[SEBA-434] Replacing omci-sim with omci-lib-go
Change-Id: I499afc9ec49bb483467ea93bd6ce3077dd0ccc6e
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointxdslunipart1.go b/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointxdslunipart1.go
new file mode 100644
index 0000000..fa883bc
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/physicalpathterminationpointxdslunipart1.go
@@ -0,0 +1,188 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// PhysicalPathTerminationPointXdslUniPart1ClassID is the 16-bit ID for the OMCI
+// Managed entity Physical path termination point xDSL UNI part 1
+const PhysicalPathTerminationPointXdslUniPart1ClassID ClassID = ClassID(98)
+
+var physicalpathterminationpointxdslunipart1BME *ManagedEntityDefinition
+
+// PhysicalPathTerminationPointXdslUniPart1 (class ID #98)
+// This ME represents the point where physical paths terminate on an xDSL CO modem (xTU-C). The
+// xDSL ME family is used for ADSL VDSL2 and FAST services. A legacy family of VDSL MEs remains
+// valid for ITUT G.993.1 VDSL, if needed. It is documented in [ITUT G.983.2].
+//
+// The ONU automatically creates an instance of this ME per port:
+//
+// o when the ONU has xDSL ports built into its factory configuration;
+//
+// o when a cardholder is provisioned to expect a circuit pack of the xDSL type;
+//
+// o when a cardholder provisioned for plug-and-play is equipped with a circuit pack of the xDSL
+// type. Note that the installation of a plug-and-play card may indicate the presence of xDSL ports
+// via equipment ID as well as its type, and indeed may cause the ONU to instantiate a port-mapping
+// package that specifies xDSL ports.
+//
+// The ONU automatically deletes instances of this ME when a cardholder is neither provisioned to
+// expect an xDSL circuit pack, nor is it equipped with an xDSL circuit pack.
+//
+// Relationships
+// An instance of this ME is associated with each instance of a real or pre-provisioned xDSL port.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. This 2 byte
+// number indicates the physical position of the UNI. The six LSBs of the first byte are the slot
+// ID, defined in clause 9.1.5. The two MSBs indicate the channel number in some of the implicitly
+// linked MEs, and must be 0 in the PPTP itself. This reduces the possible number of physical slots
+// to 64. The second byte is the port ID, with the range 1..255. (R) (mandatory) (2-bytes)
+//
+// Loopback Configuration
+// Upon ME instantiation, the ONU sets this attribute to 0. (R,-W) (mandatory) (1-byte)
+//
+// Administrative State
+// Administrative state: This attribute locks (1) and unlocks (0) the functions performed by this
+// ME. Administrative state is further described in clause A.1.6. (R,-W) (mandatory) (1-byte)
+//
+// Operational State
+// Operational state: This attribute indicates whether the ME is capable of performing its
+// function. Valid values are enabled (0) and disabled (1). (R) (optional) (1-byte)
+//
+// Xdsl Line Configuration Profile
+// xDSL line configuration profile: This attribute points to an instance of the xDSL line
+// configuration profiles (part 1, 2 and 3) MEs, and if necessary, also to VDSL2 line configuration
+// extensions (1 and 2) MEs, also to vectoring line configuration extension MEs. Upon ME
+// instantiation, the ONU sets this attribute to 0, a null pointer. (R,-W) (mandatory) (2-bytes)
+//
+// Xdsl Subcarrier Masking Downstream Profile
+// xDSL subcarrier masking downstream profile: This attribute points to an instance of the xDSL
+// subcarrier masking downstream profile ME. Upon ME instantiation, the ONU sets this attribute to
+// 0, a null pointer. (R,-W) (mandatory) (2-bytes)
+//
+// Xdsl Subcarrier Masking Upstream Profile
+// xDSL subcarrier masking upstream profile: This attribute points to an instance of the xDSL
+// subcarrier masking upstream profile ME. Upon ME instantiation, the ONU sets this attribute to 0,
+// a null pointer. (R,-W) (mandatory) (2-bytes)
+//
+// Xdsl Downstream Power Spectral Density Psd Mask Profile
+// xDSL downstream power spectral density (PSD) mask profile: This attribute points to an instance
+// of the xDSL PSD mask profile ME that defines downstream parameters. Upon ME instantiation, the
+// ONU sets this attribute to 0, a null pointer. (R,-W) (mandatory) (2-bytes)
+//
+// Xdsl Downstream Rfi Bands Profile
+// xDSL downstream RFI bands profile: This attribute points to an instance of the xDSL downstream
+// RFI bands profile ME. Upon ME instantiation, the ONU sets this attribute to 0, a null pointer.
+// (R,-W) (mandatory) (2-bytes)
+//
+// Arc
+// ARC: See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Arc Interval
+// ARC interval: See clause A.1.4.3. (R,-W) (optional) (1-byte)
+//
+// Modem Type
+// NOTE - Many newer VDSL2 chip sets support only PTM. The ATM default is retained for backward
+// compatibility, but implementers should be aware that the default may need to be overridden by
+// provisioning before the xDSL UNI can be brought into service.
+//
+// Upstream Psd Mask Profile
+// Upstream PSD mask profile: This attribute points to an instance of the xDSL PSD mask profile
+// that defines upstream parameters. Upon ME instantiation, the ONU sets this attribute to 0, a
+// null pointer. (R,-W) (optional) (2-bytes)
+//
+// Network Specific Extensions Pointer
+// Network specific extensions pointer: This attribute points to a network address ME that contains
+// the path and name of a file containing network specific parameters for the associated UNI. Upon
+// ME instantiation, the ONU sets this attribute to 0xFFFF, a null pointer. (R,-W) (optional)
+// (2-bytes)
+//
+type PhysicalPathTerminationPointXdslUniPart1 struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ physicalpathterminationpointxdslunipart1BME = &ManagedEntityDefinition{
+ Name: "PhysicalPathTerminationPointXdslUniPart1",
+ ClassID: 98,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xfff8,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: ByteField("LoopbackConfiguration", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
+ 2: ByteField("AdministrativeState", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, false, false, 2),
+ 3: ByteField("OperationalState", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), true, true, false, 3),
+ 4: Uint16Field("XdslLineConfigurationProfile", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, false, false, 4),
+ 5: Uint16Field("XdslSubcarrierMaskingDownstreamProfile", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5),
+ 6: Uint16Field("XdslSubcarrierMaskingUpstreamProfile", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6),
+ 7: Uint16Field("XdslDownstreamPowerSpectralDensityPsdMaskProfile", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, false, false, 7),
+ 8: Uint16Field("XdslDownstreamRfiBandsProfile", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, false, false, 8),
+ 9: ByteField("Arc", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), true, true, false, 9),
+ 10: ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, true, false, 10),
+ 11: ByteField("ModemType", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, true, false, 11),
+ 12: Uint16Field("UpstreamPsdMaskProfile", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, true, false, 12),
+ 13: Uint16Field("NetworkSpecificExtensionsPointer", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, Write), false, true, false, 13),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ Alarms: AlarmMap{
+ 0: "NE LOF",
+ 1: "NE LOS",
+ 2: "NE LOL",
+ 3: "NE LPR",
+ 4: "Card alm",
+ 5: "FE LOF",
+ 6: "FE LOS",
+ 7: "FE LOL",
+ 8: "FE LPR",
+ 9: "DRT up",
+ 10: "DRT down",
+ 11: "LINIT",
+ 12: "LCD",
+ 13: "NCD",
+ 14: "LCD-FE",
+ 15: "NCD-FE",
+ 16: "File not found",
+ 17: "OOS",
+ 18: "OOS-FE",
+ 19: "LOR",
+ 20: "LOM",
+ 21: "LOR-FE",
+ 22: "LOM-FE",
+ },
+ }
+}
+
+// NewPhysicalPathTerminationPointXdslUniPart1 (class ID 98) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewPhysicalPathTerminationPointXdslUniPart1(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*physicalpathterminationpointxdslunipart1BME, params...)
+}