[SEBA-434] Replacing omci-sim with omci-lib-go
Change-Id: I499afc9ec49bb483467ea93bd6ce3077dd0ccc6e
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointvideouni.go b/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointvideouni.go
new file mode 100644
index 0000000..fbd31d0
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointvideouni.go
@@ -0,0 +1,118 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// PhysicalPathTerminationPointVideoUniClassID is the 16-bit ID for the OMCI
+// Managed entity Physical path termination point video UNI
+const PhysicalPathTerminationPointVideoUniClassID ClassID = ClassID(82)
+
+var physicalpathterminationpointvideouniBME *ManagedEntityDefinition
+
+// PhysicalPathTerminationPointVideoUni (class ID #82)
+// This ME represents an RF video UNI in the ONU, where physical paths terminate and physical path
+// level functions are performed.
+//
+// The ONU automatically creates an instance of this ME per port:
+//
+// o when the ONU has RF video UNI ports built into its factory configuration;
+//
+// o when a cardholder is provisioned to expect a circuit pack of the video UNI type;
+//
+// o when a cardholder provisioned for plug-and-play is equipped with a circuit pack of the video
+// UNI type. Note that the installation of a plug-and-play card may indicate the presence of video
+// ports via equipment ID as well as its type, and indeed may cause the ONU to instantiate a port-
+// mapping package that specifies video ports.
+//
+// The ONU automatically deletes instances of this ME when a cardholder is neither provisioned to
+// expect a video circuit pack, nor is it equipped with a video circuit pack.
+//
+// Relationships
+// One or more instances of this ME are associated with an instance of a real or virtual circuit
+// pack classified as video type.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. This 2-byte
+// number indicates the physical position of the UNI. The first byte is the slot ID (defined in
+// clause 9.1.5). The second byte is the port ID, with the range 1..255. (R) (mandatory) (2-bytes)
+//
+// Administrative State
+// Administrative state: This attribute locks (1) and unlocks (0) the functions performed by this
+// ME. Administrative state is further described in clause A.1.6. (R,-W) (mandatory) (1-byte)
+//
+// Operational State
+// Operational state: This attribute indicates whether the ME is capable of performing its
+// function. Valid values are enabled (0) and disabled (1). (R) (optional) (1-byte)
+//
+// Arc
+// ARC: See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Arc Interval
+// ARC interval: See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Power Control
+// Power control: This attribute controls whether power is provided from the ONU to an external
+// equipment over the video PPTP. Value 1 enables power over coaxial cable. The default value 0
+// disables power feed. (R,-W) (optional) (1-byte)
+//
+type PhysicalPathTerminationPointVideoUni struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ physicalpathterminationpointvideouniBME = &ManagedEntityDefinition{
+ Name: "PhysicalPathTerminationPointVideoUni",
+ ClassID: 82,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xf800,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: ByteField("AdministrativeState", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
+ 2: ByteField("OperationalState", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), true, true, false, 2),
+ 3: ByteField("Arc", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), true, true, false, 3),
+ 4: ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, true, false, 4),
+ 5: ByteField("PowerControl", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, true, false, 5),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ Alarms: AlarmMap{
+ 0: "Video-LOS",
+ 1: "Video-OOR-low",
+ 2: "Video-OOR-high",
+ },
+ }
+}
+
+// NewPhysicalPathTerminationPointVideoUni (class ID 82) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewPhysicalPathTerminationPointVideoUni(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*physicalpathterminationpointvideouniBME, params...)
+}