[SEBA-434] Replacing omci-sim with omci-lib-go
Change-Id: I499afc9ec49bb483467ea93bd6ce3077dd0ccc6e
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/gemportnetworkctp.go b/vendor/github.com/opencord/omci-lib-go/generated/gemportnetworkctp.go
new file mode 100644
index 0000000..be1c163
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/gemportnetworkctp.go
@@ -0,0 +1,149 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// GemPortNetworkCtpClassID is the 16-bit ID for the OMCI
+// Managed entity GEM port network CTP
+const GemPortNetworkCtpClassID ClassID = ClassID(268)
+
+var gemportnetworkctpBME *ManagedEntityDefinition
+
+// GemPortNetworkCtp (class ID #268)
+// This ME represents the termination of a GEM port on an ONU. This ME aggregates connectivity
+// functionality from the network view and alarms from the network element view as well as
+// artefacts from trails.
+//
+// Instances of the GEM port network CTP ME are created and deleted by the OLT. An instance of GEM
+// port network CTP can be deleted only when no GEM IW TP or GEM port network CTP PM history data
+// are associated with it. It is the responsibility of the OLT to make sure that the ONU
+// configuration meets this condition.
+//
+// In ITU-T G.984 systems, when a GEM port network CTP is created, its encryption state is by
+// default not encrypted. If the OLT wishes to configure the GEM port to use encryption, it must
+// send the appropriate PLOAM message. This applies equally to new CTPs and to CTPs that are re-
+// created after an MIB reset.
+//
+// In ITU-T G.987 systems, GEM ports are dynamically encrypted. If it is intended to encrypt the
+// GEM port, the OLT must configure a key ring to be used, and the key must be known to the ONU at
+// run time.
+//
+// Relationships
+// An instance of the GEM port network CTP ME may be associated with an instance of the T-CONT and
+// GEM IW TP MEs.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. (R, setbycreate)
+// (mandatory) (2-bytes)
+//
+// Port_Id
+// NOTE 1 - While nothing forbids the existence of several GEM port network CTPs with the same
+// port-ID value, downstream traffic is modelled as being delivered to all such GEM port network
+// CTPs. Be aware of potential difficulties associated with defining downstream flows and
+// aggregating PM statistics.
+//
+// T_Cont Pointer
+// T-CONT pointer: This attribute points to a T-CONT instance. (R,-W, setbycreate) (mandatory)
+// (2-bytes)
+//
+// Direction
+// Direction: This attribute specifies whether the GEM port is used for UNI-to-ANI (1), ANI-to-UNI
+// (2), or bidirectional (3) connection. (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// Traffic Management Pointer For Upstream
+// Traffic management pointer for upstream: If the traffic management option attribute in the ONU-G
+// ME is 0 (priority controlled) or 2 (priority and rate controlled), this pointer specifies the
+// priority queue ME serving this GEM port network CTP. If the traffic management option attribute
+// is 1 (rate controlled), this attribute redundantly points to the TCONT serving this GEM port
+// network CTP. (R,-W, setbycreate) (mandatory) (2-bytes)
+//
+// Traffic Descriptor Profile Pointer For Upstream
+// See also Appendix II.
+//
+// Uni Counter
+// UNI counter: This attribute reports the number of instances of UNI-G ME associated with this GEM
+// port network CTP. (R) (optional) (1-byte)
+//
+// Priority Queue Pointer For Down Stream
+// NOTE 2 - If the GEM port network CTP is associated with more than one UNI (downstream
+// multicast), the downstream priority queue pointer defines a pattern (e.g., queue number 3 for a
+// given UNI) to be replicated (i.e., to queue number 3) at the other affected UNIs.
+//
+// Encryption State
+// Encryption state: This attribute indicates the current state of the GEM port network CTP's
+// encryption. Legal values are defined to be the same as those of the security mode attribute of
+// the ONU2-G, with the exception that attribute value 0 indicates an unencrypted GEM port. (R)
+// (optional) (1-byte)
+//
+// Traffic Descriptor Profile Pointer For Downstream
+// See also Appendix II.
+//
+// Encryption Key Ring
+// Other values are reserved.
+//
+type GemPortNetworkCtp struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ gemportnetworkctpBME = &ManagedEntityDefinition{
+ Name: "GemPortNetworkCtp",
+ ClassID: 268,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xffc0,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: Uint16Field("PortId", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+ 2: Uint16Field("TContPointer", PointerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+ 3: ByteField("Direction", EnumerationAttributeType, 0x2000, 3, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
+ 4: Uint16Field("TrafficManagementPointerForUpstream", PointerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
+ 5: Uint16Field("TrafficDescriptorProfilePointerForUpstream", PointerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5),
+ 6: ByteField("UniCounter", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, true, false, 6),
+ 7: Uint16Field("PriorityQueuePointerForDownStream", PointerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7),
+ 8: ByteField("EncryptionState", EnumerationAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, true, false, 8),
+ 9: Uint16Field("TrafficDescriptorProfilePointerForDownstream", PointerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 9),
+ 10: ByteField("EncryptionKeyRing", EnumerationAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 10),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ Alarms: AlarmMap{
+ 5: "End-to-end loss of continuity",
+ },
+ }
+}
+
+// NewGemPortNetworkCtp (class ID 268) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewGemPortNetworkCtp(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*gemportnetworkctpBME, params...)
+}