[SEBA-434] Replacing omci-sim with omci-lib-go
Change-Id: I499afc9ec49bb483467ea93bd6ce3077dd0ccc6e
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/ani-g.go b/vendor/github.com/opencord/omci-lib-go/generated/ani-g.go
new file mode 100644
index 0000000..022fcbf
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/ani-g.go
@@ -0,0 +1,174 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// AniGClassID is the 16-bit ID for the OMCI
+// Managed entity ANI-G
+const AniGClassID ClassID = ClassID(263)
+
+var anigBME *ManagedEntityDefinition
+
+// AniG (class ID #263)
+// This ME organizes data associated with each access network interface supported by a GPON ONU.
+// The ONU automatically creates one instance of this ME for each PON physical port.
+//
+// Relationships
+// An instance of this ME is associated with each instance of a physical PON interface.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. Its value
+// indicates the physical position of the PON interface. The first byte is the slot ID, defined in
+// clause 9.1.5. The second byte is the port ID. (R) (mandatory) (2-bytes)
+//
+// Sr Indication
+// SR indication: This Boolean attribute indicates the ONU's capability to report queue status for
+// DBA. The value true means that status reporting is available for all TCONTs that are associated
+// with the ANI. (R) (mandatory) (1-byte)
+//
+// Total TCont Number
+// Total TCONT number: This attribute indicates the total number of T-CONTs that can be supported
+// on this ANI. (R) (mandatory) (2-bytes)
+//
+// Gem Block Length
+// In all other ITU-T PON systems, the unit for queue occupancy reporting is fixed in at 4-bytes by
+// the respective TC layer specification.
+//
+// Piggyback Dba Reporting
+// (R) (mandatory) (1-byte)
+//
+// Deprecated
+// Deprecated: This attribute should be set to 0 by the ONU and ignored by the OLT. (R) (mandatory)
+// (1-byte)
+//
+// Signal Fail Threshold
+// Signal fail (SF) threshold: This attribute specifies the downstream bit error rate (BER)
+// threshold to detect the SF alarm. When this value is y, the BER threshold is 10-y. Valid values
+// are 3..8. Upon ME instantiation, the ONU sets this attribute to 5. (R,-W) (mandatory) (1-byte)
+//
+// Signal Degrade Threshold
+// Signal degrade (SD) threshold: This attribute specifies the downstream BER threshold to detect
+// the SD alarm. When this value is x, the BER threshold for SD is 10-x. Valid values are 4..10.
+// The SD threshold must be lower than the SF threshold; i.e., x-> y. Upon ME instantiation, the
+// ONU sets this attribute to 9. (R,-W) (mandatory) (1-byte)
+//
+// Arc
+// ARC: See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Arc Interval
+// ARC interval: See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Optical Signal Level
+// Optical signal level: This attribute reports the current measurement of the total downstream
+// optical signal level. Its value is a 2s complement integer referred to 1- mW (i.e., 1-dBm), with
+// 0.002 dB granularity. (R) (optional) (2-bytes)
+//
+// Lower Optical Threshold
+// Lower optical threshold: This attribute specifies the optical level the ONU uses to declare the
+// downstream low received optical power alarm. Valid values are -127 dBm (coded as 254) to 0 dBm
+// (coded as 0) in 0.5 dB increments. The default value 0xFF selects the ONU's internal policy.
+// (R,-W) (optional) (1-byte)
+//
+// Upper Optical Threshold
+// Upper optical threshold: This attribute specifies the optical level the ONU uses to declare the
+// downstream high received optical power alarm. Valid values are -127 dBm (coded as 254) to 0 dBm
+// (coded as 0) in 0.5 dB increments. The default value 0xFF selects the ONU's internal policy.
+// (R,-W) (optional) (1-byte)
+//
+// Onu Response Time
+// (R) (optional) (2-bytes)
+//
+// Transmit Optical Level
+// Transmit optical level: This attribute reports the current measurement of mean optical launch
+// power. Its value is a 2s complement integer referred to 1-mW (i.e., 1-dBm), with 0.002 dB
+// granularity. (R) (optional) (2-bytes)
+//
+// Lower Transmit Power Threshold
+// Lower transmit power threshold: This attribute specifies the minimum mean optical launch power
+// that the ONU uses to declare the low transmit optical power alarm. Its value is a 2s complement
+// integer referred to 1-mW (i.e., dBm), with 0.5-dB granularity. The default value -63.5 (0x81)
+// selects the ONU's internal policy. (R,-W) (optional) (1-byte)
+//
+// Upper Transmit Power Threshold
+// Upper transmit power threshold: This attribute specifies the maximum mean optical launch power
+// that the ONU uses to declare the high transmit optical power alarm. Its value is a 2s complement
+// integer referred to 1-mW (i.e., dBm), with 0.5-dB granularity. The default value -63.5 (0x81)
+// selects the ONU's internal policy. (R,-W) (optional) (1-byte)
+//
+type AniG struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ anigBME = &ManagedEntityDefinition{
+ Name: "AniG",
+ ClassID: 263,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ Test,
+ ),
+ AllowedAttributeMask: 0xffff,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: ByteField("SrIndication", EnumerationAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
+ 2: Uint16Field("TotalTcontNumber", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2),
+ 3: Uint16Field("GemBlockLength", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), false, false, false, 3),
+ 4: ByteField("PiggybackDbaReporting", EnumerationAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4),
+ 5: ByteField("Deprecated", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, true, 5),
+ 6: ByteField("SignalFailThreshold", UnsignedIntegerAttributeType, 0x0400, 5, mapset.NewSetWith(Read, Write), false, false, false, 6),
+ 7: ByteField("SignalDegradeThreshold", UnsignedIntegerAttributeType, 0x0200, 9, mapset.NewSetWith(Read, Write), false, false, false, 7),
+ 8: ByteField("Arc", EnumerationAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), true, true, false, 8),
+ 9: ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, true, false, 9),
+ 10: Uint16Field("OpticalSignalLevel", SignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, true, false, 10),
+ 11: ByteField("LowerOpticalThreshold", SignedIntegerAttributeType, 0x0020, 255, mapset.NewSetWith(Read, Write), false, true, false, 11),
+ 12: ByteField("UpperOpticalThreshold", SignedIntegerAttributeType, 0x0010, 255, mapset.NewSetWith(Read, Write), false, true, false, 12),
+ 13: Uint16Field("OnuResponseTime", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, true, false, 13),
+ 14: Uint16Field("TransmitOpticalLevel", SignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, true, false, 14),
+ 15: ByteField("LowerTransmitPowerThreshold", SignedIntegerAttributeType, 0x0002, 129, mapset.NewSetWith(Read, Write), false, true, false, 15),
+ 16: ByteField("UpperTransmitPowerThreshold", SignedIntegerAttributeType, 0x0001, 129, mapset.NewSetWith(Read, Write), false, true, false, 16),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ Alarms: AlarmMap{
+ 0: "Low received optical power",
+ 1: "High received optical power",
+ 2: "SF",
+ 3: "SD",
+ 4: "Low transmit optical power",
+ 5: "High transmit optical power",
+ 6: "Laser bias current",
+ },
+ }
+}
+
+// NewAniG (class ID 263) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewAniG(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*anigBME, params...)
+}