[SEBA-434] Replacing omci-sim with omci-lib-go
Change-Id: I499afc9ec49bb483467ea93bd6ce3077dd0ccc6e
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointvideoani.go b/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointvideoani.go
new file mode 100644
index 0000000..39d03e6
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointvideoani.go
@@ -0,0 +1,170 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// PhysicalPathTerminationPointVideoAniClassID is the 16-bit ID for the OMCI
+// Managed entity Physical path termination point video ANI
+const PhysicalPathTerminationPointVideoAniClassID ClassID = ClassID(90)
+
+var physicalpathterminationpointvideoaniBME *ManagedEntityDefinition
+
+// PhysicalPathTerminationPointVideoAni (class ID #90)
+// This ME represents an RF video ANI in the ONU, where physical paths terminate and physical path
+// level functions are performed.
+//
+// The ONU automatically creates an instance of this ME per port as follows.
+//
+// o When the ONU has video ANI ports built into its factory configuration.
+//
+// o When a cardholder is provisioned to expect a circuit pack of the video ANI type.
+//
+// o When a cardholder provisioned for plug-and-play is equipped with a circuit pack of the video
+// ANI type. Note that the installation of a plug-and-play card may indicate the presence of video
+// ANI ports via equipment ID as well as its type, and indeed may cause the ONU to instantiate a
+// port-mapping package that specifies video ANI ports.
+//
+// The ONU automatically deletes instances of this ME when a cardholder is neither provisioned to
+// expect a video ANI circuit pack, nor is it equipped with a video ANI circuit pack.
+//
+// Relationships
+// An instance of this ME is associated with each instance of a real or pre-provisioned video ANI
+// port.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. This 2-byte
+// number indicates the physical position of the ANI. The first byte is the slot ID (defined in
+// clause 9.1.5). The second byte is the port ID, with the range 1..255. (R) (mandatory) (2-bytes)
+//
+// Administrative State
+// Administrative state: This attribute locks (1) and unlocks (0) the functions performed by this
+// ME. Administrative state is further described in clause-A.1.6. (R,-W) (mandatory) (1-byte)
+//
+// Operational State
+// Operational state: This attribute indicates whether the ME is capable of performing its
+// function. Valid values are enabled (0) and disabled (1). (R) (optional) (1-byte)
+//
+// Arc
+// ARC: See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Arc Interval
+// ARC interval: See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Frequency Range Low
+// (R) (mandatory) (1-byte)
+//
+// Frequency Range High
+// (R) (mandatory) (1-byte)
+//
+// Signal Capability
+// (R) (mandatory) (1-byte)
+//
+// Optical Signal Level
+// (R) (optional) (1-byte)
+//
+// Pilot Signal Level
+// (R) (optional) (1-byte)
+//
+// Signal Level Min
+// Signal level min: This attribute indicates the minimum optical RF power per channel that results
+// in a CNR of 47-dBc for a channel of 4.5 MHz bandwidth at a receive optical power of -5-dBm. The
+// unit of this attribute is decibel-microwatt optical. (R) (mandatory) (1-byte)
+//
+// Signal Level Max
+// Signal level max: This attribute indicates the maximum optical RF power per channel that results
+// in a CTB of -57-dBc for an 80-channel ensemble of carriers at a perchannel optical modulation
+// index (OMI) of 3.5%. The unit of this attribute is decibel-microwatt optical. (R) (mandatory)
+// (1-byte)
+//
+// Pilot Frequency
+// (R,-W) (optional) (4-bytes)
+//
+// Agc Mode
+// (R,-W) (optional) (1-byte)
+//
+// Agc Setting
+// (R,-W) (optional) (1-byte)
+//
+// Video Lower Optical Threshold
+// NOTE - Because the power measurement returned in the optical signal level attribute has a
+// resolution of 1-dB, it is possible that the measured value could appear to be in-range, even
+// though an out-of-range alarm has been declared against a threshold with 0.1-dB resolution.
+//
+// Video Upper Optical Threshold
+// Video upper optical threshold: This attribute specifies the optical level used to declare the
+// video OOR high alarm. Valid values are -12 to +6-dBm in 0.1-dB increments, represented as a 2s
+// complement integer. (Coding -120 to +60, 0x00-= 0-dBm, 0x88-= -12.0-dBm, etc.) Upon ME
+// instantiation, the ONU sets this attribute to 0x19 (+2.5-dBm). (R,-W) (optional) (1-byte)
+//
+type PhysicalPathTerminationPointVideoAni struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ physicalpathterminationpointvideoaniBME = &ManagedEntityDefinition{
+ Name: "PhysicalPathTerminationPointVideoAni",
+ ClassID: 90,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xffff,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: ByteField("AdministrativeState", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
+ 2: ByteField("OperationalState", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), true, true, false, 2),
+ 3: ByteField("Arc", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), true, true, false, 3),
+ 4: ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, true, false, 4),
+ 5: ByteField("FrequencyRangeLow", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5),
+ 6: ByteField("FrequencyRangeHigh", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6),
+ 7: ByteField("SignalCapability", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7),
+ 8: ByteField("OpticalSignalLevel", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, true, false, 8),
+ 9: ByteField("PilotSignalLevel", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, true, false, 9),
+ 10: ByteField("SignalLevelMin", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, false, false, 10),
+ 11: ByteField("SignalLevelMax", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, false, false, 11),
+ 12: Uint32Field("PilotFrequency", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, true, false, 12),
+ 13: ByteField("AgcMode", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, Write), false, true, false, 13),
+ 14: ByteField("AgcSetting", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, Write), false, true, false, 14),
+ 15: ByteField("VideoLowerOpticalThreshold", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, Write), false, true, false, 15),
+ 16: ByteField("VideoUpperOpticalThreshold", UnsignedIntegerAttributeType, 0x0001, 0, mapset.NewSetWith(Read, Write), false, true, false, 16),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ Alarms: AlarmMap{
+ 0: "Video LOS",
+ 1: "Video OOR low",
+ 2: "Video OOR high",
+ },
+ }
+}
+
+// NewPhysicalPathTerminationPointVideoAni (class ID 90) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewPhysicalPathTerminationPointVideoAni(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*physicalpathterminationpointvideoaniBME, params...)
+}