nil {
				oltLogger.Errorf("Failed to find onu: %v", err)
				continue
			}
			go onu.processOmciMessage(message, stream)
		}
	}

	wg.Done()
}

// Helpers method

func (o OltDevice) GetPonById(id uint32) (*PonPort, error) {
	for _, pon := range o.Pons {
		if pon.ID == id {
			return pon, nil
		}
	}
	return nil, errors.New(fmt.Sprintf("Cannot find PonPort with id %d in OLT %d", id, o.ID))
}

func (o OltDevice) getNniById(id uint32) (*NniPort, error) {
	for _, nni := range o.Nnis {
		if nni.ID == id {
			return nni, nil
		}
	}
	return nil, errors.New(fmt.Sprintf("Cannot find NniPort with id %d in OLT %d", id, o.ID))
}

func (o *OltDevice) sendAlarmIndication(alarmInd *openolt.AlarmIndication, stream openolt.Openolt_EnableIndicationServer) {
	data := &openolt.Indication_AlarmInd{AlarmInd: alarmInd}
	if err := stream.Send(&openolt.Indication{Data: data}); err != nil {
		oltLogger.Errorf("Failed to send Alarm Indication: %v", err)
		return
	}

	oltLogger.WithFields(log.Fields{
		"AlarmIndication": alarmInd,
	}).Debug("Sent Indication_AlarmInd")
}

func (o *OltDevice) sendOltIndication(msg OltIndicationMessage, stream openolt.Openolt_EnableIndicationServer) {
	data := &openolt.Indication_OltInd{OltInd: &openolt.OltIndication{OperState: msg.OperState.String()}}
	if err := stream.Send(&openolt.Indication{Data: data}); err != nil {
		oltLogger.Errorf("Failed to send Indication_OltInd: %v", err)
		return
	}

	oltLogger.WithFields(log.Fields{
		"OperState": msg.OperState,
	}).Debug("Sent Indication_OltInd")
}

func (o *OltDevice) sendNniIndication(msg NniIndicationMessage, stream openolt.Openolt_EnableIndicationServer) {
	nni, _ := o.getNniById(msg.NniPortID)
	if msg.OperState == UP {
		if err := nni.OperState.Event("enable"); err != nil {
			log.WithFields(log.Fields{
				"Type":      nni.Type,
				"IntfId":    nni.ID,
				"OperState": nni.OperState.Current(),
			}).Errorf("Can't move NNI Port to enabled state: %v", err)
		}
	} else if msg.OperState == DOWN {
		if err := nni.OperState.Event("disable"); err != nil {
			log.WithFields(log.Fields{
				"Type":      nni.Type,
				"IntfId":    nni.ID,
				"OperState": nni.OperState.Current(),
			}).Errorf("Can't move NNI Port to disable state: %v", err)
		}
	}
	// NOTE Operstate may need to be an integer
	operData := &openolt.Indication_IntfOperInd{IntfOperInd: &openolt.IntfOperIndication{
		Type:      nni.Type,
		IntfId:    nni.ID,
		OperState: nni.OperState.Current(),
	}}

	if err := stream.Send(&openolt.Indication{Data: operData}); err != nil {
		oltLogger.Errorf("Failed to send Indication_IntfOperInd for NNI: %v", err)
		return
	}

	oltLogger.WithFields(log.Fields{
		"Type":      nni.Type,
		"IntfId":    nni.ID,
		"OperState": nni.OperState.Current(),
	}).Debug("Sent Indication_IntfOperInd for NNI")
}

func (o *OltDevice) sendPonIndication(ponPortID uint32) {

	stream := *o.OpenoltStream
	pon, _ := o.GetPonById(ponPortID)
	// Send IntfIndication for PON port
	discoverData := &openolt.Indication_IntfInd{IntfInd: &openolt.IntfIndication{
		IntfId:    pon.ID,
		OperState: pon.OperState.Current(),
	}}

	if err := stream.Send(&openolt.Indication{Data: discoverData}); err != nil {
		oltLogger.Errorf("Failed to send Indication_IntfInd: %v", err)
		return
	}

	oltLogger.WithFields(log.Fields{
		"IntfId":    pon.ID,
		"OperState": pon.OperState.Current(),
	}).Debug("Sent Indication_IntfInd")

	// Send IntfOperIndication for PON port
	operData := &openolt.Indication_IntfOperInd{IntfOperInd: &openolt.IntfOperIndication{
		Type:      pon.Type,
		IntfId:    pon.ID,
		OperState: pon.OperState.Current(),
	}}

	if err := stream.Send(&openolt.Indication{Data: operData}); err != nil {
		oltLogger.Errorf("Failed to send Indication_IntfOperInd for PON: %v", err)
		return
	}

	oltLogger.WithFields(log.Fields{
		"Type":      pon.Type,
		"IntfId":    pon.ID,
		"OperState": pon.OperState.Current(),
	}).Debug("Sent Indication_IntfOperInd for PON")
}

// processOltMessages handles messages received over the OpenOLT interface
func (o *OltDevice) processOltMessages(ctx context.Context, stream openolt.Openolt_EnableIndicationServer, wg *sync.WaitGroup) {
	oltLogger.Debug("Starting OLT Indication Channel")
	ch := o.channel

loop:
	for {
		select {
		case <-ctx.Done():
			oltLogger.Debug("OLT Indication processing canceled via context")
			break loop
		case message, ok := <-ch:
			if !ok || ctx.Err() != nil {
				oltLogger.Debug("OLT Indication processing canceled via closed channel")
				break loop
			}

			oltLogger.WithFields(log.Fields{
				"oltId":       o.ID,
				"messageType": message.Type,
			}).Trace("Received message")

			switch message.Type {
			case OltIndication:
				msg, _ := message.Data.(OltIndicationMessage)
				if msg.OperState == UP {
					o.InternalState.Event("enable")
					o.OperState.Event("enable")
				} else if msg.OperState == DOWN {
					o.InternalState.Event("disable")
					o.OperState.Event("disable")
				}
				o.sendOltIndication(msg, stream)
			case AlarmIndication:
				alarmInd, _ := message.Data.(*openolt.AlarmIndication)
				o.sendAlarmIndication(alarmInd, stream)
			case NniIndication:
				msg, _ := message.Data.(NniIndicationMessage)
				o.sendNniIndication(msg, stream)
			case PonIndication:
				msg, _ := message.Data.(PonIndicationMessage)
				pon, _ := o.GetPonById(msg.PonPortID)
				if msg.OperState == UP {
					pon.OperState.Event("enable")
					pon.InternalState.Event("enable")
				} else if msg.OperState == DOWN {
					pon.OperState.Event("disable")
					pon.InternalState.Event("disable")
				}
			default:
				oltLogger.Warnf("Received unknown message data %v for type %v in OLT Channel", message.Data, message.Type)
			}
		}
	}
	wg.Done()
	oltLogger.Warn("Stopped handling OLT Indication Channel")
}

// processNniPacketIns handles messages received over the NNI interface
func (o *OltDevice) processNniPacketIns(ctx context.Context, stream openolt.Openolt_EnableIndicationServer, wg *sync.WaitGroup) {
	oltLogger.WithFields(log.Fields{
		"nniChannel": o.nniPktInChannel,
	}).Debug("Started Processing Packets arriving from the NNI")
	nniId := o.Nnis[0].ID // FIXME we are assuming we have only one NNI

	ch := o.nniPktInChannel

loop:
	for {
		select {
		case <-ctx.Done():
			oltLogger.Debug("NNI Indication processing canceled via context")
			break loop
		case message, ok := <-ch:
			if !ok || ctx.Err() != nil {
				oltLogger.Debug("NNI Indication processing canceled via channel closed")
				break loop
			}
			oltLogger.Tracef("Received packets on NNI Channel")

			onuMac, err := packetHandlers.GetDstMacAddressFromPacket(message.Pkt)

			if err != nil {
				log.WithFields(log.Fields{
					"IntfType": "nni",
					"IntfId":   nniId,
					"Pkt":      message.Pkt.Data(),
				}).Error("Can't find Dst MacAddress in packet")
				return
			}

			onu, err := o.FindOnuByMacAddress(onuMac)
			if err != nil {
				log.WithFields(log.Fields{
					"IntfType":   "nni",
					"IntfId":     nniId,
					"Pkt":        message.Pkt.Data(),
					"MacAddress": onuMac.String(),
				}).Error("Can't find ONU with MacAddress")
				return
			}

			doubleTaggedPkt, err := packetHandlers.PushDoubleTag(onu.STag, onu.CTag, message.Pkt)
			if err != nil {
				log.Error("Fail to add double tag to packet")
			}

			data := &openolt.Indication_PktInd{PktInd: &openolt.PacketIndication{
				IntfType: "nni",
				IntfId:   nniId,
				Pkt:      doubleTaggedPkt.Data()}}
			if err := stream.Send(&openolt.Indication{Data: data}); err != nil {
				oltLogger.WithFields(log.Fields{
					"IntfType": data.PktInd.IntfType,
					"IntfId":   nniId,
					"Pkt":      doubleTaggedPkt.Data(),
				}).Errorf("Fail to send PktInd indication: %v", err)
			}
			oltLogger.WithFields(log.Fields{
				"IntfType": data.PktInd.IntfType,
				"IntfId":   nniId,
				"Pkt":      doubleTaggedPkt.Data(),
				"OnuSn":    onu.Sn(),
			}).Tracef("Sent PktInd indication")
		}
	}
	wg.Done()
	oltLogger.WithFields(log.Fields{
		"nniChannel": o.nniPktInChannel,
	}).Warn("Stopped handling NNI Channel")
}

// returns an ONU with a given Serial Number
func (o OltDevice) FindOnuBySn(serialNumber string) (*Onu, error) {
	// TODO this function can be a performance bottleneck when we have many ONUs,
	// memoizing it will remove the bottleneck
	for _, pon := range o.Pons {
		for _, onu := range pon.Onus {
			if onu.Sn() == serialNumber {
				return onu, nil
			}
		}
	}

	return &Onu{}, errors.New(fmt.Sprintf("cannot-find-onu-by-serial-number-%s", serialNumber))
}

// returns an ONU with a given interface/Onu Id
func (o OltDevice) FindOnuById(intfId uint32, onuId uint32) (*Onu, error) {
	// TODO this function can be a performance bottleneck when we have many ONUs,
	// memoizing it will remove the bottleneck
	for _, pon := range o.Pons {
		if pon.ID == intfId {
			for _, onu := range pon.Onus {
				if onu.ID == onuId {
					return onu, nil
				}
			}
		}
	}
	return &Onu{}, errors.New(fmt.Sprintf("cannot-find-onu-by-id-%v-%v", intfId, onuId))
}

// returns an ONU with a given Mac Address
func (o OltDevice) FindOnuByMacAddress(mac net.HardwareAddr) (*Onu, error) {
	// TODO this function can be a performance bottleneck when we have many ONUs,
	// memoizing it will remove the bottleneck
	for _, pon := range o.Pons {
		for _, onu := range pon.Onus {
			if onu.HwAddress.String() == mac.String() {
				return onu, nil
			}
		}
	}

	return &Onu{}, errors.New(fmt.Sprintf("cannot-find-onu-by-mac-address-%s", mac))
}

// GRPC Endpoints

func (o OltDevice) ActivateOnu(context context.Context, onu *openolt.Onu) (*openolt.Empty, error) {
	oltLogger.WithFields(log.Fields{
		"OnuSn": onuSnToString(onu.SerialNumber),
	}).Info("Received ActivateOnu call from VOLTHA")
	publishEvent("ONU-activate-indication-received", int32(onu.IntfId), int32(onu.OnuId), onuSnToString(onu.SerialNumber))

	pon, _ := o.GetPonById(onu.IntfId)
	_onu, _ := pon.GetOnuBySn(onu.SerialNumber)
	_onu.SetID(onu.OnuId)

	if err := _onu.OperState.Event("enable"); err != nil {
		oltLogger.WithFields(log.Fields{
			"IntfId": _onu.PonPortID,
			"OnuSn":  _onu.Sn(),
			"OnuId":  _onu.ID,
		}).Infof("Failed to transition ONU.OperState to enabled state: %s", err.Error())
	}
	if err := _onu.InternalState.Event("enable"); err != nil {
		oltLogger.WithFields(log.Fields{
			"IntfId": _onu.PonPortID,
			"OnuSn":  _onu.Sn(),
			"OnuId":  _onu.ID,
		}).Infof("Failed to transition ONU to enabled state: %s", err.Error())
	}

	// NOTE we need to immediately activate the ONU or the OMCI state machine won't start

	return new(openolt.Empty), nil
}

func (o OltDevice) DeactivateOnu(context.Context, *openolt.Onu) (*openolt.Empty, error) {
	oltLogger.Error("DeactivateOnu not implemented")
	return new(openolt.Empty), nil
}

func (o OltDevice) DeleteOnu(_ context.Context, onu *openolt.Onu) (*openolt.Empty, error) {
	oltLogger.WithFields(log.Fields{
		"IntfId": onu.IntfId,
		"OnuId":  onu.OnuId,
	}).Info("Received DeleteOnu call from VOLTHA")

	pon, err := o.GetPonById(onu.IntfId)
	if err != nil {
		oltLogger.WithFields(log.Fields{
			"OnuId":  onu.OnuId,
			"IntfId": onu.IntfId,
			"err":    err,
		}).Error("Can't find PonPort")
	}
	_onu, err := pon.GetOnuById(onu.OnuId)
	if err != nil {
		oltLogger.WithFields(log.Fields{
			"OnuId":  onu.OnuId,
			"IntfId": onu.IntfId,
			"err":    err,
		}).Error("Can't find Onu")
	}

	if err := _onu.InternalState.Event("initialize"); err != nil {
		oltLogger.WithFields(log.Fields{
			"IntfId": _onu.PonPortID,
			"OnuSn":  _onu.Sn(),
			"OnuId":  _onu.ID,
		}).Infof("Failed to transition ONU to initialized state: %s", err.Error())
	}

	return new(openolt.Empty), nil
}

func (o OltDevice) DisableOlt(context.Context, *openolt.Empty) (*openolt.Empty, error) {
	// NOTE when we disable the OLT should we disable NNI, PONs and ONUs altogether?
	oltLogger.WithFields(log.Fields{
		"oltId": o.ID,
	}).Info("Disabling OLT")
	publishEvent("OLT-disable-received", -1, -1, "")

	for _, pon := range o.Pons {
		if pon.InternalState.Current() == "enabled" {
			// disable PONs
			msg := Message{
				Type: PonIndication,
				Data: PonIndicationMessage{
					OperState: DOWN,
					PonPortID: pon.ID,
				},
			}
			o.channel <- msg
		}
	}

	// Note that we are not disabling the NNI as the real OLT does not.
	// The reason for that is in-band management

	// disable OLT
	oltMsg := Message{
		Type: OltIndication,
		Data: OltIndicationMessage{
			OperState: DOWN,
		},
	}
	o.channel <- oltMsg
	return new(openolt.Empty), nil
}

func (o OltDevice) DisablePonIf(context.Context, *openolt.Interface) (*openolt.Empty, error) {
	oltLogger.Error("DisablePonIf not implemented")
	return new(openolt.Empty), nil
}

func (o *OltDevice) EnableIndication(_ *openolt.Empty, stream openolt.Openolt_EnableIndicationServer) error {
	oltLogger.WithField("oltId", o.ID).Info("OLT receives EnableIndication call from VOLTHA")
	publishEvent("OLT-enable-received", -1, -1, "")
	o.Enable(stream)
	return nil
}

func (o OltDevice) EnablePonIf(_ context.Context, intf *openolt.Interface) (*openolt.Empty, error) {
	oltLogger.Errorf("EnablePonIf request received for PON %d", intf.IntfId)
	ponID := intf.GetIntfId()
	msg := Message{
		Type: PonIndication,
		Data: PonIndicationMessage{
			OperState: UP,
			PonPortID: ponID,
		},
	}
	o.channel <- msg

	return new(openolt.Empty), nil
}

func (o OltDevice) FlowAdd(ctx context.Context, flow *openolt.Flow) (*openolt.Empty, error) {
	oltLogger.WithFields(log.Fields{
		"IntfId":    flow.AccessIntfId,
		"OnuId":     flow.OnuId,
		"EthType":   fmt.Sprintf("%x", flow.Classifier.EthType),
		"InnerVlan": flow.Classifier.IVid,
		"OuterVlan": flow.Classifier.OVid,
		"FlowType":  flow.FlowType,
		"FlowId":    flow.FlowId,
		"UniID":     flow.UniId,
		"PortNo":    flow.PortNo,
	}).Tracef("OLT receives FlowAdd")

	flowKey := FlowKey{}
	if !o.enablePerf {
		flowKey = FlowKey{ID: flow.FlowId, Direction: flow.FlowType}
		olt.Flows[flowKey] = *flow
	}

	if flow.AccessIntfId == -1 {
		oltLogger.WithFields(log.Fields{
			"FlowId": flow.FlowId,
		}).Debugf("This is an OLT flow")
	} else {
		pon, err := o.GetPonById(uint32(flow.AccessIntfId))
		if err != nil {
			oltLogger.WithFields(log.Fields{
				"OnuId":  flow.OnuId,
				"IntfId": flow.AccessIntfId,
				"err":    err,
			}).Error("Can't find PonPort")
		}
		onu, err := pon.GetOnuById(uint32(flow.OnuId))
		if err != nil {
			oltLogger.WithFields(log.Fields{
				"OnuId":  flow.OnuId,
				"IntfId": flow.AccessIntfId,
				"err":    err,
			}).Error("Can't find Onu")
		}
		if !o.enablePerf {
			onu.Flows = append(onu.Flows, flowKey)
		}

		msg := Message{
			Type: FlowUpdate,
			Data: OnuFlowUpdateMessage{
				PonPortID: pon.ID,
				OnuID:     onu.ID,
				Flow:      flow,
			},
		}
		onu.Channel <- msg
	}

	return new(openolt.Empty), nil
}

// FlowRemove request from VOLTHA
func (o OltDevice) FlowRemove(_ context.Context, flow *openolt.Flow) (*openolt.Empty, error) {
	oltLogger.WithFields(log.Fields{
		"FlowId":   flow.FlowId,
		"FlowType": flow.FlowType,
	}).Tracef("OLT receives FlowRemove")

	if !o.enablePerf { // remove only if flow were stored
		flowKey := FlowKey{
			ID:        flow.FlowId,
			Direction: flow.FlowType,
		}

		// Check if flow exists
		storedFlow, ok := o.Flows[flowKey]
		if !ok {
			oltLogger.Errorf("Flow %v not found", flow)
			return new(openolt.Empty), status.Errorf(codes.NotFound, "Flow not found")
		}

		// if its ONU flow remove it from ONU also
		if storedFlow.AccessIntfId != -1 {
			pon := o.Pons[uint32(storedFlow.AccessIntfId)]
			onu, err := pon.GetOnuById(uint32(storedFlow.OnuId))
			if err != nil {
				oltLogger.WithFields(log.Fields{
					"OnuId":  storedFlow.OnuId,
					"IntfId": storedFlow.AccessIntfId,
					"err":    err,
				}).Error("ONU not found")
				return new(openolt.Empty), nil
			}
			onu.DeleteFlow(flowKey)
		}

		// delete from olt flows
		delete(o.Flows, flowKey)
	}
	return new(openolt.Empty), nil
}

func (o OltDevice) HeartbeatCheck(context.Context, *openolt.Empty) (*openolt.Heartbeat, error) {
	res := openolt.Heartbeat{HeartbeatSignature: uint32(time.Now().Unix())}
	oltLogger.WithFields(log.Fields{
		"signature": res.HeartbeatSignature,
	}).Trace("HeartbeatCheck")
	return &res, nil
}

func (o OltDevice) GetDeviceInfo(context.Context, *openolt.Empty) (*openolt.DeviceInfo, error) {

	oltLogger.WithFields(log.Fields{
		"oltId":    o.ID,
		"PonPorts": o.NumPon,
	}).Info("OLT receives GetDeviceInfo call from VOLTHA")
	devinfo := new(openolt.DeviceInfo)
	devinfo.Vendor = common.Options.Olt.Vendor
	devinfo.Model = common.Options.Olt.Model
	devinfo.HardwareVersion = common.Options.Olt.HardwareVersion
	devinfo.FirmwareVersion = common.Options.Olt.FirmwareVersion
	devinfo.Technology = common.Options.Olt.Technology
	devinfo.PonPorts = uint32(o.NumPon)
	devinfo.OnuIdStart = 1
	devinfo.OnuIdEnd = 255
	devinfo.AllocIdStart = 1024
	devinfo.AllocIdEnd = 16383
	devinfo.GemportIdStart = 1024
	devinfo.GemportIdEnd = 65535
	devinfo.FlowIdStart = 1
	devinfo.FlowIdEnd = 16383
	devinfo.DeviceSerialNumber = o.SerialNumber
	devinfo.DeviceId = common.Options.Olt.DeviceId

	return devinfo, nil
}

func (o OltDevice) OmciMsgOut(ctx context.Context, omci_msg *openolt.OmciMsg) (*openolt.Empty, error) {
	pon, _ := o.GetPonById(omci_msg.IntfId)
	onu, _ := pon.GetOnuById(omci_msg.OnuId)
	oltLogger.WithFields(log.Fields{
		"IntfId": onu.PonPortID,
		"OnuId":  onu.ID,
		"OnuSn":  onu.Sn(),
	}).Tracef("Received OmciMsgOut")
	msg := Message{
		Type: OMCI,
		Data: OmciMessage{
			OnuSN:   onu.SerialNumber,
			OnuID:   onu.ID,
			omciMsg: omci_msg,
		},
	}
	onu.Channel <- msg
	return new(openolt.Empty), nil
}

func (o OltDevice) OnuPacketOut(ctx context.Context, onuPkt *openolt.OnuPacket) (*openolt.Empty, error) {
	pon, err := o.GetPonById(onuPkt.IntfId)
	if err != nil {
		oltLogger.WithFields(log.Fields{
			"OnuId":  onuPkt.OnuId,
			"IntfId": onuPkt.IntfId,
			"err":    err,
		}).Error("Can't find PonPort")
	}
	onu, err := pon.GetOnuById(onuPkt.OnuId)
	if err != nil {
		oltLogger.WithFields(log.Fields{
			"OnuId":  onuPkt.OnuId,
			"IntfId": onuPkt.IntfId,
			"err":    err,
		}).Error("Can't find Onu")
	}

	oltLogger.WithFields(log.Fields{
		"IntfId": onu.PonPortID,
		"OnuId":  onu.ID,
		"OnuSn":  onu.Sn(),
	}).Tracef("Received OnuPacketOut")

	rawpkt := gopacket.NewPacket(onuPkt.Pkt, layers.LayerTypeEthernet, gopacket.Default)
	pktType, err := packetHandlers.IsEapolOrDhcp(rawpkt)

	msg := Message{
		Type: OnuPacketOut,
		Data: OnuPacketMessage{
			IntfId: onuPkt.IntfId,
			OnuId:  onuPkt.OnuId,
			Packet: rawpkt,
			Type:   pktType,
		},
	}
	onu.Channel <- msg

	return new(openolt.Empty), nil
}

func (o OltDevice) Reboot(context.Context, *openolt.Empty) (*openolt.Empty, error) {
	oltLogger.WithFields(log.Fields{
		"oltId": o.ID,
	}).Info("Shutting down")
	publishEvent("OLT-reboot-received", -1, -1, "")
	go o.RestartOLT()
	return new(openolt.Empty), nil
}

func (o OltDevice) ReenableOlt(context.Context, *openolt.Empty) (*openolt.Empty, error) {
	oltLogger.WithFields(log.Fields{
		"oltId": o.ID,
	}).Info("Received ReenableOlt request from VOLTHA")
	publishEvent("OLT-reenable-received", -1, -1, "")

	// enable OLT
	oltMsg := Message{
		Type: OltIndication,
		Data: OltIndicationMessage{
			OperState: UP,
		},
	}
	o.channel <- oltMsg

	for _, pon := range o.Pons {
		if pon.InternalState.Current() == "disabled" {
			msg := Message{
				Type: PonIndication,
				Data: PonIndicationMessage{
					OperState: UP,
					PonPortID: pon.ID,
				},
			}
			o.channel <- msg
		}
	}

	return new(openolt.Empty), nil
}

func (o OltDevice) UplinkPacketOut(context context.Context, packet *openolt.UplinkPacket) (*openolt.Empty, error) {
	pkt := gopacket.NewPacket(packet.Pkt, layers.LayerTypeEthernet, gopacket.Default)

	o.Nnis[0].sendNniPacket(pkt) // FIXME we are assuming we have only one NNI
	// NOTE should we return an error if sendNniPakcet fails?
	return new(openolt.Empty), nil
}

func (o OltDevice) CollectStatistics(context.Context, *openolt.Empty) (*openolt.Empty, error) {
	oltLogger.Error("CollectStatistics not implemented")
	return new(openolt.Empty), nil
}

func (o OltDevice) GetOnuInfo(context context.Context, packet *openolt.Onu) (*openolt.OnuIndication, error) {
	oltLogger.Error("GetOnuInfo not implemented")
	return new(openolt.OnuIndication), nil
}

func (o OltDevice) GetPonIf(context context.Context, packet *openolt.Interface) (*openolt.IntfIndication, error) {
	oltLogger.Error("GetPonIf not implemented")
	return new(openolt.IntfIndication), nil
}

func (s OltDevice) CreateTrafficQueues(context.Context, *tech_profile.TrafficQueues) (*openolt.Empty, error) {
	oltLogger.Info("received CreateTrafficQueues")
	return new(openolt.Empty), nil
}

func (s OltDevice) RemoveTrafficQueues(context.Context, *tech_profile.TrafficQueues) (*openolt.Empty, error) {
	oltLogger.Info("received RemoveTrafficQueues")
	return new(openolt.Empty), nil
}

func (s OltDevice) CreateTrafficSchedulers(context context.Context, trafficSchedulers *tech_profile.TrafficSchedulers) (*openolt.Empty, error) {
	oltLogger.WithFields(log.Fields{
		"OnuId":     trafficSchedulers.OnuId,
		"IntfId":    trafficSchedulers.IntfId,
		"OnuPortNo": trafficSchedulers.PortNo,
	}).Info("received CreateTrafficSchedulers")

	if !s.enablePerf {
		pon, err := s.GetPonById(trafficSchedulers.IntfId)
		if err != nil {
			oltLogger.Errorf("Error retrieving PON by IntfId: %v", err)
			return new(openolt.Empty), err
		}
		onu, err := pon.GetOnuById(trafficSchedulers.OnuId)
		if err != nil {
			oltLogger.Errorf("Error retrieving ONU from pon by OnuId: %v", err)
			return new(openolt.Empty), err
		}
		onu.TrafficSchedulers = trafficSchedulers
	}
	return new(openolt.Empty), nil
}

func (s OltDevice) RemoveTrafficSchedulers(context context.Context, trafficSchedulers *tech_profile.TrafficSchedulers) (*openolt.Empty, error) {
	oltLogger.WithFields(log.Fields{
		"OnuId":     trafficSchedulers.OnuId,
		"IntfId":    trafficSchedulers.IntfId,
		"OnuPortNo": trafficSchedulers.PortNo,
	}).Info("received RemoveTrafficSchedulers")
	if !s.enablePerf {
		pon, err := s.GetPonById(trafficSchedulers.IntfId)
		if err != nil {
			oltLogger.Errorf("Error retrieving PON by IntfId: %v", err)
			return new(openolt.Empty), err
		}
		onu, err := pon.GetOnuById(trafficSchedulers.OnuId)
		if err != nil {
			oltLogger.Errorf("Error retrieving ONU from pon by OnuId: %v", err)
			return new(openolt.Empty), err
		}

		onu.TrafficSchedulers = nil
	}
	return new(openolt.Empty), nil
}

// assumes caller has properly formulated an openolt.AlarmIndication
func (o OltDevice) SendAlarmIndication(context context.Context, ind *openolt.AlarmIndication) error {
	msg := Message{
		Type: AlarmIndication,
		Data: ind,
	}

	o.channel <- msg
	return nil
}