diff --git a/vendor/github.com/opencord/omci-lib-go/generated/ieee802.1pmapperserviceprofile.go b/vendor/github.com/opencord/omci-lib-go/generated/ieee802.1pmapperserviceprofile.go
new file mode 100644
index 0000000..79a8b89
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/ieee802.1pmapperserviceprofile.go
@@ -0,0 +1,142 @@
+/*
+ * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ *              https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// Ieee8021PMapperServiceProfileClassID is the 16-bit ID for the OMCI
+// Managed entity IEEE 802.1p mapper service profile
+const Ieee8021PMapperServiceProfileClassID ClassID = ClassID(130)
+
+var ieee8021pmapperserviceprofileBME *ManagedEntityDefinition
+
+// Ieee8021PMapperServiceProfile (class ID #130)
+//	This ME associates the priorities of IEEE 802.1p [IEEE 802.1D] priority tagged frames with
+//	specific connections. This ME directs upstream traffic to the designated GEM ports. Downstream
+//	traffic arriving on any of the IEEE 802.1p mapper's GEM ports is directed to the mapper's root
+//	TP. Other mechanisms exist to direct downstream traffic, specifically a direct pointer to a
+//	downstream queue from the GEM port network CTP. If such an alternative is used, it should be
+//	provisioned to be consistent with the flow model of the mapper.
+//
+//	Instances of this ME are created and deleted by the OLT.
+//
+//	Relationships
+//		At its root, an instance of this ME may be associated with zero or one instance of a PPTP UNI,
+//		MAC bridge port configuration data, or any type of IW TP ME that carries IEEE 802 traffic. Each
+//		of its eight branches is associated with zero or one GEM IW TP.
+//
+//	Attributes
+//		Managed Entity Id
+//			Managed entity ID: This attribute uniquely identifies each instance of this ME. (R, setbycreate)
+//			(mandatory) (2-bytes)
+//
+//		Tp Pointer
+//			(R,-W, setbycreate) (mandatory) (2-bytes)
+//
+//		Interwork Tp Pointer For P_Bit Priority 0
+//			Interwork TP pointer for P-bit priority 0:	(R,-W, setbycreate) (mandatory) (2-bytes)
+//
+//		Interwork Tp Pointer For P_Bit Priority 1
+//			Interwork TP pointer for P-bit priority 1:	(R,-W, setbycreate) (mandatory) (2-bytes)
+//
+//		Interwork Tp Pointer For P_Bit Priority 2
+//			Interwork TP pointer for P-bit priority 2:	(R,-W, setbycreate) (mandatory) (2-bytes)
+//
+//		Interwork Tp Pointer For P_Bit Priority 3
+//			Interwork TP pointer for P-bit priority 3:	(R,-W, setbycreate) (mandatory) (2-bytes)
+//
+//		Interwork Tp Pointer For P_Bit Priority 4
+//			Interwork TP pointer for P-bit priority 4:	(R,-W, setbycreate) (mandatory) (2-bytes)
+//
+//		Interwork Tp Pointer For P_Bit Priority 5
+//			Interwork TP pointer for P-bit priority 5:	(R,-W, setbycreate) (mandatory) (2-bytes)
+//
+//		Interwork Tp Pointer For P_Bit Priority 6
+//			Interwork TP pointer for P-bit priority 6:	(R,-W, setbycreate) (mandatory) (2-bytes)
+//
+//		Interwork Tp Pointer For P_Bit Priority 7
+//			Interwork TP pointer for P-bit priority 7:	(R,-W, setbycreate) (mandatory) (2-bytes)
+//
+//		Unmarked Frame Option
+//			Untagged downstream frames are passed through the mapper transparently.
+//
+//		Dscp To P Bit Mapping
+//			NOTE - If certain bits in the DSCP field are to be ignored in the mapping process, the attribute
+//			should be provisioned such that all possible values of those bits produce the same P-bit
+//			mapping. This can be applied to the case where instead of full DSCP, the operator wishes to
+//			adopt the priority mechanism based on IP precedence, which needs only the three MSBs of the DSCP
+//			field.
+//
+//		Default P Bit Assumption
+//			Default P-bit assumption: This attribute is valid when the unmarked frame option attribute is
+//			set to 1. In its LSBs, the default Pbit assumption attribute contains the default PCP field to
+//			be assumed. The unmodified frame is then directed to the GEM IW TP indicated by the interwork TP
+//			pointer mappings. (R,-W, setbycreate) (mandatory) (1-byte)
+//
+//		Tp Type
+//			(R,-W, setbycreate) (optional) (1-byte)
+//
+type Ieee8021PMapperServiceProfile struct {
+	ManagedEntityDefinition
+	Attributes AttributeValueMap
+}
+
+func init() {
+	ieee8021pmapperserviceprofileBME = &ManagedEntityDefinition{
+		Name:    "Ieee8021PMapperServiceProfile",
+		ClassID: 130,
+		MessageTypes: mapset.NewSetWith(
+			Create,
+			Delete,
+			Get,
+			Set,
+		),
+		AllowedAttributeMask: 0xfff8,
+		AttributeDefinitions: AttributeDefinitionMap{
+			0:  Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+			1:  Uint16Field("TpPointer", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+			2:  Uint16Field("InterworkTpPointerForPBitPriority0", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+			3:  Uint16Field("InterworkTpPointerForPBitPriority1", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
+			4:  Uint16Field("InterworkTpPointerForPBitPriority2", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
+			5:  Uint16Field("InterworkTpPointerForPBitPriority3", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
+			6:  Uint16Field("InterworkTpPointerForPBitPriority4", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 6),
+			7:  Uint16Field("InterworkTpPointerForPBitPriority5", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7),
+			8:  Uint16Field("InterworkTpPointerForPBitPriority6", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 8),
+			9:  Uint16Field("InterworkTpPointerForPBitPriority7", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 9),
+			10: ByteField("UnmarkedFrameOption", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 10),
+			11: MultiByteField("DscpToPBitMapping", OctetsAttributeType, 0x0020, 24, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA"), mapset.NewSetWith(Read, Write), false, false, false, 11),
+			12: ByteField("DefaultPBitAssumption", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 12),
+			13: ByteField("TpType", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 13),
+		},
+		Access:  CreatedByOlt,
+		Support: UnknownSupport,
+	}
+}
+
+// NewIeee8021PMapperServiceProfile (class ID 130) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewIeee8021PMapperServiceProfile(params ...ParamData) (*ManagedEntity, OmciErrors) {
+	return NewManagedEntity(*ieee8021pmapperserviceprofileBME, params...)
+}